Stanlo
|
|
August 07, 2021, 07:39:44 AM |
|
I'm still getting low hashrate on my Vega 56 with max settings of core 930 mem clock 900 and 840mv any thing higher than this the GPU will crash in hiveOS, my hashrate is 44mH and here is the tweak settings I use
amdmemtweak --cl 18 --ras 23 --rcdrd 22 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 15000
The memory is hynix memory
|
|
|
|
GKumaran
Member
Offline
Activity: 204
Merit: 10
|
|
August 07, 2021, 01:01:05 PM |
|
Hello guys i hope you are all doing good one question: for ravencoin mining on windows 10, amd rx 570 4gb, what is the best way to control fans, voltages and clocks? can i do it from the miner (like eth mining on phoenix or old claymore, where i can control temps, fans, etc via a command) thanks As far as I know, you cant control voltage and clocks,.. I do it throug OverdriveNTool program. hi good sir, sorry to bother you. ive been using overdriveNtool, but when i have a power cut problem or something, and the rig restarts, it will restart on the default clocks, not the overdrive ones. how can i set them auto at win start? thanks You can setup overdriventool via its cli commands, once you have a working bat file, set it to autorun on boot via Windows Task Scheduler
|
|
|
|
GKumaran
Member
Offline
Activity: 204
Merit: 10
|
|
August 07, 2021, 01:02:38 PM |
|
Hi Trying to mine on RaveOS (8708-1983), on TRM 0.8.4 and I get "Bus error". Lol miner, Phoenix work fine on my rig. Can developers explain such behaviour of TRM 0.8.4? Thank you in advance. It should work fine, i have a feeling raveos is using a diff bus ordering. But it seems like an ez and already solved bug ni rave os if any. Try asking the rave os devs
|
|
|
|
smilodon
Member
Offline
Activity: 127
Merit: 10
|
|
August 09, 2021, 06:59:42 PM |
|
Hi, I have some issues when using for xhv coin under linux ( RaveOS) comparing with windows. Under linux my baffin cards like RX 550 2Gb, RX 560 2Gb works only 300 h/s. But it will get 500 h/s more in windows, with same core, mem, and voltage. Let me know the problem and how to solve it. Thank you.
try cn_config=6+0AAA 400+ hash its driver bug on baffin.
|
|
|
|
abrgeza
Jr. Member
Offline
Activity: 117
Merit: 2
|
|
August 13, 2021, 11:22:21 AM |
|
I'm still getting low hashrate on my Vega 56 with max settings of core 930 mem clock 900 and 840mv any thing higher than this the GPU will crash in hiveOS, my hashrate is 44mH and here is the tweak settings I use
amdmemtweak --cl 18 --ras 23 --rcdrd 22 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 15000
The memory is hynix memory
44MH/s is not bad. For anything higher you need to raise core clock to 1000MHz or more and mem clock. Hynix is not good for overclocking on vega56 cards. If you can flash vega64 bios do it and raise mem clock to 950-1000MHz. Try to lower --rcdrd as much as you can. This is a basic settings for hynix memory: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600
|
|
|
|
SergeySS
Newbie
Offline
Activity: 15
Merit: 0
|
|
August 19, 2021, 07:47:32 AM Last edit: August 19, 2021, 08:00:56 AM by SergeySS |
|
Can't connect to pool nicehash
teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x
[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error. [2021-08-19 10:41:43] Shutting down...
|
|
|
|
Zotak337
Member
Offline
Activity: 232
Merit: 10
|
|
August 19, 2021, 08:08:33 AM |
|
I'm still getting low hashrate on my Vega 56 with max settings of core 930 mem clock 900 and 840mv any thing higher than this the GPU will crash in hiveOS, my hashrate is 44mH and here is the tweak settings I use
amdmemtweak --cl 18 --ras 23 --rcdrd 22 --rcdwr 11 --rc 34 --rp 13 --rrds 3 --rrdl 4 --rtp 6 --faw 12 --cwl 7 --wtrs 4 --wtrl 4 --wr 11 --rfc 164 --REF 15000
The memory is hynix memory
44MH/s is not bad. For anything higher you need to raise core clock to 1000MHz or more and mem clock. Hynix is not good for overclocking on vega56 cards. If you can flash vega64 bios do it and raise mem clock to 950-1000MHz. Try to lower --rcdrd as much as you can. This is a basic settings for hynix memory: --RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600 Whoever you are thank you, I have a hynix Vega 56 and that RCDRD 19 fixed my issue I am able to get extra hashrate now and also less temp on memory, I will try the others as well 👍👍
|
|
|
|
XUR_TIP
Member
Offline
Activity: 227
Merit: 24
|
|
August 19, 2021, 08:49:28 AM |
|
Can't connect to pool nicehash
teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x
[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error. [2021-08-19 10:41:43] Shutting down...
