Bitcoin Forum
November 01, 2024, 02:55:54 PM *
News: Bitcoin Pumpkin Carving Contest
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [34] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 »
  Print  
Author Topic: Efudd Z-Series Fuddware 2.3 -Z11/Z11e/Z11j/Z9/Mini  (Read 45525 times)
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 18, 2019, 09:11:29 PM
Last edit: May 20, 2019, 01:13:34 AM by efudd
 #661

https://releases.broked.net/Z11StockSSHNoSignature.zip

This is the stock Z11 firmware dated Tue Mar 12 19:47:06 CST 2019
+ SSH has been enabled
+ Signature checking has been removed for future firmware updates
+ Protection against the known antminer malware has been added
+ No Dev-Fee/Call-Home
+ No additional features or changes exist.

This can be used to enable AwesomeMiner to manage your Z11 ASIC.

SHAH256: 4c034f823a68d4a05254630a8082bad13136b3ae85399a3cfae2aac00227fb70  Z11StockSSHNoSignature.zip
MD5SUM : 393430f23dd7ac3db0740ef7acabcc6f  Z11StockSSHNoSignature.zip

That will need to be installed via SD card:

1) Format SD card 32GB or less as FAT32
2) Extract zip file contents to root of SD card
3) Power off miner.
4) Insert SD card, power on miner.
5) WAIT (30-60 seconds) for lights to go off to the right of the ethernet port.
6) Unplug miner, remove SD card.
7) Plug miner back in.
Cool [optional] Install firmware of your choice.

House Xylander
Jr. Member
*
Offline Offline

Activity: 97
Merit: 5


View Profile
April 19, 2019, 03:39:23 AM
 #662

https://releases.broked.net/Z11StockSSHNoSignature.zip

This is the stock Z11 firmware dated Tue Mar 12 19:47:06 CST 2019
+ SSH has been enabled
+ Signature checking has been removed for future firmware updates
+ Protection against the known antminer malware has been added
+ No Dev-Fee/Call-Home
+ No additional features or changes exist.

This can be used to enable AwesomeMiner to manage your Z11 ASIC.


Hopefully, now you can find that extra 40k/sols.
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 19, 2019, 03:48:46 AM
 #663

I kind of have, I just can't get it to hold it. I can get some ASICs stable at 800Mhz, and all they end up doing is getting up to 142kSol faster (30 seconds from startup vs. 5-10 minutes).

I don't have a Z11 myself this time around so I'm only able to test remotely on other peoples machines; the progress is going to be slow at best. Something I have yet to find appears to be limiting the maximum hash rate on the system (it is not the auto-tuning, I can turn that off).

-j

chipless
Jr. Member
*
Offline Offline

Activity: 559
Merit: 4


View Profile
April 19, 2019, 04:54:49 AM
 #664

I kind of have, I just can't get it to hold it. I can get some ASICs stable at 800Mhz, and all they end up doing is getting up to 142kSol faster (30 seconds from startup vs. 5-10 minutes).

I don't have a Z11 myself this time around so I'm only able to test remotely on other peoples machines; the progress is going to be slow at best. Something I have yet to find appears to be limiting the maximum hash rate on the system (it is not the auto-tuning, I can turn that off).

-j


Do you think maybe that they are throttling the voltage to control the 142k/sol and not throttling it by the freq. I have only looked at the disassembly a little bit and not enough to come to some of the conclusions you have already. Or are they using the network delay to slow down the data transfer. Cgminer can add a delay between its packets and was normally used for slow routers.

I also wonder if they are using the cgminer 4.10 source for the base since the autotuned wasn't implemented into cgminer until version 4.10 if I am correct.

Share your results with others on my Discord channel
https://discord.gg/6t62apJ
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 19, 2019, 04:57:17 AM
 #665

No to both.

chipless
Jr. Member
*
Offline Offline

Activity: 559
Merit: 4


View Profile
April 19, 2019, 05:01:55 AM
 #666

I would love to see the pic code from the Z11 …. Could be a rewrite and that is where the holdup is behind the scenes

Share your results with others on my Discord channel
https://discord.gg/6t62apJ
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 20, 2019, 09:10:08 PM
Last edit: April 20, 2019, 10:23:46 PM by efudd
 #667

Folk,

I am pleased to announce the release of Fuddware version 2.2 for the Z9 with NiceHash support! (sorry Mini users, I hope to resolve this for you soon).

This release is for the Z9 unit only and is available at https://releases.broked.net

Change log for version 2.2:

  • Adds Support for Nicehash (yay!)
  • Adds proper #xnsub support
  • Adds protection against known antminer malware.
  • NOTE: If you are a paid user, you will need to re-apply your license after upgrade.
  • SHA256: f77310d7d0cb7ea42ed84c8c5f91749767faf18af04cabab332caea26e308356  Z9_2.2.tar.gz
  • MD5SUM: 35c7a7c9bbfb321ed8603657fa36710d  Z9_2.2.tar.gz

EDIT: There was a small mistake in the image -- it has since been fixed. If you downloaded and have issues installing, please download it again.

