[ANN] YACMiner - AMD GPU miner for Scrypt-Chacha, N-Scrypt, and Scrypt coins

[Thirtybird]

This is an updated version of cgminer 3.3.1 that supports mining any Scrypt, Adaptive-N-Scrypt, or Scrypt-chacha (aka "scrypt-jane") hashing algorithm.  This release includes the latest OpenCL scrypt-chacha kernel by mikaelh (v7) and a number of improvements from the version of CGMiner it was forked from (3.3.1)

Latest Version: 3.5.0 - Updated 3/13/2014

Source
https://github.com/Thirtybird/YACMiner
Windows Binaries
https://github.com/Thirtybird/YACMiner/releases

Changes:

• Display updated and fixed to account for vardiff
• ADL code has been updated and some fixes for various cards have been included
• Added fine-tuning parameters for mining high N-factor coins (Raw Intensity, Buffer-size) (starting with 3.4.0)
• Ability to mine other SC coins, and save the settings per-pool (starting with 3.4.2)
• Ability to mine Scrypt and N-Scrypt coins (starting with 3.5.0)

Usage:
sample settings for a R7 250 (384 shaders) 2GB card (with N = 14 / 32,768) being able to allocate 1,648 MB of GPU memory: 2.5 KH/sec with overclocking

Code:

yacminer --scrypt-chacha --worksize 256 -g 1 --lookup-gap 4 -R 3072 --thread-concurrency 52736 -o stratum+tcp://yac.coinmine.pl:9088 -u username -p password

Good sample settings for a 7850 (1024 shaders) 1GB card (with N = 14 / 32,768) being able to allocate 760 MB of GPU memory: 1.45 KH/sec with overclocking

Code:

yacminer --scrypt-chacha --worksize 256 --lookup-gap 8 -g 1 -R 1856 --thread-concurrency 48640 -o stratum+tcp://yac.coinmine.pl:9088 -u username -p password

At higher NFactors, cards with high shader counts should be set to use a higher lookup gap in order to keep them busy as they may be short on memory.  If you've got a 1GB card, and are mining YACoin, your lookup-gap will likely be 8.  2GB cards will probably be ranging from 4 through 8 depending on how many shaders your card has.

Parameters work similarly as in normal scrypt mining except that much more memory is needed depending on the N parameter currently used by the network. Try to find the highest value for thread concurrency you can achieve before the thread memory gets shifted from dedicated memory to synamic memory (use GPUz or HWInfo to monitor this). Set worksize (-w) to 32, 64, 128 or 256 - the RawIntensity for most cards needs to be a multiple of this value, and you can do a bit more fine tuning with a lower work size.  This may be different for the R7 & R9 cards, however, these may allow their Raw Intensity to be adjusted in multiples of 8 instead of a multiple of work size.

Your starting point for setting the Raw Intensity will be based on the amount of memory the card has.  Increase Raw Intensity until you start seeing HW errors then back it down until you aren't receiving any.  The following table is merely a guideline on where to start.

Code:

Memory	# of shaders	LG	Raw Intensity
1GB	Low Shaders	4	Shaders*4
2GB	Low Shaders	2	Shaders*2
2GB	Low Shaders	4	Shaders*4
1GB	High Shaders	8	Shaders*1
2GB	High Shaders	4	Shaders*2

Future Plans - see https://github.com/Thirtybird/YACMiner/wiki/Plan

• Ability to save configurations per card per hashing algorithm (to easily allow failover pools that are a different coin/NFActor)
• Easy-mode configuration - specify just the buffer-size and let YACMiner figure out the other settings

Attribution:
Original version by mikaelh
http://yacointalk.com/forum/index.php/topic,350.0.html
Original version by hanzac
https://bitcointalk.org/index.php?topic=232241.0

[1714191222]

1714191222

[1714191222]

1714191222

[1714191222]

1714191222

[1714191222]

1714191222

[alenevaa]

Do you have any guide to make executables for Linux? I'm very newbie in Linux unfortunately.

[lumberinvestments]

Keep up the good work m8. You deserve many donations. People don't yet realize what little bit of wonder you are doing with this piece of software.
I hope many can donate so you'll buy more cards for yourself.

[ekrem]

Hi what it means -R  how to write 7970

[Thirtybird]

Hi what it means -R  how to write 7970

https://github.com/Thirtybird/YACMiner/blob/master/SCRYPT-README

[RJX]

Hi

I'm trying to configure yacminer batchfile to mine Bitleu and i'm having trouble writing it. I have this:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

C:\Users\q6600\Desktop\BITLEU\YAC/yacminer.exe --scrypt -o 127.0.0.1:22640 -u user -p pass --intensity 16 --gpu-engine 870 --gpu-memclock 1145 --worksize 256 --thread-concurrency 5824 --failover-only --queue=0 --scan-time=0 --expiry=1 -g 1

pause

I get HW=going up with every new block detected by network.

any tips for me?

thanks

[Thirtybird]

Hi

I'm trying to configure yacminer batchfile to mine Bitleu and i'm having trouble writing it. I have this:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

C:\Users\q6600\Desktop\BITLEU\YAC/yacminer.exe --scrypt -o 127.0.0.1:22640 -u user -p pass --intensity 16 --gpu-engine 870 --gpu-memclock 1145 --worksize 256 --thread-concurrency 5824 --failover-only --queue=0 --scan-time=0 --expiry=1 -g 1

pause

I get HW=going up with every new block detected by network.

any tips for me?

thanks

yep, you need --nfmin and --nfmax and --startime on your command line

[Thirtybird]

YACMiner has been updated to 3.5.0 today!

