lolmining
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 02:02:50 AM |
|
well you might want to remove that link so no one else clicks it.
I will not. Miner is working just fine.
|
|
|
|
SeriousJohn
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 02:20:04 AM |
|
i'd like to report that neither NemosMiner nor MultiPoolMiner get the correct profit data(btc/gh/day) and switching to less profitable algorithms. I reseted profit data several times on both.
|
|
|
|
SeriousJohn
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 02:28:27 AM |
|
i'd like to report that neither NemosMiner nor MultiPoolMiner get the correct profit data(btc/gh/day) and switching to less profitable algorithms. I reseted profit data several times on both.
They seem to have a very long delay now
|
|
|
|
poby
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 02:51:02 AM |
|
Mining BTG for an hour, still no sign of earnings? It shows the hashrate reasonably accurately (7Kh/s), but zero earnings so far. Nothing unconfirmed, nothing at all. Is this normal for Bitcoin Gold?
|
|
|
|
Infpwnz
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 02:52:27 AM |
|
Mining BTG for an hour, still no sign of earnings? It shows the hashrate reasonably accurately (7Kh/s), but zero earnings so far. Nothing unconfirmed, nothing at all. Is this normal for Bitcoin Gold?
Yes, completely normal, as long as ur hashrate is showing accurately you'll get ur btg. it took me 6 hours once to update. Don't worry about it
|
|
|
|
betiteh0777
Newbie
Offline
Activity: 133
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 03:35:07 AM |
|
Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power and profit (according to my calculations). You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it). Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far. The miner I use is best for algo lyra2z not for -a lyra2re2 I do mine Zcoin which uses lyra2z. I use 23.21.13.8859 from 05/12/2017 NVIDIA driver already now (as you suggested) but don't see any major difference in hashrate in compare to NVIDIA driver version 23.21.13.8843 from 27/11/2017
|
|
|
|
manicdan
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 03:51:52 AM |
|
By the way, I hate the way Microsoft updates production machines while they are working. Next, I hate that afterburner doesn't necessarily restart the fan settings. Sigh...
That's why you don't use Windows on mining rigs. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I have 8 GPUs on my Windows 10 rig, I just turn off the miner for the primary 1080ti, and turn on whatever game I want. Right now its Destiny 2. Thing is rock solid cause I do minimal overclocking, and have plenty of PSU power spare for loading up the CPU if needed. People crack up when they see me jumping between gaming and mining like its nothing. I do need to disable all of the automatic updates. Damn fall creative update cost me 30$ in lost mining, plus hours of my time fixing drivers and settings. I tried the whole linux thing, and I couldnt get it to boot ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
mtx_demon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 03:53:13 AM |
|
Anybody using EthOS??
I am wondering how I need to setup my ccminer to auto switch
just list like proxypool1 proxypool2?? should be enough to the auto switch?
|
|
|
|
vertices
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 04:22:47 AM |
|
NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin. I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good. https://imgur.com/a/cC3G5I also get a bunch of red errors about NiceHash. I did delete the 2 Nicehash.ps1 files. I was told to remove them. https://imgur.com/a/0HcsWThis is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti. Trying to get problems resolved before I move that miner off of VTC. Versions: MultiPoolMinerV2.7.0.2 Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64 This is my batch file to start it. setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog" Here's a log file. http://ge.tt/37QdNhn2Worker Job config at MPH: NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein I tried searching this thread for excavator but only found 1 unrelated response. I feel like I missed something stupid somewhere. Thanks in advance.
|
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 04:28:45 AM |
|
NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin. I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good. https://imgur.com/a/cC3G5I also get a bunch of red errors about NiceHash. I did delete the 2 Nicehash.ps1 files. I was told to remove them. https://imgur.com/a/0HcsWThis is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti. Trying to get problems resolved before I move that miner off of VTC. Versions: MultiPoolMinerV2.7.0.2 Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64 This is my batch file to start it. setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog" Here's a log file. http://ge.tt/37QdNhn2Worker Job config at MPH: NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein I tried searching this thread for excavator but only found 1 unrelated response. I feel like I missed something stupid somewhere. Thanks in advance. You've deleted the NiceHash API. "Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."
|
|
|
|
vertices
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 04:44:24 AM |
|
You've deleted the NiceHash API.
