[ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More

[BogdanCo]

Hello

Using the new TRM 0.10, I have quite frequently this error:

Code:

:0:rocdevice.cpp            :2603: 0666232413 us: 11014: [tid:0x7fcb738d9700] Device::callbackQueue aborting with error : HSA_STATUS_ERROR_MEMORY_FAULT: Agent attempted to access an inaccessible address. code: 0x2b
[2022-06-02 16:54:42] Watchdog script executor thread exiting.
/root/xminer.sh: line 195: 11009 Aborted                 ${minerSudo} /root/miner/${MINER_PKG_NAME}/${MINER_FILE} ${MINER_OPTIONS_GO}

I don't know what can be, because it's not only on one rig....

[1714669470]

1714669470

[1714669470]

1714669470

[1714669470]

1714669470

[psiz]

In version 0.10 , my RX480 keeps crashing, totally random with cards.
In version 0.9.4.2, my RX480 works well months.

[DrX]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

Usually, but not worth the fight for couple eurocents.

[sxemini]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

Usually, but not worth the fight for couple eurocents.

Not worth? When you have 200 GPU´s running than it is worth enough. TRM stable in all ways, R Mode no problem, some old polaris rigs save 20w and gained 2mh - nice optimization for this old cards.

Compared to lolminer the difference per 6 card polaris rig is over 60w less power and 3 - 4% more hashrate, for me, this is huge.

[profcb]

Hi guys!

Could someone help me out with the Fan control options?

How should I enter the command for a GPU?
Core Temp 50
Mem Temp 65
Min fan 75
Max fan 98

--fan_control=50::65:75 is without the max fan, where to put max fan %

Any help would be appreciated.
Thanks

[DrX]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

Usually, but not worth the fight for couple eurocents.

Not worth? When you have 200 GPU´s running than it is worth enough. TRM stable in all ways, R Mode no problem, some old polaris rigs save 20w and gained 2mh - nice optimization for this old cards.

Compared to lolminer the difference per 6 card polaris rig is over 60w less power and 3 - 4% more hashrate, for me, this is huge.

with 200 GPU its still only couple euros a day (with my electricity price). For me its not worth the trouble and time...
But still good work from TRM team.

Everyone should use the program which suits and works best for them.
Just wanted to note that the change from lol to TRM wasnt easy at least for me...

[igotek]

TON pow mining will last in a few days.
Can TeamRedMiner mine dual ETH + X ?

ALPH, CFX, ERG, RVN ?

[MolemanTux]

TON pow mining will last in a few days.
Can TeamRedMiner mine dual ETH + X ?

ALPH, CFX, ERG, RVN ?

Same question here!!
Tried ERG + ETH for example, but giveme error...

[DrX]

Using R-Mode with 5700(XT) Seems to be quite unstable, at least for me..

EDIT: Even RX580 keeps crashing, totally random with cards, Rig was stable 9 months with LoL and now with TRM crashing all the time.
Maybe i will change back, i lose 100w but get stable rig...

Change your OC. If the OC work with lolminer is not meaning it will work with TRM. Go to discord channel and ask the devs, but mostly the problems is in front of the monitor 

Problem was with the miner, now with new update miner works perfectly.

Thanks for the fix & update TRM team

[DooGZ]

should we remove any MPT modification with the current GPU BIOS for R-mode to work or to be stable?


I followed this for MPT and use APPLE Straps.