Thank you,

Jason

efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 23, 2019, 10:10:23 PM
 #668

Z11 image is currently in testing, but due to some family commitments, I will not have time to release it until Monday, unfortunately.

On-going work will continue to further unlock these units. I have been able to see > 180kSol for brief periods of time on Z11s, but I have not been able to get it to stick more than a few minutes at a time until I find what else is acting as a limiter (my testing was done with 3x PSU to ensure that available power was not an issue).

This is the change log for the Z11 image when it does release.
==============================================
This is Fuddware 2.2 for the Z11 series miner.

* Full control is given back to the user.
    - SSH enabled
    - Frequency setting
    - No signature checking for future firmware updates
* Per-Hashboard frequency setting is enabled
* Support for NiceHash
* Proper #xnsub support
* Protection against known antminer malware

This image will not have any dev-fee for the next two weeks. After two weeks, dev-fee will be enabled once a day for 25 minutes.

NOTE: This firmware does allow you to set the frequencies as you see fit, however at this point in time, it is unlikely you will exceed 142kSol on average. I will continue to work on this highly desired feature. Setting higher frequencies just lets the unit get up to speed faster. Also, Bitmain's auto-tuning tends to be a bit too conservative and will artificially limit your hashrate.
==============================================

Thank you,

Jason


algcool
Jr. Member
*
Offline Offline

Activity: 82
Merit: 1

Cooldragon


View Profile WWW
April 29, 2019, 09:09:11 AM
 #669

Z11 image is currently in testing, but due to some family commitments, I will not have time to release it until Monday, unfortunately.

On-going work will continue to further unlock these units. I have been able to see > 180kSol for brief periods of time on Z11s, but I have not been able to get it to stick more than a few minutes at a time until I find what else is acting as a limiter (my testing was done with 3x PSU to ensure that available power was not an issue).

This is the change log for the Z11 image when it does release.
==============================================
This is Fuddware 2.2 for the Z11 series miner.

* Full control is given back to the user.
    - SSH enabled
    - Frequency setting
    - No signature checking for future firmware updates
* Per-Hashboard frequency setting is enabled
* Support for NiceHash
* Proper #xnsub support
* Protection against known antminer malware

This image will not have any dev-fee for the next two weeks. After two weeks, dev-fee will be enabled once a day for 25 minutes.

NOTE: This firmware does allow you to set the frequencies as you see fit, however at this point in time, it is unlikely you will exceed 142kSol on average. I will continue to work on this highly desired feature. Setting higher frequencies just lets the unit get up to speed faster. Also, Bitmain's auto-tuning tends to be a bit too conservative and will artificially limit your hashrate.
==============================================

Thank you,

Jason



Dear sir,

About Z11,
1, Should the Z11 can be overclocked by simple methods, such as simple update the custom firmware(no need sig), or simple app through ssh?
2, The 142k is almost the same as 135k, would you able to oc it at least about 10%?
3, If you have any update, please let me know, thanks a lot!
chipless
Jr. Member
*
Offline Offline

Activity: 559
Merit: 4


View Profile
April 29, 2019, 06:25:59 PM
 #670

Z11 image is currently in testing, but due to some family commitments, I will not have time to release it until Monday, unfortunately.

On-going work will continue to further unlock these units. I have been able to see > 180kSol for brief periods of time on Z11s, but I have not been able to get it to stick more than a few minutes at a time until I find what else is acting as a limiter (my testing was done with 3x PSU to ensure that available power was not an issue).

This is the change log for the Z11 image when it does release.
==============================================
This is Fuddware 2.2 for the Z11 series miner.

* Full control is given back to the user.
    - SSH enabled
    - Frequency setting
    - No signature checking for future firmware updates
* Per-Hashboard frequency setting is enabled
* Support for NiceHash
* Proper #xnsub support
* Protection against known antminer malware

This image will not have any dev-fee for the next two weeks. After two weeks, dev-fee will be enabled once a day for 25 minutes.

NOTE: This firmware does allow you to set the frequencies as you see fit, however at this point in time, it is unlikely you will exceed 142kSol on average. I will continue to work on this highly desired feature. Setting higher frequencies just lets the unit get up to speed faster. Also, Bitmain's auto-tuning tends to be a bit too conservative and will artificially limit your hashrate.
==============================================

Thank you,

Jason



Dear sir,

About Z11,
1, Should the Z11 can be overclocked by simple methods, such as simple update the custom firmware(no need sig), or simple app through ssh?
2, The 142k is almost the same as 135k, would you able to oc it at least about 10%?
3, If you have any update, please let me know, thanks a lot!

