[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[bouc]

I have a xfx 570 8gb (samsung memory), bios flashed, 1150 core clock - 2000 memory clock - 850 mv, most recent driver. Was expecting to get 30mhs, or at least 29, yet only getting around 27.82 https://i.imgur.com/FkrL74g.png.

Does someone know what could be? Such as maybe my bios flash wasn't so optimal, or I'm not tweaking the miner the way I should (i'm not tweaking it all, it's running on auto-tune)
Would appreciate suggestions.

hi,

Use srb polaris to pimp up your straps and set memory to 2150 (samsung goes way higher than others)
rx480 8GB samsung does 31.3 with 1150/2150

[grandmabtc]

I have a xfx 570 8gb (samsung memory), bios flashed, 1150 core clock - 2000 memory clock - 850 mv, most recent driver. Was expecting to get 30mhs, or at least 29, yet only getting around 27.82 https://i.imgur.com/FkrL74g.png.

Does someone know what could be? Such as maybe my bios flash wasn't so optimal, or I'm not tweaking the miner the way I should (i'm not tweaking it all, it's running on auto-tune)
Would appreciate suggestions.

hi,

Use srb polaris to pimp up your straps and set memory to 2150 (samsung goes way higher than others)
rx480 8GB samsung does 31.3 with 1150/2150

I did use polaris to flash the bios; copied ''777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019'' timing strap to 1750 and 2000.
Tried to use the ''one time click patch'' at first, but after flashing the pc would crash during stress testing so I rolled back. My uneducated guess on the cause for that is since the editor recognized two memories, samsung and hynix, despite my card being samsung, that made the automated strapping edit both, which caused some sort of error. With this in mind I edited only the samsung straps and this time it endured stress testing. However, I'm not getting the performance expected, making me think I did something wrong again.

As for increasing memory, that's another thing. Before flashing I messed with overclocking and undervolting a little and recall being able to get somewhat stable performance at 2150 memory. Now I can't rise it above 2000 without getting hundreds of memory errors. At 2150 I get artifacts even.
Granted, I didn't check for memory errors on the previous overclocks, but the PC gave no signs of being stressed.

Do you think I should roll the bios back and try another flashing? And any suggestion on how I should go about it?

Some pics for reference:
GPU-Z (post flash) : http://gpuz.techpowerup.com/21/03/30/nu2.png
Polaris with modded bios: https://i.imgur.com/1Was84K.png
Polaris with original bios: https://i.imgur.com/pkUTTPz.png

[heavyarms1912]

To get into B mode when mining ravencoin, would you still put --eth_config=B or would it change to something else.

No you don't enter anything like --eth_config for kawpow algo.

[nik-qz]

I have a xfx 570 8gb (samsung memory), bios flashed, 1150 core clock - 2000 memory clock - 850 mv, most recent driver. Was expecting to get 30mhs, or at least 29, yet only getting around 27.82 https://i.imgur.com/FkrL74g.png.

Does someone know what could be? Such as maybe my bios flash wasn't so optimal, or I'm not tweaking the miner the way I should (i'm not tweaking it all, it's running on auto-tune)
Would appreciate suggestions.

the nominal memory frequency of your video card is 1750 MHz, so you are unlikely to overclock it above 2050mhz
if you had a 480 / 580 card with a nominal memory frequency of 2000 MHz, then the memory frequency there can be overclocked to 2250-2300 MHz
you need to flash the cards with optimal timings and increase the cycle -tref to 30 with special programs (AMD_Memory_Tweak.exe)
this will be the maximum that you can get from such a video card

[Cryptoseekert]

rx 570 4gb Ravencoin mining on windows 10 with Team Red Miner
Hi guys

i used to mine eth with claymore dual miner then phoenix miner. at this moment, god willing, i am going to mine ravencoin. i have rx 570 4gb gpu bios moded for eth.



i was using hive os, but i had problems, i dont know if it is due to the bios mod. so ill be using windows 10 i think.



i just wanted to ask, if someone can help me:

1) what windows 10 driver should i use? i need to patch it because of the biod mod right?

2) i used tt and fanmin on phoenix/claymore. is there any similar command in trm?

3) how should a .bat look like?



thanks

[Littlegrand]

rx 570 4gb Ravencoin mining on windows 10 with Team Red Miner
Hi guys

i used to mine eth with claymore dual miner then phoenix miner. at this moment, god willing, i am going to mine ravencoin. i have rx 570 4gb gpu bios moded for eth.



i was using hive os, but i had problems, i dont know if it is due to the bios mod. so ill be using windows 10 i think.



i just wanted to ask, if someone can help me:

1) what windows 10 driver should i use? i need to patch it because of the biod mod right?

2) i used tt and fanmin on phoenix/claymore. is there any similar command in trm?

3) how should a .bat look like?



thanks

To be fair this is pretty simple stuff you should have found if you read the docs(EX search for driver in each for instance of) IE USAGE.txt / KAPOW_TUNING.txt , ETHASH_FROM_0.7_TO_0.8
1: I use a few behind newest but a newer driver: amdgpu-pro >= 20.30 or
Adrenalin >= 20.9.1.

2:Fan:
55::::20:80  Target core temp to 55C, start fan at default configuration's speed,
                                           always keep fan between 20% and 80%.

3: teamredminer -a kawpow -o stratum+tcp://us.rvn.minermore.com:4501 -u RDpPHx43bhrmdyd8L6BcpkHtjuc1vMpNSk.trmtest -p x then tune according to the document

[4Dante]

Hi people!

