[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Lercker]

Guys, there's a notification bar at the top of the page that has said clearly for half a day that DB is being upgraded and reporting is either slow or not happening.

As a side-note, admin probably shouldn't use it to keep those "use multipool and you can use auto-switch" messages all the time because when it's the same information you start to ignore the whole element. At least separate important notifications with red color or something that they stick to the eye.

I agree. I'll move or change that text and make notice bar simple.
Thanks.

Although, multipoolminer did deserve being there, the exposure.

MiningPoolHub you should list multipoolminer in your Quick Start Guide on your main page, that way it can be found with out being obnoxious in your announcement area.

[1715249579]

1715249579

[1715249579]

1715249579

[1715249579]

1715249579

[1715249579]

1715249579

[nu1mlock]

Now when auto exchange is enabled, do they cost the higher txfee as well for ETH auto exchange or is the higher txfee only for ETH withdrawals?

[xs.over]

miningpoolhub, How to set static stratum difficulty on feathercoin pool?

[miningpoolhub]

@miningpoolhub is there any way to get user balance via API?

getuserbalance will work.

Here's manual from github.
https://github.com/MPOS/php-mpos/wiki/API-Reference

[miningpoolhub]

Well, things like this can happen, it is out of your control that an exchange does not function as normal, it is part of the "package" with auto exchange. You shouldn't need to pay out these coins from your own pocket. BTW, I also have some coins stuck on exchange before anybody jumps on me.

Although, multipoolminer did deserve being there, the exposure.

Please don't forget about Decred, Pascal and LBRY.

I already distributed ZCL to all accounts. There were many requests 

Multipoolminer is quite difficult problem. I like to expose it as possible but notice bar doesn't seem to be the right place.
Anyway I wrote it again.
Maybe moving to QUICK START GUIDE column would be better at some point.


Yeah, I don't forget those coins.

[miningpoolhub]

Hi miningpoolhub
I am reading the dev have done a fork of ZCL and ZEN

https://bittrex.zendesk.com/hc/en-us/articles/115000201171-Support-for-the-ZEN-Hardfork

and the wallet and software need be updated
https://blog.zensystem.io/

That why Bittrex close down zcl/zen wallet

Well it's a bit old news.
Zen launched at the end of May and traded on Bittrex for few days.

After that, zen dev splitted. I don't know about inner story.


I also don't know why Bittrex disabled two wallets but there's nothing we can do currently. Just waiting now.

[miningpoolhub]

Now when auto exchange is enabled, do they cost the higher txfee as well for ETH auto exchange or is the higher txfee only for ETH withdrawals?

There's no txfee for auto exchange. Pool will pay them.
Currently ETH withdrawal is only affected.

[miningpoolhub]

miningpoolhub, How to set static stratum difficulty on feathercoin pool?

There's no way to set static diffculty for feathercoin currently.
Feathercoin is not short block time coin like digibyte or myriadcoin.

You will not get any benefit by setting static difficulty AFAIK.

[miningpoolhub]

Guys, there's a notification bar at the top of the page that has said clearly for half a day that DB is being upgraded and reporting is either slow or not happening.

As a side-note, admin probably shouldn't use it to keep those "use multipool and you can use auto-switch" messages all the time because when it's the same information you start to ignore the whole element. At least separate important notifications with red color or something that they stick to the eye.

I agree. I'll move or change that text and make notice bar simple.
Thanks.

Although, multipoolminer did deserve being there, the exposure.

MiningPoolHub you should list multipoolminer in your Quick Start Guide on your main page, that way it can be found with out being obnoxious in your announcement area.

I'll decide it tomorrow. Too many things to take care currently after DB upgrade.

Thanks for your suggestion.

[Etherion]

I have 25+ ZCL with status "On Exchange" for the past 6+ hours. Does it normally take that long to auto exchange? If possible, cancel the exchange and I'll handle it myself. I know Bittrex has some wallet issues with ZCL at the moment.

Bittrex's wallet is in maintenance mode and ZCL is not confirmed for few days now.
Auto exchange can't work if Bittrex doesn't confirm it. Also pool can't withdraw them.

I don't know how long Bittrex will run like this.
I think I have to cancel auto exchange and credit ZCL to each account from my pocket.

Well, things like this can happen, it is out of your control that an exchange does not function as normal, it is part of the "package" with auto exchange. You shouldn't need to pay out these coins from your own pocket. BTW, I also have some coins stuck on exchange before anybody jumps on me.

Guys, there's a notification bar at the top of the page that has said clearly for half a day that DB is being upgraded and reporting is either slow or not happening.

