[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[TigTex]

ETH is ok, but SC fee is way too much.
Where do you see those numbers anyway? How can one change the minimum payouts?

12SC is something like 15 cents (of dolar) so it's not that much at all.
You can see all this numbers if you login to the pool and go to each coins page. Then click "wallet" on that page. For example, see here for ethereum

[1715100850]

1715100850

[1715100850]

1715100850

[1715100850]

1715100850

[1715100850]

1715100850

[1715100850]

1715100850

[SimpleAone]

Are you mining with GPU not ASIC?

2 Gridseed 3355Mini miners.

Litecoin block is found rarely. Last block was found 5 days ago.
You'll get credits when block is found. I don't see any error from litecoin pool currently.

This is what i get atm, if this is normal then i am ok

2017-06-30 (UTC)    0.00513331
2017-07-01 (UTC)    0.00000000
2017-07-02 (UTC)    0.00000000
2017-07-03 (UTC)    0.00000000
2017-07-04 (UTC)    0.00000000
2017-07-05 (UTC)    0.00000000
2017-07-06 (UTC)    0.00000000

[z0n0]

@miningpoolhub
will you add ZenCash in future?

[TigTex]

@miningpoolhub

Right now you are under heavy work with the pool. Do you need help, and If you do, what kind of help would be good for you?

And also, just one question regarding ethash, on your page you say this:

Code:

Ethereum mining reward is combination of

(1) block finding reward. 5 ETH
(2) transaction fee (gas spent)
(3) uncle reward (4.375 ETH, 3.75 ETH, 3.125 ETH, 2.5 ETH, 1.875 ETH, 1.25 ETH)
(4) uncle inclusion incentive (0.3125 ETH, 0.15625 ETH)

We distribute all these 4 types of rewards.

Because this pool is using PPLNS system, does this means that if a single worker founds a block, it is distributed among the other pool miners using the PPLNS system or are the 5 ETH credited directly to the account that found the block (just like solo mining)?

[miningpoolhub]

Are you mining with GPU not ASIC?

2 Gridseed 3355Mini miners.

Litecoin block is found rarely. Last block was found 5 days ago.
You'll get credits when block is found. I don't see any error from litecoin pool currently.

This is what i get atm, if this is normal then i am ok

2017-06-30 (UTC)    0.00513331
2017-07-01 (UTC)    0.00000000
2017-07-02 (UTC)    0.00000000
2017-07-03 (UTC)    0.00000000
2017-07-04 (UTC)    0.00000000
2017-07-05 (UTC)    0.00000000
2017-07-06 (UTC)    0.00000000

Yeah it is normal. No blocks found for 6 days now.

@miningpoolhub
will you add ZenCash in future?

Yeah I'll add Zen. But I have to fix Graphs page first and optimize miner notification alaram feature.
Sorry for late.

@miningpoolhub

Right now you are under heavy work with the pool. Do you need help, and If you do, what kind of help would be good for you?

And also, just one question regarding ethash, on your page you say this:

Code:

Ethereum mining reward is combination of

(1) block finding reward. 5 ETH
(2) transaction fee (gas spent)
(3) uncle reward (4.375 ETH, 3.75 ETH, 3.125 ETH, 2.5 ETH, 1.875 ETH, 1.25 ETH)
(4) uncle inclusion incentive (0.3125 ETH, 0.15625 ETH)

We distribute all these 4 types of rewards.

Because this pool is using PPLNS system, does this means that if a single worker founds a block, it is distributed among the other pool miners using the PPLNS system or are the 5 ETH credited directly to the account that found the block (just like solo mining)?

Oh I'm finding someone to help pool maintenance these days.
I want to offer these things to only local dev/operator who can meet and talk in offline. I once tried with one from online, but it didn't end well.


You and all participating miners will get proportional to their commitments.
All rewards are distributed to all miners.
It's not like solo pool. There's no block finding bonus like thing.