I want to use two instaneses of TRM (one mining eth for my vegas cards and other mining rvn for my rx 4gb cards) in HiveOS, but the only possibility to do that is setting one miner as a custom miner.

Like they explain in this post.

https://github.com/minershive/hiveos-linux/tree/master/hive/miners/custom

But I am having problems trying to config those files. (h-manifest, h-run, etc)

Can anyone help me with those files? ty to all.

[forato]

Hi people!

I want to use two instaneses of TRM (one mining eth for my vegas cards and other mining rvn for my rx 4gb cards) in HiveOS, but the only possibility to do that is setting one miner as a custom miner.

Like they explain in this post.

https://github.com/minershive/hiveos-linux/tree/master/hive/miners/custom

But I am having problems trying to config those files. (h-manifest, h-run, etc)

Can anyone help me with those files? ty to all.

are you sure that is possible to use 2 instances of TRM on Hive?

[forato]

:: RVN hashate on TRM ::

I am getting 14/15Mh's with:

 - RX 470
 - RX 480
 - RX 570
 - RX 580

Does anyone know the hashrates for:

 - RX 550
 - RX 560

I already have searched and found a video that the guy says he can make 7-10MH with RX 550 4gb. Is that correct?

[miner29]

:: RVN hashate on TRM ::

I am getting 14/15Mh's with:

 - RX 470
 - RX 480
 - RX 570
 - RX 580

Does anyone know the hashrates for:

 - RX 550
 - RX 560

I already have searched and found a video that the guy says he can make 7-10MH with RX 550 4gb. Is that correct?

i get around 7 on rvn with 560 but have a 550 on lol getting 11mhs on eth in super zombie mode x16 slot.

[4Dante]

Hi people!

I want to use two instaneses of TRM (one mining eth for my vegas cards and other mining rvn for my rx 4gb cards) in HiveOS, but the only possibility to do that is setting one miner as a custom miner.

Like they explain in this post.

https://github.com/minershive/hiveos-linux/tree/master/hive/miners/custom

But I am having problems trying to config those files. (h-manifest, h-run, etc)

Can anyone help me with those files? ty to all.

are you sure that is possible to use 2 instances of TRM on Hive?

I think so. I asked en theirs forum.

https://forum.hiveos.farm/t/two-teamredminer-in-one-rig-eth-rvn/29858/2

[forato]

:: RVN hashate on TRM ::

I am getting 14/15Mh's with:

 - RX 470
 - RX 480
 - RX 570
 - RX 580

Does anyone know the hashrates for:

 - RX 550
 - RX 560

I already have searched and found a video that the guy says he can make 7-10MH with RX 550 4gb. Is that correct?

i get around 7 on rvn with 560 but have a 550 on lol getting 11mhs on eth in super zombie mode x16 slot.

7 on 560 and on 550 maybe the same if you want to change ro rvn also?

[pop71]

Hello

what is the command line to select specific gpu(s) for mining , for example when i want to mine only in 2nd and 3rd gpus only and my rig has 5 gpus. the command line in phoenix miner is -gpus

[4Dante]

Hello

what is the command line to select specific gpu(s) for mining , for example when i want to mine only in 2nd and 3rd gpus only and my rig has 5 gpus. the command line in phoenix miner is -gpus

The command is -d

For your example is like this:        -d 1,2

Because the first gpu is 0

All the commands are here. https://github.com/todxx/teamredminer/blob/master/USAGE.txt

[peteycamey]

gpu 0 could not be mapped to ADL, will not have monitor

I keep receiving this error. anyone know why?

[batsonxl]

Will be nice if TRM adds beamhash 3 algo too

[Branko]

:: RVN hashate on TRM ::

I am getting 14/15Mh's with:

 - RX 470
 - RX 480
 - RX 570
 - RX 580

Does anyone know the hashrates for:

 - RX 550
 - RX 560

I already have searched and found a video that the guy says he can make 7-10MH with RX 550 4gb. Is that correct?

7-10? Possible, but for ethash, not kawpow

https://bitcointalk.org/index.php?topic=2046072.0

[Cryptoseekert]

rx 570 4gb Ravencoin mining on windows 10 with Team Red Miner
Hi guys

i used to mine eth with claymore dual miner then phoenix miner. at this moment, god willing, i am going to mine ravencoin. i have rx 570 4gb gpu bios moded for eth.



i was using hive os, but i had problems, i dont know if it is due to the bios mod. so ill be using windows 10 i think.



i just wanted to ask, if someone can help me:

1) what windows 10 driver should i use? i need to patch it because of the biod mod right?

2) i used tt and fanmin on phoenix/claymore. is there any similar command in trm?

3) how should a .bat look like?



thanks

To be fair this is pretty simple stuff you should have found if you read the docs(EX search for driver in each for instance of) IE USAGE.txt / KAPOW_TUNING.txt , ETHASH_FROM_0.7_TO_0.8
1: I use a few behind newest but a newer driver: amdgpu-pro >= 20.30 or
Adrenalin >= 20.9.1.

2:Fan:
55::::20:80  Target core temp to 55C, start fan at default configuration's speed,
                                           always keep fan between 20% and 80%.

3: teamredminer -a kawpow -o stratum+tcp://us.rvn.minermore.com:4501 -u RDpPHx43bhrmdyd8L6BcpkHtjuc1vMpNSk.trmtest -p x then tune according to the document

thank you very much for your help

[jebidia]

Still not seeing options for core and mem command line settings, like phoenix...Is this correct?  Any plans on adding it?

[moneytome368]

have plan to add more algo? bro