[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[kingzero753]

Zclassic wallet on bittrex works again. Are you going to enable auto exchange now that it works?

[TunerDude007]

Something wrong with zcash auto-exchange?

It doesn't send coins automatically.

All tabs on "On" on auto-exchange page.

Amount waiting for auto exchange is not that big currently. Waiting more coins to send to exchange sites.

I hope more miners to come.

Ok, Thanks.

Would it be possible to make button for downloading full Transaction action history? daily credits would be enough too.

I need those for taxes (In my country taxes are paid by the date that coins were mined and the value is taken from that day).

And you could maybe change the "Latest news"  to "Crypto news" ?

Pay taxes?? How would they know if you never tell them?

[anoraknophobia]

Something wrong with zcash auto-exchange?

It doesn't send coins automatically.

All tabs on "On" on auto-exchange page.

Amount waiting for auto exchange is not that big currently. Waiting more coins to send to exchange sites.

I hope more miners to come.

Ok, Thanks.

Would it be possible to make button for downloading full Transaction action history? daily credits would be enough too.

I need those for taxes (In my country taxes are paid by the date that coins were mined and the value is taken from that day).

And you could maybe change the "Latest news"  to "Crypto news" ?

Pay taxes?? How would they know if you never tell them?

Some day you want your country currency out of the coins. At that point they will notice it

[kamerico]

Hello,

I have so many questions as I have been mining only for a week but in zpool. I wanted to try your pool but I have so many questions and I did probably did so many mistakes so far. My user ID is: 63484. So first I have so far 2 GTX 1080 TI and I am running MultiPoolMiner.

1) Now the question would be is that I was playing around yesterday and I didn't setup any auto exchanged but later to zcash. Now I have all of these coins and I don't know if I have to manually withdraw or hit the credited for auto exchange. Or if I have to go back to disable the auto exchange coins so that I can withdraw the minimum?

2) If I am mining equihash I can go and hit monitor on my worker and I will get an email if it's idle. Will I get idle emails from all of the algo or just that one?

3) Is there a way for me to see on the main page the dashboard for where my miner is working on? Ex: algo X Hash/s without having to look in the computer and then hit the designated x.miningpoolhub page?

4) I saw in the thread that zcash there has to be a minimum to withdraw. I am currently trying to see how much I can make in a day before deciding but it doesn't look good at all I think. Is there an api or something to know how much in zcash I've done so far estimated? Thanks

[rozsada]

Is it possible to set RemoteManager for monitoring 2 rigs with external ip? They have different local ip.
Could anybody help me?
Thanks

[miningpoolhub]

Something wrong with zcash auto-exchange?

It doesn't send coins automatically.

All tabs on "On" on auto-exchange page.

Amount waiting for auto exchange is not that big currently. Waiting more coins to send to exchange sites.

I hope more miners to come.

Ok, Thanks.

Would it be possible to make button for downloading full Transaction action history? daily credits would be enough too.

I need those for taxes (In my country taxes are paid by the date that coins were mined and the value is taken from that day).

And you could maybe change the "Latest news"  to "Crypto news" ?

You can request me the daily profit excel file and I'll give you via email.
I think it would need some time to implement downloading full transaction history.

Also I'll change latest news to crypto news someday. Or maybe I would remove that box completely.

[miningpoolhub]

Anyone else having issues when connected to 17001? I see the blocks passing by, but cant find any details on my hub worker ( or what its earnings are )

I'm kinda new to this pool, so could just be me


Late edit..:
oddly enough with many manual ports im also experiencing other issues ( low diff etc) , ill bet its something on my side..

if you are using 17001, it's not using hub feature. You have to check at each pool that you are currently mining.
Also it would need quite long time to get earnings if you are mining low hashrate pools.

[miningpoolhub]

Hello,

I have a problem on 5 miners, ALL shares have been rejected since this morning, while on other 5 all ok, identical systems, hardware different but all worked fine until this morning.

THANKS!

What coin are you mining?
What port?
What region?

What is the reject reason?

[miningpoolhub]

Zclassic wallet on bittrex works again. Are you going to enable auto exchange now that it works?

Yeah Enabled it.

