[GPUC] GPU Coin | Mandatory Wallet Update

[trademark]

Ok, just saw that and read the full thread. I am exciged about ghis coin and I am sure I am not the only one who missed the IPO. Maybe if the community is OK with that and another guys agree to invest as well so that we get in total at least 10BTC would be nice for the project. I am quite sure demand for cards will be higher than initial quality which will be able to get bought with the money from the IPO, so IMO the more, the better. But anyway, I know I am late so I am asking for a fvour here, so decision is in the hands of dev and community.
PS. I want to invest 1.5 BTC.

Sure. You can invest your 1.5BTC here. https://bitcointalk.org/index.php?topic=496045.new#new

[gerbill2]

this sucks when i invested as IPO  it said this would be a scrypt coin :s  im using a lot of 6950's with 450khs+ but they only do 150 khs on n scrypt  this is not fair =(

any GPU will do half the hashrate when mining scrypt-n coins compared to regular scrypt coins. You are not losing anything here.

[Jestah]

I'd like to visit one of these pools where they actually acknowledged it is a script-n coin.  I can see it now.... I get set up with one of them and they aren't ready and I miss out.

[tagged]

Changed Auction end time to 6pm, hopefully IPO coins are delivered by then, this will reduce risk for bidders and if the coin/wallet are not out by then people can wait to send payment until after wallet is up and running.

Get GPUCoins Now!  Auctioning off 5,000,000 GPUCoins!

https://bitcointalk.org/index.php?topic=496045.new#new

Happy Bidding!

Auction Details:
5 x 1,000,000 GPUCoins  (for those who missed the IPO, or want more)
Auction ends at 6pm today est.
Starting bid is BTC.5 for 1,000,000.

(only bit on the thread above, I do not want to spam this board)

[1211]

You get R9 290x cheaper, for only 516€ at dinokomp.at .

[lottohasher]

My scrypt-n settings for sapphire 7950 and tri x r9 290 if this helps anyone (combined 760 kh/s) tested on vertcoin.

7950 -   thread-concurrency 14336 memclock 1500 gpu-engine 1080 gpu-powertune 8 gpu-fan 50-100  (310 kh/s)

tri x r9 290 - thread-concurrency 20481 memclock 1500 gpu-engine 1050 gpu-powertune 8 gpu-fan 50-100 (450 kh/s)

Cheers

[gerbill2]

I'd like to visit one of these pools where they actually acknowledged it is a script-n coin.  I can see it now.... I get set up with one of them and they aren't ready and I miss out.

you may setup and test your vertminer settings at http://gpu.pool.mn (it is currently mining panda scrypt-n coin for testing. When GPU Coin launches the pool will automatically switch to it, so you will not have to change anything)

[Bobaf3tt]

Before attempting anything you need to get a custom miner for Scrypt-N.

=> http://vertcoin.org/#mining

It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!

The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:

280X at about 370KH/s (8GB System RAM):

color 0A
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90

HD7950 at about 315KH/s (12GB System RAM):

color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080

If you think this was useful to you consider mining for me while you test your optimal settings

vertminer.exe -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u b0ss.kindminer -p kindminer

tried your settings but can't get more than 290-300 with my 280X, is this because of only 4Gb ram system ?

[xhash]

I'd like to visit one of these pools where they actually acknowledged it is a script-n coin.  I can see it now.... I get set up with one of them and they aren't ready and I miss out.

join us ^^

[pastet89]

this sucks when i invested as IPO  it said this would be a scrypt coin :s  im using a lot of 6950's with 450khs+ but they only do 150 khs on n scrypt  this is not fair =(

WTB your share up to 1.5btc.

[Pelk]

Before attempting anything you need to get a custom miner for Scrypt-N.

=> http://vertcoin.org/#mining

It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!

The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:

280X at about 370KH/s (8GB System RAM):

color 0A
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90

HD7950 at about 315KH/s (12GB System RAM):

color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080

If you think this was useful to you consider mining for me while you test your optimal settings

vertminer.exe -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u b0ss.kindminer -p kindminer

tried your settings but can't get more than 290-300 with my 280X, is this because of only 4Gb ram system ?

i get 400khas with my asus 280x and i have only 4gb ram !

[anarchyx]

Someone should make Cuda coin that gives Nvidia upper hand.  Would be unique and drastically change the view on GPU mining hardware.

[trademark]

I'd like to visit one of these pools where they actually acknowledged it is a script-n coin.  I can see it now.... I get set up with one of them and they aren't ready and I miss out.

you may setup and test your vertminer settings at http://gpu.pool.mn (it is currently mining panda scrypt-n coin for testing. When GPU Coin launches the pool will automatically switch to it, so you will not have to change anything)

Good idea. Hopefully you pick up a lot of miners.

[balanghai]

Any prediction how much per coin would cost after two weeks?

[minergr]

Before attempting anything you need to get a custom miner for Scrypt-N.

=> http://vertcoin.org/#mining

It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!

The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:

280X at about 370KH/s (8GB System RAM):

color 0A
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90

HD7950 at about 315KH/s (12GB System RAM):

color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080

If you think this was useful to you consider mining for me while you test your optimal settings

vertminer.exe -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u b0ss.kindminer -p kindminer

tried your settings but can't get more than 290-300 with my 280X, is this because of only 4Gb ram system ?

i get 400khas with my asus 280x and i have only 4gb ram !

a little over 350 here with tc 8192, gpu engine 1000 and powertune -20. I'll give these settings a try and report the results.

[sixteendigits]

this sucks when i invested as IPO  it said this would be a scrypt coin :s  im using a lot of 6950's with 450khs+ but they only do 150 khs on n scrypt  this is not fair =(

And everybody else's hashrates are lower as well.  What's the problem?

[freeloader1969]

I have 4 x 6970's that I can't get to mine correctly.  My other machine has two 6970's and it's mining fine at 550 kh/s (275kh/s per card).

Is Scrypt-N dependant on system ram or GPU ram?  The four card machine has 4GB in it and the 2 card machine has 8GB.  Suggestions?

Code working good with 2 cards, but not 4.

Code:

"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8000",
"temp-cutoff" : "90",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0",
"shaders" : "1536",
"scrypt-vert" : true
}

[UltraPool]

I'd like to visit one of these pools where they actually acknowledged it is a script-n coin.  I can see it now.... I get set up with one of them and they aren't ready and I miss out.

We have a news post showing how to mine Scrypt-N. I'm not sure if that's what you're looking for, though. Our stratum is set up for Scrypt-N. We were testing it last night with Vertcoin.

[trademark]

IPOs, speak up about the exchanges.  Our CEO listens to the community as we have seen.  I say, lets wait until the store opens before we hit the exchanges  and let's go for the big exchanges.  Not the little ones that have been losing peoples coins or charging to be on it.  


  

Quote me and agree or disagree. Let's keep this going so the CEO sees it! This is going to be the hottest coin launched in a while.

[PrizZzrak]

please give settings for 270x cards...