- Under Feature Control, set:
DS UCLK: Check (Enable)
GFXOFF: Uncheck (Disable)

- Under Overdrive Limits tab, set:
GFX Maximum Clock 1440 MHz
Memory Maximum Clock 960 MHz
Power Limit Maximum 0%
Power Limit Minimum 0%
Memory Timing Control 1 [For computing (mining), default is 2 for gaming]

- Under Power and Voltages, set:
Maximum Voltage GFX 1050 mV [must not be lower than this as the MVDD default value in the vbios is at 1350 mV and the VDD must be within 300 mV range with MVDD or components may get degraded and permanent damaged]
Maximum Voltage SoC 1050 mV [must not be lower than this like the Maximum Voltage GFX]
Minimum Voltage GFX 750 mV
Minimum Voltage SoC 750 mV
Power Limit GPU 126 W (120 W for non XT)
TDC Limit GFX 110 A (105 A for non XT)
TDC Limit SoC 12 A (10 A for non XT)
(If 126 W was chosen for Power Limit GPU then for TDC Limit GFX is 110 A)

- Under Frequency tap, set:
GFX Maximum 1260 MHz
Memory DPM 3 - 910 MHz

- Under Fan tab, set:
Zero RPM Enabled: Uncheck (Disable, for those who have high memory temperature)
Stop Temperature: 50° C
Start Temperature: 60° C

[deedeeranged]

Hi guys!

Could someone help me out with the Fan control options?

How should I enter the command for a GPU?
Core Temp 50
Mem Temp 65
Min fan 75
Max fan 98

--fan_control=50::65:75 is without the max fan, where to put max fan %

Any help would be appreciated.
Thanks

If I read it right in the usage.txt it is like
Core temp : Junction temp : memory temp : initial speed : min speed : max speed
so according to my dum brain it should be for you AFAIK
50::65::75:98

Hope this helps

[igotek]

This error happens only on RX 5700 XT graphic cards rigs. I have 8 pcs rigs with 12 pcs RX5700 XT Sapphire Nitro+

My all RX 6600 rigs work well.

Why I am getting this error on RX 5700 XT gpus ?

[batsonxl]

I really enjoy how TRM is handling core or mem temps working perfect. Can you please add more algorithms like beamv3 zelhash and many if possible.thanks

[UnclWish]

Here
https://teamredminer.info/documentation/arguments/#clockvoltage-control-options-windows-only-beta-functionality
Described clk_core_mhz, clk_core_mv and etc command line arguments
But miner wan't start with this parameters: unrecognised option '--clk_core_mhz=1280'
So, is clocks/voltage settings supported, or no?

What version of miner you're use? On latest 0.10.3.1 for my AMD 580 card this options work:
--clk_core_mhz=1250 --clk_core_mv=937 --clk_mem_mhz=2250 --clk_mem_mv=850

And it's only for Windows as I know. And I use latest AMD driver.

[FP91G]

Team Red Miner v0.10.4

Introducing single algo KASPA gpu mining. At the time of writing, the expected performance increase is 4-8% above existing AMD miners, at about the same power. It will depend on gpu type and tuning. A follow-up release will add dual mining R-mode ethash+kas.

README highlights:

GPU: Added KASPA single algo mining (fee 1.0%, use -a kas).
GPU: Added simpler way of forcing hashrate reports for kawpow/firopow (use --prog_hash_report).
GPU: Fixed missing hashrate reports in some cases for kawpow/firopow with multiple pools.

https://github.com/todxx/teamredminer/releases/tag/v0.10.4

Be sure to check the links in the first post, this is introductory information

[Xeil]

Does R-Mode work with the ETCHASH algorithm?

[igotek]

is there a way to see the rejected shares from which GPU while mining NIM ?

[heavyarms1912]

Does R-Mode work with the ETCHASH algorithm?

yeah it does on any ethash algo. etchash is ethash variant.

[MegaVlad]

Yo, guyz!

TRM 0.10.5.1

Periodically i get "Miner restarted after error" with this log record:

:0:rocdevice.cpp            :2614: 44323066915 us: 1820 : [tid:0x7efbff96a700] Device::callbackQueue aborting with error : HSA_STATUS_ERROR_MEMORY_FAULT: Agent attempted to access an inaccessible address. code: 0x2b
Aborted

Based on this entry, how to understand which card is causing the failure?
Thanks in advance!

[Dowper_]

Try to mine with only one GPU at a time, until you found the faulty one.