As a side-note, admin probably shouldn't use it to keep those "use multipool and you can use auto-switch" messages all the time because when it's the same information you start to ignore the whole element. At least separate important notifications with red color or something that they stick to the eye.

I agree. I'll move or change that text and make notice bar simple.
Thanks.

Although, multipoolminer did deserve being there, the exposure.

Hi,

Do you think to add some new coin ?
Zencash, Hush, Komodo, Ubiq.

I'm not sure at this moment.

Zencash wallet is disabled in Bittrex, and developer splitted.

Maybe I'll add Ubiq.
Hush, Komodo is my one of the profitability monitoring coin too.

Please don't forget about Decred, Pascal and LBRY.

++Decred, Pascal and LBRY.

[tperalta82]

Hey guys

Anyone else having issues connecting to europe.ethhash-hub.miningpoolhub.com:17020?

3 of my rigs are having issues (on different locations)

[fonyo]

Hey guys

Anyone else having issues connecting to europe.ethhash-hub.miningpoolhub.com:17020?

3 of my rigs are having issues (on different locations)

Same problem here.

I have the same problem. What should I do? To change the port to 12020?

Yep, I can confirm.

Boss, can we use safe-hub.miningpoolhub.com for any of the ports? @miningpoolhub

UPDATE: port 12020 is back up

[natan069]

My Feathercoin balance is not showing in the menu "Balances" with all other coins.

[BTCGambler]

Hello

i just started mining SiaCoins 24h ago and now it shows I have 16 coins (onconfirmed) in my wallet.

How long do i have to wait or what do i have to do, so that the coins will be confirmed and I can cash them out?

thanks

[fonyo]

Hello

i just started mining SiaCoins 24h ago and now it shows I have 16 coins (onconfirmed) in my wallet.

How long do i have to wait or what do i have to do, so that the coins will be confirmed and I can cash them out?

thanks

Cross-check the block numbers and their numbers of confirmations remaining on Siacoin's blocks page with the ones you have shares in on the transactions page (first and last). I think you should see a few getting confirmed soon.

[meesmustas]

Hei

I have a problem. I am using mining pool hub first time and i got errors like this:

PS>TerminatingError(Split-Path): "Cannot bind argument to parameter 'Path' because it is null."
Split-Path : Cannot bind argument to parameter 'Path' because it is null.
At C:\Users\i5 K\Downloads\MultiPoolMiner-master\MultiPoolMiner-master\MultiPoolMiner.ps1:114 char:28
+             if((Split-Path $Miner.URI -Leaf) -eq (Split-Path $Miner.P ...
+                            ~~~~~~~~~~
    + CategoryInfo          : InvalidData: ( [Split-Path], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.SplitPathComm


What could be wrong with my setup?

[fonyo]

Hei

I have a problem. I am using mining pool hub first time and i got errors like this:

PS>TerminatingError(Split-Path): "Cannot bind argument to parameter 'Path' because it is null."
Split-Path : Cannot bind argument to parameter 'Path' because it is null.
At C:\Users\i5 K\Downloads\MultiPoolMiner-master\MultiPoolMiner-master\MultiPoolMiner.ps1:114 char:28
+             if((Split-Path $Miner.URI -Leaf) -eq (Split-Path $Miner.P ...
+                            ~~~~~~~~~~
    + CategoryInfo          : InvalidData: ( [Split-Path], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.SplitPathComm


What could be wrong with my setup?

This is not related to pool but MPM. Have you amended the start.bat? Are you running it as administrator? Is your firewall blocking connections to MPH? Open an issue here so we can help:
https://github.com/aaronsace/MultiPoolMiner/issues

[MegaKill]

Hi, sorry for noob question or had been asked before. I am mining myr-gr algo (DGB), my miner ccminer shows +-74mhs, but MPH dashboard shows only 8-9mhs something. What's wrong? Thanks for clarifying.

[miningpoolhub]

++Decred, Pascal and LBRY.

Thank you for suggestion.


Maybe NOMP pool source bounty program would be helpful.
Is there anyone who want to make nomp pool compatible to DCR, Pascal, or LBRY???

[miningpoolhub]

Hey guys

Anyone else having issues connecting to europe.ethhash-hub.miningpoolhub.com:17020?

3 of my rigs are having issues (on different locations)

Same problem here.

I have the same problem. What should I do? To change the port to 12020?

Sorry. There was huge DDoS attack targeting Ethereum pool servers.
I recommend you to set failover to other region servers and other pools. Don't rely on one pool these days.