I am working on a custom fw for the Z11 and have increased from 142 to 143-145 I think know where the holdback may be on the speed and am trying to work around it. Bad news is it may not be able to work around because the limit may be coded into the pic chip. I have 2 possible workarounds I am testing.

Share your results with others on my Discord channel
https://discord.gg/6t62apJ
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 29, 2019, 07:52:10 PM
 #671

The limit is in the PIC or elsewhere.
 
Any increase you see is randomness.

I have long since REd and replaced the entire code path around frequency management, handling, autotuning and scanning.

-j

chipless
Jr. Member
*
Offline Offline

Activity: 559
Merit: 4


View Profile
April 30, 2019, 02:32:07 AM
Last edit: April 30, 2019, 06:02:27 AM by chipless
 #672

The limit is in the PIC or elsewhere.
 
Any increase you see is randomness.

I have long since REd and replaced the entire code path around frequency management, handling, autotuning and scanning.

-j

I am holding a small increase at 143-144, but I have theory at how it is reducing over time after monitoring this last week. The hash rate showing as the average may be spoofed. With the changes I did my hashrate went from 450-455 to 455-463 for all my miners. The z11's went from 142 to 143-144 but the miner didn't show as high of an increase like the server has in shares.

Spoofing the rate was started for gpu software so the hacker didn't know if they were getting more speed or not because no matter what was done to the software the rig showed the same speeds.

edit update...

This is my most recent hash rate  from the flypool server for 1xZ11
147.3 KH/s   5522 (100%)   0 (0%)   9 minutes ago

same miner right after update

146.5 KH/s   5493 (100%)   0 (0%)   2 minutes ago

Share your results with others on my Discord channel
https://discord.gg/6t62apJ
Marchcat2008
Newbie
*
Offline Offline

Activity: 17
Merit: 0


View Profile
April 30, 2019, 07:34:27 AM
 #673

Hello Jason.

When wait 2.2 for z9mini with NiceHash support?

Thank you.
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 30, 2019, 08:49:47 AM
 #674

Hello Jason.

When wait 2.2 for z9mini with NiceHash support?

Thank you.

Hey man, it will be at least a week. I have other non-crypto related things that are priority at the moment.

-j

efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
April 30, 2019, 08:54:32 AM
 #675

The limit is in the PIC or elsewhere.
 
Any increase you see is randomness.

I have long since REd and replaced the entire code path around frequency management, handling, autotuning and scanning.

-j

I am holding a small increase at 143-144, but I have theory at how it is reducing over time after monitoring this last week. The hash rate showing as the average may be spoofed. With the changes I did my hashrate went from 450-455 to 455-463 for all my miners. The z11's went from 142 to 143-144 but the miner didn't show as high of an increase like the server has in shares.

Spoofing the rate was started for gpu software so the hacker didn't know if they were getting more speed or not because no matter what was done to the software the rig showed the same speeds.

edit update...

This is my most recent hash rate  from the flypool server for 1xZ11
147.3 KH/s   5522 (100%)   0 (0%)   9 minutes ago

same miner right after update

146.5 KH/s   5493 (100%)   0 (0%)   2 minutes ago

Randomness. Hash rate pool side is derived based on share submission (and share difficulty) which is impacted by luck and other attributes associated with cryptography.

-j

chipless
Jr. Member
*
Offline Offline

Activity: 559
Merit: 4


View Profile
April 30, 2019, 05:41:04 PM
 #676

The limit is in the PIC or elsewhere.
 
Any increase you see is randomness.

I have long since REd and replaced the entire code path around frequency management, handling, autotuning and scanning.

-j

I am holding a small increase at 143-144, but I have theory at how it is reducing over time after monitoring this last week. The hash rate showing as the average may be spoofed. With the changes I did my hashrate went from 450-455 to 455-463 for all my miners. The z11's went from 142 to 143-144 but the miner didn't show as high of an increase like the server has in shares.

Spoofing the rate was started for gpu software so the hacker didn't know if they were getting more speed or not because no matter what was done to the software the rig showed the same speeds.

edit update...

This is my most recent hash rate  from the flypool server for 1xZ11
147.3 KH/s   5522 (100%)   0 (0%)   9 minutes ago

same miner right after update

146.5 KH/s   5493 (100%)   0 (0%)   2 minutes ago

Randomness. Hash rate pool side is derived based on share submission (and share difficulty) which is impacted by luck and other attributes associated with cryptography.

-j

When the machine is showing 144-145 that is not randomness when it has been steady

Share your results with others on my Discord channel
https://discord.gg/6t62apJ
chipless
Jr. Member
*
Offline Offline

Activity: 559
Merit: 4


View Profile
May 02, 2019, 08:51:21 AM
Last edit: May 02, 2019, 09:13:12 AM by chipless
 #677

So I hear you want to give me a fucked up image.... Thats pretty sad and low of anyone to sit and play games with someones machine like that. I dont care what your intention was or is. Thats fucking sad and your users need to be aware of sick thoughts or ideas. Whats to say you wont do that to them if you dont like what they say.

