[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[SiegeHorse]

Well i have spent the best part of  3 weeks getting up to speed with all this mining stuff. And i must say whether i'm getting the correct payout daily i am not sure but then where  or on which pool can one be really sure you not being ripped off.What i can say is i first looked at Multi-pool miner of aaronsace and thought Fekk this it too difficult. Well after watching a video of razorseal i think it all became clear to me and frankly i think MPH works very well in conjunction with aaronsace's program. Im getting ave $10+ everyday with 2x RX570 GPUs and it seems good enough to me. If there is a better option id surely like to know where and to try it out.

Skimming profits i think is an impossible calc to make as mining speeds and algos change every few minutes so unlees you can mine your own block forever and a day  i doubt if we will ever know the truth .......im getting 4 more cards in the next weeks and if i can make $30+  a day i thin ill be happy.  Just my 2 cents......comments welcome

JUPIE2008

If you are looking for a simple mining solution, I made a really easy to use miner for MPH that you could try: https://bitcointalk.org/index.php?topic=2623352. Just install, run benchmark, and profit Has some benefits over MPM that it does per card benchmarks and controls, and if you are using it on your main rig that you can set it to 'idle mining' so that it stops mining when you are using computer and doesn't affect your gaming or youtube.

[1714828837]

1714828837

[1714828837]

1714828837

[1714828837]

1714828837

[zardozer]

9) there are sites/tools to help make things easier with this pool

Which sites / tools are you guys using for MPH?
I know mph stats... anything else?

Thanks

[ssmokeyy]

If I make 1500 USD per month in btc payout will I make the same amount in ethereum payout also on miningpoolhub if I switch to ethereum from btc?

[sambonator]

How can I figure out which algorithm has been chosen through the API?
I'm trying to optimize my rigs and knowing when multi-algo switching has occurred and to which algo would be helpful.  I've looked through all the info available from the APIs but I cannot find how one can determine which algo was chosen from , e.g., when I am using the "NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Lyra2z, Myriad-Groestl, NeoScrypt, Skein" autoswitch, it can take a minute or more to switch from one algo to anther, since it has to go through all the miners/algo's until one "sticks" to the algo port and login. 
Rather than this trial and error method, can you give us an API where we can get info so we can switch straight to the correct algo?
Thank you!
S.

[Martimus]

Does your https://miningpoolhubstats.com work? Mine keeps saying: Whoops, looks like something went wrong.

[Rhyn0]

Does your https://miningpoolhubstats.com work? Mine keeps saying: Whoops, looks like something went wrong.

works for me.

[stfN2128]

are there any problems known for autoexchange? set it to verge and no exchange since 2 or 3 days, coins stuck  "on exchange"

[Zikkson]

I have autoexchange set to LTC and it works well. But maxcoin is stuck in autoexchnage walle (maybe because i have only 0,01usd in it).

[drwx101]

ZCL appeared at exchange (my was set to auto).

Good to hear.
I don't know any legit pool that locks up and withholds their customers funds eligible for payout indefinitly for days or weeks and if my funds remain inaccesible and supposedly "stuck sitting on some exchange for days already just depreciating" for much longer I am inclined to believe MHP is just running some fractional scheme with their internal customer wallets.
The complete lack of communication from the admin stinks too with the money they rake in every day you would expect a higher quality service to come with it.

Holy crap, the entitlement is real. If you don't like the way the pool operates, go somewhere else. It really can't get any simpler than that.

If you've got a problem bigger than "My $5 worth of some useless coin hasn't auto exchanged in the last five hours" send the OP a PM with details he will need to solve the problem (txn ids, etc). In my experience, we will get back to you with a resolution. Just not within 10 minutes. This pool isn't for everyone. If you need hand holding, don't understand how this pool works, or have little patience, I would recommend you go to a different pool.

Thats a lot of bullshit you spout there buddy I am not talking about 5 hours or 10 minutes maybe you have a big problem reading and are entitled yourself.
I am just inquiring about customer funds that are eligible for payout being withheld for days and not 10 minutes or 5 hours as you misleadingly try to claim here and whether that is your normal modus operandi towards your customers to withhold your customer funds indefintly, but seeing your dishonest reply it seems it is.

You put a lot of words together there but I don't think you know what all of them mean. Regardless, the pool sends me the requested coin in the correct amounts based on my specified minimum payouts which works out to be daily. It's pretty basic and works well for me at this point in time. Again, see my statement about the pool not being for everyone.

So, because it works for you, everyone else can go f..k themselves, right?

No, just you and the other clown. As I said before, if you have an issue, post/PM/email the Pool Op the problematic transaction ids and what the issue is. If he never gets back to you, move to a different pool. Whining in a forum with vague statements and accusations doesn't help get your problem resolved.

lmao you are the clown here spouting bullshit making excuses for something that obviously doesn't work properly. Already am at other pools don't worry about me kid.

[NoOneLt]

Hey guys, what latency do you have on europe.equihash-hub.miningpoolhub.com?

I need some help troubleshooting, i have ~400 ms ping wit 128 block size, and DSTM shows  400-600, pretty high i'd say, i am in EU and have pretty descent connection, and eu1.ethermine.org pings 30-40 ms.

UPD. Stable now 32-40

[sir_blacks]

Hello

@miningpoolhub can pls in name of all Gods to fix EU server!!!!        what end to be in Japan & Singapore = mining with 300-400 mls is not good & last EU server it sems is stop working aka that one from Germany just died, kaput !!!