How do you set this up? Are you mining through windows OS or hiveOS? I got better performance connecting to nicehash pool through HiveOS, the OS already have nicehash settings in place already, when trying to add wallet search nicehash instead
|
|
|
|
SergeySS
Newbie
Offline
Activity: 15
Merit: 0
|
|
August 19, 2021, 09:00:43 AM |
|
Can't connect to pool nicehash
teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x
[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error. [2021-08-19 10:41:43] Shutting down...
How do you set this up? Are you mining through windows OS or hiveOS? I got better performance connecting to nicehash pool through HiveOS, the OS already have nicehash settings in place already, when trying to add wallet search nicehash instead Windows 10
|
|
|
|
GKumaran
Member
Offline
Activity: 204
Merit: 10
|
|
August 20, 2021, 11:24:51 AM |
|
Can't connect to pool nicehash
teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x
[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error. [2021-08-19 10:41:43] Shutting down...
The stratum for autolykos is : stratum+tcp://autolykos.eu-west.nicehash.com:3390 stratum+tcp://autolykos.eu-north.nicehash.com:3390 https://www.nicehash.com/stratum-generator
|
|
|
|
SergeySS
Newbie
Offline
Activity: 15
Merit: 0
|
|
August 21, 2021, 06:33:19 AM |
|
Can't connect to pool nicehash
teamredminer.exe -a autolykos2 -o stratum+tcp://autolykos.eu.nicehash.com:3390 -u xxxxxxx.3 -p x
[2021-08-19 10:41:23] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, q - quit [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connecting to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com successfully connected to address 172.65.200.133. [2021-08-19 10:41:38] Pool autolykos.eu.nicehash.com connection was closed due to an error. [2021-08-19 10:41:43] Shutting down...
The stratum for autolykos is : stratum+tcp://autolykos.eu-west.nicehash.com:3390 stratum+tcp://autolykos.eu-north.nicehash.com:3390 https://www.nicehash.com/stratum-generatorThanks for the link, it works with it
|
|
|
|
nik-qz
|
|
August 24, 2021, 09:48:00 AM |
|
hi is this behavior of the TRM miner normal? a lot of jobs are received per second all the time, while on the same pool if I run another miner, for example trex for nvidia, there are no such problems there work is done at normal speed
|
|
|
|
Trietch
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 24, 2021, 06:19:44 PM |
|
Hello, since the v0.8.2 update I keep getting "GPU 2 : detected DEAD" every hour on my stable rig. When I look at the log, the card is still at normal hashrate when detected DEAD Tried to reduce overclock and increase voltage, still having this issue. Can this be caused by the miner detecting the card DEAD when it's not? Thanks you can check the usb cables, riser and finally reinstall the driver I got the same issue on GPU0, despite of changed all hardware (Rizer, Cable, Motherboard, Power Supply) also the AMD driver from 18.6.1 to 20.11.2 but still was getting Dead GPU message. Finally downgraded to v0.8.2 and continue mining ETH without hassle. Finally it was a power cable problem. So everything is fine for me with v0.8.3
|
|
|
|
nik-qz
|
|
September 07, 2021, 08:33:48 AM |
|
launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
|
September 07, 2021, 03:56:05 PM |
|
Team Red Miner v0.8.5 release
|
|
|
|
nik-qz
|
|
September 14, 2021, 10:28:23 AM |
|
launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4
when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans
|
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
September 17, 2021, 10:02:09 PM |
|
launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4
when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans Interesting, can you tell me what driver version you're on and I'll try to reproduce?
|
|
|
|
nik-qz
|
|
September 18, 2021, 09:39:55 AM |
|
launched a farm profile that worked on version 8.4 to version 8.5 and shows some kind of error -8 on one of the 5700 video cards with ADL fan control and will not start, I had to return version 8.4
when activating the option --fan_control = 63 ::: 50: 1: 90 in version 8.5, the program does not start if there are 5700 video cards , fix it otherwise it is impossible to control the fans Interesting, can you tell me what driver version you're on and I'll try to reproduce? of course ATI_AdrenalinDrivers20.5.1. OverdriveNTool2.9 works with these drivers, so I use them
|
|
|
|
Wotan Wipeout
Member
Offline
Activity: 438
Merit: 27
|
|
September 19, 2021, 05:12:57 PM |
|
I dont understand the Fan Control, sorry. Tried to set the fans of my 6900XT to 70% using
--fan_default_big_navi=70
Where is my mistake?
thx
|
|
|
|
nik-qz
|
|
September 19, 2021, 09:40:58 PM |
|
I dont understand the Fan Control, sorry. Tried to set the fans of my 6900XT to 70% using
--fan_default_big_navi=70
Where is my mistake?
thx
for example how i do if there are two types of cards 5700 and 580 --fan_control=63:::50:1:90 --fan_default_navi=61:76:94:50:1:90 --fan_default_polaris=63:::50:1:90 if you only have Navi big 6900 cards then try this with your values --fan_control=61:76:94:50:1:90 --fan_default_big_navi=61:76:94:50:1:90 where the values are as follows Temp_core,Tjct,Tmem_max,fan_start,fan_min,fan_max
|
|
|
|
|