[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[wolverine5pl]

what happened to x13, x15 etc algos? I only see x11 now

[z0n0]

@mph

1 - Any chance you can add UBQ, have you looked into it?
2 - Are you concidering of lowering some tx fees in some coins, I noticed there a few a bit high.

[Call_Me_Bambi]

Some of Monero, Electroneum, Zcoin pool servers were not working due to massive botnet miners. Please set fail-over server from miner rigs.

Looks like mining Monero, Electroneum and Zcoin on MPH is now over for us small time miners, it's a pity.

[Mrocha85]

Need some assistance with resetting password to login in MPH.  Did the link but have yet to receive an email and also sent a request into support.

[coinbala]

Hi

I just built my first 2 rigs, 12x RX570 + 1 Fury on my main PC

I think I want to mine ZCASH and currently running test on the fury Rig using Genoil miner

Could someone explain me how can I make sense of the speeds I am seeing?

On Genoil I see between 35 to 45 S/s

On the dashboard I see 27 H/s

Using Whattomine it says I should have 455 h/s for Equihash and 1 fury

Which measurement is right and which one is correct to calculate profit?

[TiDragon]

  Could you please add USDT for auto exchanges. Thank you. 

[cryptoyes]

I've been dumping 102 KSol/s on MPH on the equihash server auto-switch (port 17023) but the UI never reports more than 85 Ksol/s, even after minign a single coin for 1h ... I've been mining for more than 12h now. At some point today it mined only zcl for over 1h straight. Still only 85 Ksol/s reported.

Is this a bug? Can anyone comment?

I can confirm that mining on a different pool (e.g. miningspeed.com) it does report the full 100+ KSol/s.

[DrX]

Hi

I just built my first 2 rigs, 12x RX570 + 1 Fury on my main PC

I think I want to mine ZCASH and currently running test on the fury Rig using Genoil miner

Could someone explain me how can I make sense of the speeds I am seeing?

On Genoil I see between 35 to 45 S/s

On the dashboard I see 27 H/s

Using Whattomine it says I should have 455 h/s for Equihash and 1 fury

Which measurement is right and which one is correct to calculate profit?

Use Claymore miner

[coinbala]

Hi

I just built my first 2 rigs, 12x RX570 + 1 Fury on my main PC

I think I want to mine ZCASH and currently running test on the fury Rig using Genoil miner

Could someone explain me how can I make sense of the speeds I am seeing?

On Genoil I see between 35 to 45 S/s

On the dashboard I see 27 H/s

Using Whattomine it says I should have 455 h/s for Equihash and 1 fury

Which measurement is right and which one is correct to calculate profit?

Use Claymore miner

Thanks - I figured I had to use Claymore AND install older drivers 16.3.2 that work with FURY
It worked - now hashing at 700 H/s



No I see contributed credits 0.00082323

But if I look at my balance I see 0.00063944

Is that for fees? Is it normal?


EDIT: I see I have 0.00018 unconfirmed so thats probably why? I guess it will be updated in payout

[Maxikosw]

I would like to know what happens bitcoin payout that did not arrive to my wallet. That could be because too low fee or something. But o would like to know is it gone forever or do you pay it later ?.. And its stupid that no tx on payout list on that payout. I have waited for a week...

[Lordas]

I would like to know what happens bitcoin payout that did not arrive to my wallet. That could be because too low fee or something. But o would like to know is it gone forever or do you pay it later ?.. And its stupid that no tx on payout list on that payout. I have waited for a week...

You can look at the transactions and copy txid to block explorer. There will be all info.

[fangs87]

The thing about running algo switchers is you need to tune down your cards

Just because it runs stable on one algo OC'd to this or that amount doesn't mean it will be stable on all of them.

This seems to be especially a problem if a GPU is driving the display. Nvidia drivers really don't like the algo switching in those scenarios.

My mining rig handles the algo switching much better. .. . Presumably because I don't have any of hte cards driving displays.

I don't even bother with algo switching on the personal rig. Too much of a pain.

Is the answer still to just not have any displays connected, are there other alternatives or fixes?

[Maxikosw]

I would like to know what happens bitcoin payout that did not arrive to my wallet. That could be because too low fee or something. But o would like to know is it gone forever or do you pay it later ?.. And its stupid that no tx on payout list on that payout. I have waited for a week...

You can look at the transactions and copy txid to block explorer. There will be all info.

The problem is that i cannot see that transactions on blockexplorer and i dont have txid. I have payout on miningpoolhub without txid. https://snag.gy/HUg9tQ.jpg

[Call_Me_Bambi]

The thing about running algo switchers is you need to tune down your cards

Just because it runs stable on one algo OC'd to this or that amount doesn't mean it will be stable on all of them.

This seems to be especially a problem if a GPU is driving the display. Nvidia drivers really don't like the algo switching in those scenarios.

My mining rig handles the algo switching much better. .. . Presumably because I don't have any of hte cards driving displays.

I don't even bother with algo switching on the personal rig. Too much of a pain.

Is the answer still to just not have any displays connected, are there other alternatives or fixes?

Having a display connected or not connected will not make any difference. What will make a difference is GPU BIOS Flashing, Video Drivers & Miners (and how the miner is configured). And as said above, different algols with behave differently, you will have to test each one you want to mine to get the best out of them.

[fangs87]

Having a display connected or not connected will not make any difference. What will make a difference is GPU BIOS Flashing, Video Drivers & Miners (and how the miner is configured). And as said above, different algols with behave differently, you will have to test each one you want to mine to get the best out of them.

what do you mean by gpu bios flashing ? and all the miners work on the video card individually just not swapping between them, swapping caused the blocked from access.

Thought I'd try without monitors just incase, it wouldnt hurt anything so why not, well without the 2 in my case. so both are unplugged & I'm just remote accessing into the box, but so far so good. need more time to tell but so far it's not been blocked, it switched through everything on the benchmark, then went back to the most profitable one and has been chugging along.

ok answered my own question on the how to for the bios, but lead to another question of how to pick which one. I see what I currently have, but how do you know if another is better?

[z0n0]

MPH, you should lower some tx fees, especially SIA coin - you have now 12 SIA tx fee, even bittrex has way lower, just 0.1 on bittrex!

[drwx101]

So I have a bunch of zencash on the exchange waiting on auto-exchange for over a day now.
Is this normal at miningpoolhub that funds are stuck and locked up like this for days?

[CryptoWaffle]

So I have a bunch of zencash on the exchange waiting on auto-exchange for over a day now.
Is this normal at miningpoolhub that funds are stuck and locked up like this for days?

you tried ahashpool ?

[malcrypto1]

Glad to hear everything is ok, I was wondering what was happening.
I really didn't want to loose anther auto exchange pool as the ranks are thinning out as time goes by.

Thanks for the free week!

You're welcome!
I will monitor pool more often and do my best.

hi , i just received my baikal but theres no x13 or x15 as an option. im thick and need advice, the kind im not getting of baikal right about now... please help

[malcrypto1]

what happened to x13, x15 etc algos? I only see x11 now

hi im having the same problem, also i have no idea where or what im now mining on  this mininghub. i cant find any contact details . do you have any idea where i can get help or should i just ditch this mininghub and go with nicehash? appreciate any help