[carlo_0000]

What are the minimum payouts for ETH and SC and what are the different transaction fees for those two?

delete the miner what make trouble in multipoolminer\Miners


i have my first nvidia ring with 5x 1060 3G  but so disappointed  i wish i had rx570's  


i had to remove gatelessgate miner
this one freeze and crash the computer


when doing xmr benchmark  got error

xmr-stak-nvidia

[2017-07-06 16:35:41] : JSON config parse error(offset 1): Missing a name for object member.
Press any key to exit.


speed on ether are hum how to say a joke ?   i m getting 2.5mh /gpu lol
how is this even possible ?  it s not dag problem  i tested on music coins  does 6mh


i notice also in multipoolminer

for cpu mining ,  amd cpu miner are missing for yescrypt
and for xmr stak   it benchmark with 6 or 8 threads  but the best results on amd cpu are with 7 threads
355h/s for fx 8300 with 7 threads (3.9ghz)

and also skein algo for nvidia is disable  need to add it in start.bat

[z0n0]

What are the minimum payouts for ETH and SC and what are the different transaction fees for those two?

delete the miner what make trouble in multipoolminer\Miners


i have my first nvidia ring with 5x 1060 3G  but so disappointed  i wish i had rx570's  


i had to remove gatelessgate miner
this one freeze and crash the computer


when doing xmr benchmark  got error

xmr-stak-nvidia

[2017-07-06 16:35:41] : JSON config parse error(offset 1): Missing a name for object member.
Press any key to exit.


speed on ether are hum how to say a joke ?   i m getting 2.5mh /gpu lol
how is this even possible ?  it s not dag problem  i tested on music coins  does 6mh


i notice also in multipoolminer

for cpu mining ,  amd cpu miner are missing for yescrypt
and for xmr stak   it benchmark with 6 or 8 threads  but the best results on amd cpu are with 7 threads
355h/s for fx 8300 with 7 threads

and also skein algo for nvidia is disable  need to add it in start.bat

You must update win 10 to the very last version of creators update - with that update you'll be able to run at ~19MH on ETH

[fonyo]

What are the minimum payouts for ETH and SC and what are the different transaction fees for those two?

speed on ether are hum how to say a joke ?   i m getting 2.5mh /gpu lol
how is this even possible ?  it s not dag problem  i tested on music coins  does 6mh

There is something wrong with your setup or mobo or else. I have the same issue with my third rig with the 1080 cards, 480 rig and 1070 rig are running just fine. It is a win10 issue but even a reinstall didn't help. On linux I get 22 MH/s for each which is still very low. But I still couldn't figure out what the problem was.

[carlo_0000]

What are the minimum payouts for ETH and SC and what are the different transaction fees for those two?

speed on ether are hum how to say a joke ?   i m getting 2.5mh /gpu lol
how is this even possible ?  it s not dag problem  i tested on music coins  does 6mh

There is something wrong with your setup or mobo or else. I have the same issue with my third rig with the 1080 cards, 480 rig and 1070 rig are running just fine. It is a win10 issue but even a reinstall didn't help. On linux I get 22 MH/s for each which is still very low. But I still couldn't figure out what the problem was.

oh   driver problem then ? maybe trying an older one ?
i did not make a fresh install, as i use same motherboard than my amd ring, i clone hard driver and  remove amd driver


[/quote]

You must update win 10 to the very last version of creators update - with that update you'll be able to run at ~19MH on ETH
[/quote]

hum ok i will checki updates, i disable windows update long time ago



edit: ok he was right it s a windows 10 problem , i update this night and restart the bench
it does 19mh on eth

[Steven3iii]

I am getting the "únable to login" message when I use miningpoolhub...I have not had problems mining before, but now I cannot access my account.

[sky62]

I am getting the "únable to login" message when I use miningpoolhub...I have not had problems mining before, but now I cannot access my account.

Same problem but only with mobile connection

[miningpoolhub]

I am getting the "únable to login" message when I use miningpoolhub...I have not had problems mining before, but now I cannot access my account.

Same problem but only with mobile connection

Can you tell me the mobile browser info?
What OS? What version?

I heard that chrome app works well.
I also tested on Samsung Galaxy default browser which works well.