Version 3.5.0-yac2 - 13th March 2014
*** MAJOR CHANGES AHEAD ***
- Application can now mine scrypt, N-Scrypt, and scrypt-chacha based coins
- The command-line options for setting the algorithm have changed!
   --scrypt - Mine scrypt based coins
   --scrypt-chacha (this is the equivilant of what --scrypt used to do!)
   --nscrypt - Mine N-Scrypt based coins (vertcoin)
- Scrypt and N-Scrypt have different kernels.  You can use the N-Scrypt
 kernel for mining Scrypt if you like by passing "--kernel nscrypt" on
 the command line.  The converse does not work though.
- buffer-size is now fully completed, and thread concurrency is no longer
 needed.  thread-concurrency is still a valid option if you want to use it.
- Implemented new defaults if you do not provide a buffer-size or
 thread-concurrency.  It will attempt to allocate 88% of the GPU memory.
- lookup-gap now defaults to 4 if it is not set.
- W/U is back on the hashmeter at the top of the curses display
- Rejected count is now the number of rejected shares instead of the value
 of the sum of all the rejected shares
- Fixed OpenCL 1.2+ patch regarding BFI_INT patch still being done.
- cleanup code and extraneous files in project.
- More updates to the readme.md and scrypt-readme for further documentation.

[ivanlabrie]

YACMiner has been updated to 3.5.0 today!

Version 3.5.0-yac2 - 13th March 2014
*** MAJOR CHANGES AHEAD ***
- Application can now mine scrypt, N-Scrypt, and scrypt-chacha based coins
- The command-line options for setting the algorithm have changed!
   --scrypt - Mine scrypt based coins
   --scrypt-chacha (this is the equivilant of what --scrypt used to do!)
   --nscrypt - Mine N-Scrypt based coins (vertcoin)
- Scrypt and N-Scrypt have different kernels.  You can use the N-Scrypt
 kernel for mining Scrypt if you like by passing "--kernel nscrypt" on
 the command line.  The converse does not work though.
- buffer-size is now fully completed, and thread concurrency is no longer
 needed.  thread-concurrency is still a valid option if you want to use it.
- Implemented new defaults if you do not provide a buffer-size or
 thread-concurrency.  It will attempt to allocate 88% of the GPU memory.
- lookup-gap now defaults to 4 if it is not set.
- W/U is back on the hashmeter at the top of the curses display
- Rejected count is now the number of rejected shares instead of the value
 of the sum of all the rejected shares
- Fixed OpenCL 1.2+ patch regarding BFI_INT patch still being done.
- cleanup code and extraneous files in project.
- More updates to the readme.md and scrypt-readme for further documentation.

Amazing news! Seems like the ideal miner for my dedicated mining Os.

[fran2k]

• Ability to mine Scrypt and N-Scrypt coins (starting with 3.5.0)

Wow, very nice! Thanks, I´m going to try it right now.

[fran2k]

Thirtybird, could you give some working running command for 79xx and/or R9 GPUs for both scryptN and scrypt. I´m not being successful to mining VTC with your miner.

Thanks.

[Thirtybird]

Thirtybird, could you give some working running command for 79xx and/or R9 GPUs for both scryptN and scrypt. I´m not being successful to mining VTC with your miner.

Thanks.

You need to say how much memory the card has... post YOUR command line and I'll explain the differences that need to be made.

[Hilux74]

Fantastic update!

Using this mining microCoin and have been able to increase my system happy hashrate (ie no crashing) on each R9-270 card from 75 to 92 khash/s.  That is a big increase. 

[ivanlabrie]

Fantastic update!

Using this mining microCoin and have been able to increase my system happy hashrate (ie no crashing) on each R9-270 card from 75 to 92 khash/s.  That is a big increase. 

Mrc is at N factor 11, right?

Mind sharing your settings?

[smart15]

I can't get right settings for 7950, what settings should i use?

[Hilux74]

Here are the relevant settings I am using for my MSI R9-270 2GB to obtain 90-93khash/s on microCoin.  Hope it is useful.

--gpu-engine 1100,1100 --gpu-memclock 1200,1200 --rawintensity 5120 --buffer-size 1400 -g 1 -w 256 --lookup-gap 2

One of my systems with 3 cards has since my post bluescreened so I might need to tweak it more to run stable.

[smart15]

Here are the relevant settings I am using for my MSI R9-270 2GB to obtain 90-93khash/s on microCoin.  Hope it is useful.

--gpu-engine 1100,1100 --gpu-memclock 1200,1200 --rawintensity 5120 --buffer-size 1400 -g 1 -w 256 --lookup-gap 2

One of my systems with 3 cards has since my post bluescreened so I might need to tweak it more to run stable.

thanks for help, but that didn't work for me on yac

[ivanlabrie]

Here are the relevant settings I am using for my MSI R9-270 2GB to obtain 90-93khash/s on microCoin.  Hope it is useful.

--gpu-engine 1100,1100 --gpu-memclock 1200,1200 --rawintensity 5120 --buffer-size 1400 -g 1 -w 256 --lookup-gap 2

One of my systems with 3 cards has since my post bluescreened so I might need to tweak it more to run stable.

thanks for help, but that didn't work for me on yac

It's for MRC/UTC, N 11.

Will try asap.

[Thirtybird]

I can't get right settings for 7950, what settings should i use?

You need to say how much memory the card has... post YOUR command line and I'll explain the differences that need to be made.

[smart15]

I can't get right settings for 7950, what settings should i use?

You need to say how much memory the card has... post YOUR command line and I'll explain the differences that need to be made.

I tried the command line you posted above for R7 250. my card has 3GB memory