[miningpoolhub]

I had 61900 round share in zcash pool last found block 132835, and 5 times more time as same 108 Khash/s on block 132706。but 132835 no my CREDITS，and 132706 only have 0.09793048 zcash  。
what wrong with it？

my username is cai096

i mine zcash begin 16/06 03:49 UTC，the 132706 block was found at 16/06 04:50 UTC, ZEC Estimates 0.22+- ,but only 0.09 . then 04:59 UTC end mine,the 132835 block have 61900+ share,but no profits。

132660 block was found at 16/06 03:00:07 (UTC)
132706 block was found at 16/06 04:50:25 (UTC)
132835 block was found at 16/06 10:58:02 (UTC)

And you mined from 03:49 UTC to 04:59 UTC

It mean that you joined at the middle of 132706 mining and left right after that block is found.
Pool uses PPLNS which benefits longer miners by its logic and punishes early leaving miners.

Also as you only mined short period of time, it can be very far from your expected earnings. Zcash pool finds about 5~8 blocks these days which means you would come and go at unlucky times.

[miningpoolhub]

Hello,

I have so many questions as I have been mining only for a week but in zpool. I wanted to try your pool but I have so many questions and I did probably did so many mistakes so far. My user ID is: 63484. So first I have so far 2 GTX 1080 TI and I am running MultiPoolMiner.

1) Now the question would be is that I was playing around yesterday and I didn't setup any auto exchanged but later to zcash. Now I have all of these coins and I don't know if I have to manually withdraw or hit the credited for auto exchange. Or if I have to go back to disable the auto exchange coins so that I can withdraw the minimum?

2) If I am mining equihash I can go and hit monitor on my worker and I will get an email if it's idle. Will I get idle emails from all of the algo or just that one?

3) Is there a way for me to see on the main page the dashboard for where my miner is working on? Ex: algo X Hash/s without having to look in the computer and then hit the designated x.miningpoolhub page?

4) I saw in the thread that zcash there has to be a minimum to withdraw. I am currently trying to see how much I can make in a day before deciding but it doesn't look good at all I think. Is there an api or something to know how much in zcash I've done so far estimated? Thanks

1) You can move your coins from "Normal wallet" to "Wallet for Auto Exchange" at each pool's wallet page.
Check coin's balances at Balances page after login.
https://miningpoolhub.com/?page=account&action=balances
Click Manage Wallet to go to each pool's wallet page. Click right arrow button at TRANSFER section and you will see those coins moved few minutes later.

2) Only one. Monitoring works for each pool. So it's useless if you are using auto switching thing.
It's on my TODO list.

3) No. It's on my TODO list too.

4) Hmm. Maybe check Pool page.
https://zcash.miningpoolhub.com/index.php?page=statistics&action=pool

You will see your expected earnings based on KH/s and some other statistics.

[fonyo]

Zclassic wallet on bittrex works again. Are you going to enable auto exchange now that it works?

Yeah Enabled it.

Does that mean the Zen devs have finally resolved the vulnerability?

[ilitirit]

Does anyone have a video or guide that shows what the standard behaviour of Multipoolminer should be?  When I run it on my one rig it starts up several copies of the same miner concurrently with different parameters (most probably coinciding with the *.ps1 miner files). 

For example, it runs:
Excavator0.ps1
Excavator1.ps1
Excavator2.ps1
Excavator3.ps1
Excavator4.ps1
etc...

all at the same time.

This basically kills all performance on the rig and it shows 0 H/s per card.  I usually end up having to perform a hard-reset.  Are there some configuration steps I'm missing, or is this just the default behaviour and I should just let it run?

[aaronsace]

Does anyone have a video or guide that shows what the standard behaviour of Multipoolminer should be?  When I run it on my one rig it starts up several copies of the same miner concurrently with different parameters (most probably coinciding with the *.ps1 miner files). 

For example, it runs:
Excavator0.ps1
Excavator1.ps1
Excavator2.ps1
Excavator3.ps1
Excavator4.ps1
etc...

all at the same time.

This basically kills all performance on the rig and it shows 0 H/s per card.  I usually end up having to perform a hard-reset.  Are there some configuration steps I'm missing, or is this just the default behaviour and I should just let it run?

Launching 6 miners won't be the reason that your pc is dying as each of those miners are set to a one single device. Remove any miners that you are having issues with on your system from the folder called 'miners'.