[Steven3iii]

I am getting the "únable to login" message when I use miningpoolhub...I have not had problems mining before, but now I cannot access my account.

Same problem but only with mobile connection

Can you tell me the mobile browser info?
What OS? What version?

I heard that chrome app works well.
I also tested on Samsung Galaxy default browser which works well.

My OS is Windows 10 ...Browser is MS edge...

[d4amenace]

I'm wondering if someone can help me get my multipool miner up and running.  I installed it just fine, except for the fact that when I first tried to start it, it requested I change permissions. I didn't know what that was so I said "N" for no.  When I tried to run it the second time all I get is unauthorized access messages non-stop.  It now only as for my username and I don't get the options to change permissions.  Can someone tell me if that is the problem or is it something else?

(see image below)

http://i64.tinypic.com/26249xh.png

[Jaerin]

I'm wondering if someone can help me get my multipool miner up and running.  I installed it just fine, except for the fact that when I first tried to start it, it requested I change permissions. I didn't know what that was so I said "N" for no.  When I tried to run it the second time all I get is unauthorized access messages non-stop.  It now only as for my username and I don't get the options to change permissions.  Can someone tell me if that is the problem or is it something else?

(see image below)

http://i64.tinypic.com/26249xh.png

If you delete and reextract it should ask you to do it again.   Basically it is saying that it doesn't have write permissions to the stats directory in the folder where multipoolminer is located.  If you look up how to change windows permissions you can likely fix it.  Otherwise make sure the multipoolminer is not located in your program files directory.  Put it somewhere under the root of your C drive.   Program Files requires special permissions for writes usually.  Also if it seems like your computer hangs when it is benchmarking it is likely the FireIceNvidia which seems to consume way too many resources when running.  Its never profitable compared to the others so you could just remove it from the miners folder.

[alucard20724]

Can you add Decred coin to your pool since it's available on all three exchanges that you support.

https://coinmarketcap.com/currencies/decred/#markets

I'm trying to get more dual mining capabilities with claymore's dual miner with your pool.

thanks.

[Steven3iii]

I am getting the "únable to login" message when I use miningpoolhub...I have not had problems mining before, but now I cannot access my account.

Same problem but only with mobile connection

Can you tell me the mobile browser info?
What OS? What version?

I heard that chrome app works well.
I also tested on Samsung Galaxy default browser which works well.

My OS is Windows 10 ...Browser is MS edge...

So what does "Unable to login" mean? I have changed my password and sent you pms but no response...

[L44g0]

First of all a big thank you to miningpoolhub and fellow miners!

im fairly new to mining, got introduced by a friend a couple of weeks ago, and after lots of reading forum posts, studying, trading and researching, ive even gotten my first rig 7x1070 and a 1080ti for playing around with.

for me its a new fun hobby and im trying to do something to it each day, either tweaking with mining programs, or finding that right oc for each card. its ton of fun and learning something new everyday.

Ive only ever been to miningpoolhub since i started and i find no reason to change network.

I know you are busy tweaking the db, but i would also like to sign for the earlier requests of adding the " Nvidia " coins to the hub.

Zencash (Zen), Hush (Hush), LBRY (LBC) and Diamond (DMD)

Once again, thank you all and happy mining!

/L44g0

Edit: Can also suggest that Sibcoin (SIB) is frequent toplist on whattomine.com to mine on the nvidia coins.

[metalmusiccoin]

Hey Mining Pool Hub Team, just wondering if you guys can add a pool for metal music coin, we are looking for a new pool.

QT wallet and source are here

WINDOWS: http://metalmusiccoin.pw/MTLMC-V3.1.zip

SOURCE V3: https://github.com/metalmusiccoin/MTLMCV3


We are in this exchange

EXCHANGE:


CRYPTOPIA NZ
YOBIT
CRYPTO TRADE
NOVA EXCHANGE

[SickTricky]

Hi, can you program into your algorithm for auto-switching to take into account ethereums difficulty/dag as it mines slower on ethereum than on other ethash coins?
Then auto-switching will be even more profitable.