efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 23, 2018, 02:16:47 PM |
|
Hi,
I used this software and my 3rd chain is missing?
I tried loading up default firmware and the chain is still missing?
Thanks
Hi. Then the problem is not the firmware. That said, turn off miner. Reseat all power connectors and the data cables between the control board and the hash board. See if problem persists. If so, swap control and power cables between boards 2 and 3 to isolate whether it is the board or the cable or power. A simple set of logical steps will let you isolate the hardware component. Jason
|
|
|
|
chipless
Jr. Member
Offline
Activity: 559
Merit: 4
|
|
November 24, 2018, 08:38:17 PM |
|
Hi,
I used this software and my 3rd chain is missing?
I tried loading up default firmware and the chain is still missing?
Thanks
Hi. Then the problem is not the firmware. That said, turn off miner. Reseat all power connectors and the data cables between the control board and the hash board. See if problem persists. If so, swap control and power cables between boards 2 and 3 to isolate whether it is the board or the cable or power. A simple set of logical steps will let you isolate the hardware component. Jason I have noticed many of the cables aren't snap-locked all the way in the socket
|
Share your results with others on my Discord channel https://discord.gg/6t62apJ
|
|
|
doZerilla
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 25, 2018, 12:42:44 AM |
|
Cheers
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 25, 2018, 01:56:46 AM |
|
Cheers Fixed?
|
|
|
|
doZerilla
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 25, 2018, 07:02:03 AM |
|
Cheers Fixed? Yes, thanks for that! I have them remotely hosted so had to arrange for the cables to be checked. Cheers.
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 26, 2018, 03:16:33 AM |
|
Image will be released for Z9 paid, and mini users tomorrow evening, 11/26/2018. I've received feedback from the beta testers and will be incorporating the necessary fixes.
The delay this time is simply it was Thanksgiving and family took priority. :-)
thank you,
jason
|
|
|
|
tahoeminer
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 26, 2018, 05:17:42 AM |
|
Hi Jason, I was wondering if you are going to e-mail the paid Z9 users a file to upload to the latest image you are providing, so we don't have to use the dev fee? I hope you had a great time with the family for Thanksgiving too! Thanks
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 26, 2018, 05:37:14 AM |
|
Hi Jason, I was wondering if you are going to e-mail the paid Z9 users a file to upload to the latest image you are providing, so we don't have to use the dev fee? I hope you had a great time with the family for Thanksgiving too! Thanks
@tahoe - since I don't have everyone's email, no. But, your original link will currently work to provide you "half" of the instructions. Your link will currently provide you your license and instruction -- I just need to finish the image. I tried to keep track of who contacted me how, but it became a little complicated. I will release an image tomorrow night (well, late tonight now since it is 12:36AM at this point) for paid users at least. I'm confident in that infrastructure and the image now, save for one bug that won't take me long to fix. Jason
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 26, 2018, 06:59:46 AM |
|
As an aside, I have 2x $55 and 2x $90 bitmain coupons available that are good through the 30th. first come first serve for free *IF* you are going to use them.
thank you,
jason
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 26, 2018, 11:32:58 PM |
|
Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.
At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.
Thank you,
Jason
|
|
|
|
MoNTE48
Newbie
Offline
Activity: 29
Merit: 0
|
|
November 27, 2018, 12:01:03 AM |
|
Hi, please, fix link for z9-mini firmware in first message. =)
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 27, 2018, 12:01:49 AM |
|
Hi, please, fix link for z9-mini firmware in first message. =)
Ah.. sorry, thank you for catching that. It is fixed. Jason
|
|
|
|
KrK27
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 27, 2018, 02:02:22 AM |
|
Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.
At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.
Thank you,
Jason
Is possible use with hive os? What parameters set for each board freq in hive os?
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 27, 2018, 02:03:50 AM |
|
Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.
At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.
Thank you,
Jason
Is possible use with hive os? What parameters set for each board freq in hive os? I cannot speak to HiveOS other than I think it will work with it, however HiveOS would have to add support for board frequencies. Jason
|
|
|
|
KrK27
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 27, 2018, 02:10:32 AM |
|
Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.
At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.
Thank you,
Jason
Is possible use with hive os? What parameters set for each board freq in hive os? I cannot speak to HiveOS other than I think it will work with it, however HiveOS would have to add support for board frequencies. Jason Thanks, in next hours i try this and post here those tests
|
|
|
|
KrK27
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 27, 2018, 03:11:54 AM |
|
Version 2.1 is now available for Z9, Mini, and Paid users; please see the original post for information. I will update the post with more details in the next few hours.
At this point in time, I am not selling additional licenses -- I need to get these images out there and the regular paid users updated before I expand; in the interim, I welcome you to use the dev-fee supported version to ensure that this firmware meets your needs.
Thank you,
Jason
Is possible use with hive os? What parameters set for each board freq in hive os? I cannot speak to HiveOS other than I think it will work with it, however HiveOS would have to add support for board frequencies. Jason Thanks, in next hours i try this and post here those tests Hive OS installed in your firm, works perfect. After apply flightsheet can set individual freqs for each board
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 27, 2018, 03:15:42 AM |
|
....snip... Hive OS installed in your firm, works perfect. After apply flightsheet can set individual freqs for each board Awesome! Can you tell me more on this? What is flightsheet? Is this something other users of hive should be able to do easily? Jason
|
|
|
|
KrK27
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 27, 2018, 03:34:34 AM |
|
....snip... Hive OS installed in your firm, works perfect. After apply flightsheet can set individual freqs for each board Awesome! Can you tell me more on this? What is flightsheet? Is this something other users of hive should be able to do easily? Jason Flightsheet is pool, wallet and pass preconfig in hive os server account, with this you can set any of your prefer coin config from a remote control (mobile,tablet ectr) at "click", and z9 start mine this.
|
|
|
|
efudd (OP)
Member
Offline
Activity: 504
Merit: 51
|
|
November 27, 2018, 03:38:44 AM |
|
....snip... Hive OS installed in your firm, works perfect. After apply flightsheet can set individual freqs for each board Awesome! Can you tell me more on this? What is flightsheet? Is this something other users of hive should be able to do easily? Jason Flightsheet is pool, wallet and pass preconfig in hive os server account, with this you can set any of your prefer coin config from a remote control (mobile,tablet ectr) at "click", and z9 start mine this. Ah, ok. So the flightsheet doesnt' let you control individual frequencies, but once you set the pool config there, you can tune the frequencies on the miner. Got it. Yeah, that makes sense. Thank you! Jason
|
|
|
|
j.weber
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 27, 2018, 03:50:20 AM |
|
Hey, just flashed this wonderful piece of software on my Antminer Z9 Mini. I have a very specific question / issue: I use minerstat (in case you don't know it, it's a monitoring / management tool for rigs and ASICs). It has a software that runs on the ASIC and a feature that checks profit from a set of pools (let's say A and B in this case) and every 30 mins (as per my setup), if pool B is more profitable than pool A, it sends by SSH a command to restart the ASIC with the updated configuration to mine in the most profitable pool (basically a profit switching mechanism). My question is: does the initial devfee apply every time the machine reboots? Or only when it's power cycled? If it applies every time, how could I get a non-devfee version of this firmware so that I can take advantage of the profit switching mechanism? (of course, by this I mean paying for your software).
Thank you in advance, great work!
|
|
|
|
|