Also, use the 'start.bat' example to limit which algorithms that you want to use for a quicker benchmark.

[ilitirit]

Launching 6 miners won't be the reason that your pc is dying as each of those miners are set to a one single device.

Maybe that would explain it.  It's probably starting a miner on the integrated GPU and that basically renders me unable to use the machine at all.  I would record a vid to show the behaviour, but it's simply not possible under those conditions.  As the 3rd miner starts up it basically starts printing 1 ascii character at a time in the console...

I'll tweak the PS1 files to get it to ignore the IGPU.

[ATCkit]

Would love to have the graphs back. I like to check my rigs' 24 hr performance.

[nitrobg]

Is it possible to exclude ETH from ethash auto algo switch (port 17020)? R9 280X can mine EXP and MUSIC just fine but the memory is not enough for ETH/ETC and I get quite low hash rates that way.

[aaronsace]

Is it possible to exclude ETH from ethash auto algo switch (port 17020)? R9 280X can mine EXP and MUSIC just fine but the memory is not enough for ETH/ETC and I get quite low hash rates that way.

I think I'll add an option for doing that on MultiPoolMiner.

[Jaerin]

Does anyone have a video or guide that shows what the standard behaviour of Multipoolminer should be?  When I run it on my one rig it starts up several copies of the same miner concurrently with different parameters (most probably coinciding with the *.ps1 miner files). 

For example, it runs:
Excavator0.ps1
Excavator1.ps1
Excavator2.ps1
Excavator3.ps1
Excavator4.ps1
etc...

all at the same time.

This basically kills all performance on the rig and it shows 0 H/s per card.  I usually end up having to perform a hard-reset.  Are there some configuration steps I'm missing, or is this just the default behaviour and I should just let it run?

Took me a bit to realize this, and you may already know, but each of those are set to start a miner on the GPU of the number following the file.  I was noticing on my main box that it would start miners that wouldn't have a stratum address and it wasn't until I realized that it was using GPU 0-4, but I only have 2 GPU's on this machine.   Once I deleted the others it ran much better.  Although I still noticed that doing per device stuff seemed to cause various hangs and other issues.  I ended up just using a single file and took out the ThreadIndex parameter so it would launch it on all GPU's in a single process instead.  I'll probably play around with it some more eventually.

[Gilfoyle]

I just started using MultiPoolMiner V2.5.2 and "I think" I'm enjoying it's higher profits more than what I got with NiceHash, if only I could make sense of the reported estimated profits:


Miner                                           BTC     USD
-----                                           ---     ---
MultiPoolMiner                                  0.00265 7.02710
{CcminerSp-Skein, CpuminerJayddeeAesavx-Lyra2z} 0.00343 9.07601

Miner                                                   BTC     USD
-----                                                   ---     ---
MultiPoolMiner                                          0.00265 7.00380
{CcminerKlaust-NeoScrypt, CpuminerJayddeeAesavx-Lyra2z} 0.00326 8.59861


These are two typical results I get when running on my GTX 1070, with the copy of MPM that I installed when I had my 1070 plugged into the motherboard. The day before this I already had a separate installation of MPM that I installed with a GTX 970 plugged in and got this result:


MultiPoolMiner is 56% more profitable:

Miner                                                   BTC     USD
-----                                                   ---     ---
MultiPoolMiner                                          0.00301 7.60736
{CcminerKlaust-NeoScrypt, CpuminerJayddeeAesavx-Lyra2z} 0.00193 4.87610


I find that in this copy of MPM the top BTC value is always at or around 0.00301, and for the 1070 value it's 0.00265. To make things even weirder, if I run the 970-installed-MPM copy with my 1070 gpu and vice versa, these reported values don't actually change to reflect the power of the cards even when the ccminer.exe window does. The 1070 should be around 20-50% faster than the 970.

I found that manually adjusting the values of the files in the Stats folder will only affect the bottom line, so clearly that value is estimated by the initial benchmarks.

My questions:
Where does the MultiPoolMiner value come from?
Why is it lower than the {CcminerKlaust-NeoScrypt...} estimate?
How do I get an accurate estimate of my actual BTC/USD-equivalent income?

Also if I'm making as much money as I hope I am, great work!