I am trying to help people and your out to fuck them so your gonna send me fucked up files trying to make it look like I dont know jack about whats going on so you can get more users.....I have seen it before and will probly see it again. I told you I have been messing with code since the age of 12 and it dont take long to get back into the groove of things. Well, I am back!!

And your the fucking idiot who wants to think he is a know it all. I will explain the voltage to your good and quick with the locations to test even... This is how to change a 7 to a 8 and get a little more speed.

In the image i started with 3/12/19 use ida do a search for 0x348 located at 3 places that is the default voltage of 840mV
Next search for 0X320 that is the low volt of 800mV located at least 6 places
Next do a search for 0x366 that is the current voltage of 870mV
Now search for 0x370 that is the high volt of 880mV

Located at 00049764 is the first byte of the running voltage and is 4 bytes to the code.
Change the 0x366 to 0x370 and you have now increased the voltage by .01 mV
If you set that over 0x370 (880mV) say to 0x371 (881mV) you get illegal voltage message even if you raise the high limit
Now you can change the 0x348 to increase the default from 840mV to whatever you want but if it is still out of the 800-880
you will get an illegal voltage message and the default is set. Even though you raise the default the pic is rejecting it and
automatically setting the 840mV

You can take a stock image change the 0x366 to 0x370 at 49764 and will automatically get an increase over the 142k
You can also undervolt them this way but may lose speed depending on the clocking.

Now anyone with winSCP and a hex editor can try it for themselves and see what they get. They can also look for the speeds like the default at location 4985C change the first or second byte of that 4 byte block and the default is now changed....And so on



Share your results with others on my Discord channel
https://discord.gg/6t62apJ
algcool
Jr. Member
*
Offline Offline

Activity: 82
Merit: 1

Cooldragon


View Profile WWW
May 02, 2019, 02:19:41 PM
 #678

So I hear you want to give me a fucked up image.... Thats pretty sad and low of anyone to sit and play games with someones machine like that. I dont care what your intention was or is. Thats fucking sad and your users need to be aware of sick thoughts or ideas. Whats to say you wont do that to them if you dont like what they say.

I am trying to help people and your out to fuck them so your gonna send me fucked up files trying to make it look like I dont know jack about whats going on so you can get more users.....I have seen it before and will probly see it again. I told you I have been messing with code since the age of 12 and it dont take long to get back into the groove of things. Well, I am back!!

And your the fucking idiot who wants to think he is a know it all. I will explain the voltage to your good and quick with the locations to test even... This is how to change a 7 to a 8 and get a little more speed.

In the image i started with 3/12/19 use ida do a search for 0x348 located at 3 places that is the default voltage of 840mV
Next search for 0X320 that is the low volt of 800mV located at least 6 places
Next do a search for 0x366 that is the current voltage of 870mV
Now search for 0x370 that is the high volt of 880mV

Located at 00049764 is the first byte of the running voltage and is 4 bytes to the code.
Change the 0x366 to 0x370 and you have now increased the voltage by .01 mV
If you set that over 0x370 (880mV) say to 0x371 (881mV) you get illegal voltage message even if you raise the high limit
Now you can change the 0x348 to increase the default from 840mV to whatever you want but if it is still out of the 800-880
you will get an illegal voltage message and the default is set. Even though you raise the default the pic is rejecting it and
automatically setting the 840mV

You can take a stock image change the 0x366 to 0x370 at 49764 and will automatically get an increase over the 142k
You can also undervolt them this way but may lose speed depending on the clocking.

Now anyone with winSCP and a hex editor can try it for themselves and see what they get. They can also look for the speeds like the default at location 4985C change the first or second byte of that 4 byte block and the default is now changed....And so on




Dear sir.

You dont oc the miners according to the source code of bmminer or cgminer.
But you directly edit the binary file?

Really cool.
algcool
Jr. Member
*
Offline Offline

Activity: 82
Merit: 1

Cooldragon


View Profile WWW
May 02, 2019, 02:47:53 PM
 #679


Hello Jason.

1. Would you able to oc a9,a9+,a9++ to get at least 10% increase?
2. Any news about oc z11?

Thank you.
efudd (OP)
Member
**
Offline Offline

Activity: 504
Merit: 51


View Profile
May 02, 2019, 03:17:55 PM
 #680

Chipless,

Learn to monkey patch and you won’t have those types of limits apply since you can rewrite the functions at runtime.

As far as my “sick thought”, let me post the entire context here so there is not anything to misconstrue.

https://imgur.com/a/gAS0mDB

You are fun to troll.

-j


Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [34] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!