"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."
Awesome! That fixed that. Thank you very much! I guess I was only supposed to delete the Nashhash.ps1 file in the Pools folder. Any ideas about the big discrepancies between what MPH says is the best and what MPM thinks I should mine? I had to disable Lyra2z to get it stop mining Zcoin. There are still some pretty decent discrepancies but at least Feather and Monacoin are coming in up top now.
|
|
|
|
Lercker
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 04:48:47 AM |
|
You've deleted the NiceHash API.
"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."
Awesome! That fixed that. Thank you very much! I guess I was only supposed to delete the Nashhash.ps1 file in the Pools folder. Any ideas about the big discrepancies between what MPH says is the best and what MPM thinks I should mine? I had to disable Lyra2z to get it stop mining Zcoin. There are still some pretty decent discrepancies but at least Feather and Monacoin are coming in up top now. MPM mines what is best for your hash rate. MPH's profit switching is generalized and does not take your hash rate in to account. Also you do not need an active hub switch to run MPM.
|
|
|
|
SuperDerpBro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 07:06:17 AM |
|
Any tips on mining cryptonight? Tried it on a couple machines one has an AMD card other some 1060s. Kills the driver on both. Nvidia rig it is almost instant, every time, and the PC with the AMD card takes a while. Even at stock clocks (both machines)
|
|
|
|
Cryptographertm
Newbie
Offline
Activity: 54
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 07:58:17 AM |
|
Does anyone know where we can view the auto exchange pool balances (total) for each coin outgoing to exchange?
I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.
thanks.
|
|
|
|
alanon09
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 08:07:32 AM |
|
Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!
[ {"time":0,"commands":[ {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]} ]}, {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]} ]}, {"time":10,"loop":10,"commands":[ {"id":1,"method":"worker.print.speed","params":["0"]}, {"id":1,"method":"algorithm.print.speeds","params":["0"]} ]}
|
|
|
|
Little Miner
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 08:12:31 AM |
|
Does anyone know where we can view the auto exchange pool balances (total) for each coin outgoing to exchange?
I really just want to be able to see which ones have the most volume at the time so i dont pick a coin for auto exchange and no one else is using it so I have to wait 3 days.
thanks.
Which option did you choose for AutoExchange? Which coin you wanna mining?
|
|
|
|
Little Miner
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 08:19:02 AM |
|
Any tips on mining cryptonight? Tried it on a couple machines one has an AMD card other some 1060s. Kills the driver on both. Nvidia rig it is almost instant, every time, and the PC with the AMD card takes a while. Even at stock clocks (both machines)
What is your graphic cards and core freq? Amd cards on crypto needs higher core freq for better performance and GTX 1060 is not profit on crypto.
|
|
|
|
skeletounek
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 08:22:51 AM |
|
hi, I have configured the hub workers and now I'm mining with auto exhange turned on, but please tell me where I can see the activity of hub workers (need to know if some of worker stop mining and need to be restarted). Thx
|
|
|
|
Little Miner
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 08:26:19 AM |
|
Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!
[ {"time":0,"commands":[ {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]} ]}, {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]} ]}, {"time":10,"loop":10,"commands":[ {"id":1,"method":"worker.print.speed","params":["0"]}, {"id":1,"method":"algorithm.print.speeds","params":["0"]} ]}
Use of the Claymore for mine daggerhashimoto on Nvidia cards.
|
|
|
|
aaronsace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 12, 2017, 08:30:13 AM |
|
Hello, help me please, how can I set up the Excavator for Miningpoolhub? For example for ETC? I enclose the configuration file but it does not work. What am I doing wrong? Thank you!
[ {"time":0,"commands":[ {"id":1,"method":"algorithm.add","params":["daggerhashimoto","europe.ethash-hub.miningpoolhub.com:20555","alanon.rig"]} ]}, {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]} ]}, {"time":10,"loop":10,"commands":[ {"id":1,"method":"worker.print.speed","params":["0"]}, {"id":1,"method":"algorithm.print.speeds","params":["0"]} ]}
NiceHash blocked MiningPoolHub; MultiPoolMiner works with Excavator miner and can bypass the block.
|
|
|
|
|