Atm for eu ppls is better to mine on US server coz at list it bring ~150 mls so FIX EU server is past around 1 week from when this happen

thx

[cryptoyes]

For the EU server, use the IP (don't use the fqdn!): 139.162.138.168 ... you're welcome, I don't want any bitcoins

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

[sir_blacks]

For the EU server, use the IP (don't use the fqdn!): 139.162.138.168 ... you're welcome, I don't want any bitcoins

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

dear one 139.162.138.168 is server what was or is on Germany & what i say it just died or stop working it was not respond at any trace, ping from me or any other site what it can back trace ip ...

now i check agen & it semns it get try be alive high ping replay but at list it not say time out or not been found ...

same whats point have dns like "europe.equihash-hub.miningpoolhub.com" what behind there are 5 server 2 in Japan, 2 in Singapore & 1 on Germany ... my geography, geolocation it fail getting in a infinite loop error or my be europe was moved to Japan & i was not know :p

[crushed]

9) there are sites/tools to help make things easier with this pool

Which sites / tools are you guys using for MPH?
I know mph stats... anything else?

Thanks

A few are:

Awesome Miner
Nemos Miner
MultiPool Miner
mph_switch

You need to figure out if they work for your scenario or not and if you want to invest the time and, in some cases, money.

[Nooblife]

Good morning.

I would appreciate some assistance with my difficulty setting.  I am running two Bitmain Antminer L3+ and am interested in mining Verge (XVG).

I am using my name and worker properly. They do show up as active.  I am using the following setup:

Myl3.111
Myl3.222  (not real info)

stratum+tcp://hub.miningpoolhub.com:17001

I am not mining anywhere close to estimates from WhatToMine.  I know this is an estimator but still it is substantially lower by 25-40%.

Miner 1:  Diff 272k    Accepted 26     Rejected 00    Discarded 276
Miner 2:  Diff 238k    Accepted 59     Rejected 00    Discarded 752

TMP Dashboard estimates:   966 MH/s

TMP POOL stats:
966 MH/s   416 XVG estimates

So...what is wrong here?  Did I use the wrong stratum?  This is ASIC?  How do I setup the difficulty to improve outputs? 

Thank you in advance
Nooblife.

[alanon09]

Again a nightmare with a European server equhash? Ping to the server became 54ms as it was before, but in the mainer again 300ms. Using 139.162.138.168 now does not work though the connection goes to this address, admin please help us!

[CryptoWaffle]

9) there are sites/tools to help make things easier with this pool

Which sites / tools are you guys using for MPH?
I know mph stats... anything else?

Thanks

A few are:

Awesome Miner
Nemos Miner
MultiPool Miner
mph_switch

You need to figure out if they work for your scenario or not and if you want to invest the time and, in some cases, money.

any of those where I can select my own coins for a specific algo ?

TYIA

[cryptoyes]

For the EU server, use the IP (don't use the fqdn!): 139.162.138.168 ... you're welcome, I don't want any bitcoins

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

dear one 139.162.138.168 is server what was or is on Germany & what i say it just died or stop working it was not respond at any trace, ping from me or any other site what it can back trace ip ...

now i check agen & it semns it get try be alive high ping replay but at list it not say time out or not been found ...

same whats point have dns like "europe.equihash-hub.miningpoolhub.com" what behind there are 5 server 2 in Japan, 2 in Singapore & 1 on Germany ... my geography, geolocation it fail getting in a infinite loop error or my be europe was moved to Japan & i was not know :p

I have no idea what you're on about ...

Code:

# ping 139.162.138.168
PING 139.162.138.168 (139.162.138.168) 56(84) bytes of data.
64 bytes from 139.162.138.168: icmp_seq=1 ttl=48 time=22.0 ms
64 bytes from 139.162.138.168: icmp_seq=2 ttl=48 time=21.9 ms
^C
--- 139.162.138.168 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 21.962/22.007/22.052/0.045 ms

That's from within Europe. I'm mining on it (port 17023)

EDIT: No, I'm not. Connections are now refused. Damn ... this pool is plagued with problems.

Code:

# telnet 139.162.138.168 17023
Trying 139.162.138.168...
telnet: Unable to connect to remote host: Connection refused

[crushed]

I have no idea what you're on about ...

Code:

# ping 139.162.138.168
PING 139.162.138.168 (139.162.138.168) 56(84) bytes of data.
64 bytes from 139.162.138.168: icmp_seq=1 ttl=48 time=22.0 ms
64 bytes from 139.162.138.168: icmp_seq=2 ttl=48 time=21.9 ms
^C
--- 139.162.138.168 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 21.962/22.007/22.052/0.045 ms

That's from within Europe. I'm mining on it (port 17023)

EDIT: No, I'm not. Connections are now refused. Damn ... this pool is plagued with problems.

Code:

# telnet 139.162.138.168 17023
Trying 139.162.138.168...
telnet: Unable to connect to remote host: Connection refused

There are rolling restarts of mining servers to deal patch for the Meltdown vulnerability. From the main page:

- Some mining servers will be restarted one by one to patch Intel meltdown vulnerability. Mining rigs can be disconnected intermittently but will recover soon.

Might just want to redirect miners until the patching is completed.

[zcrypts]

These are IPS of the mining pool servers, check ping for each and choose one that works best for you


europe.equihash-hub.miningpoolhub.com         139.162.138.168
europe.equihash-hub.miningpoolhub.com         172.104.180.119
europe.equihash-hub.miningpoolhub.com           172.104.106.153
europe.equihash-hub.miningpoolhub.com           172.104.127.76
europe.equihash-hub.miningpoolhub.com         139.162.73.35
europe.equihash-hub.miningpoolhub.com         172.104.189.59


That being said, you should probably use fqdn as it will return the fastest server for your area, if I'm not mistaken.