[ANN] The First Litecoin PPS Pool (litecoinpool.org)

[surferdudemi]

Is there a way to download the User Hash Rate data that's used to generate the Charts?
Thanks
I'm seeing about 1.7% stale shares with Antminer L3+.  Ping time to us, us2, and generic addresses are around 28 ms, 66 ms, and 98 ms, respectively:

ping litecoinpool.org

Pinging litecoinpool.org [88.80.187.187] with 32 bytes of data:
Reply from 88.80.187.187: bytes=32 time=98ms TTL=48
Reply from 88.80.187.187: bytes=32 time=98ms TTL=48
Reply from 88.80.187.187: bytes=32 time=98ms TTL=48
Reply from 88.80.187.187: bytes=32 time=98ms TTL=48

Ping statistics for 88.80.187.187:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 98ms, Maximum = 98ms, Average = 98ms

ping us2.litecoinpool.org

Pinging us2.litecoinpool.org [104.236.136.96] with 32 bytes of data:
Reply from 104.236.136.96: bytes=32 time=66ms TTL=43
Reply from 104.236.136.96: bytes=32 time=66ms TTL=43
Reply from 104.236.136.96: bytes=32 time=66ms TTL=43
Reply from 104.236.136.96: bytes=32 time=67ms TTL=43

Ping statistics for 104.236.136.96:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 66ms, Maximum = 67ms, Average = 66ms

ping us.litecoinpool.org

Pinging us.litecoinpool.org [104.236.57.24] with 32 bytes of data:
Reply from 104.236.57.24: bytes=32 time=28ms TTL=47
Reply from 104.236.57.24: bytes=32 time=28ms TTL=47
Reply from 104.236.57.24: bytes=32 time=27ms TTL=47
Reply from 104.236.57.24: bytes=32 time=26ms TTL=47

Ping statistics for 104.236.57.24:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 26ms, Maximum = 28ms, Average = 27ms

I recently upgraded my cable modem and upgraded from CAT 5/6 to CAT 8 cabling and reduced the number of internal switches in the path from the miners to the modem.  So now I'm at a loss as to how to further reduce the stale shares.  Any suggestions?

[pooler]

Is there a way to download the User Hash Rate data that's used to generate the Charts?

Currently, no, but if you only need daily data points you can download the CSV from your Rewards page.

I'm seeing about 1.7% stale shares with Antminer L3+.  Ping time to us, us2, and generic addresses are around 28 ms, 66 ms, and 98 ms, respectively: [...]
I recently upgraded my cable modem and upgraded from CAT 5/6 to CAT 8 cabling and reduced the number of internal switches in the path from the miners to the modem.  So now I'm at a loss as to how to further reduce the stale shares.  Any suggestions?

I would guess that the two most likely possibilities are that the bulk of the latency arises either at the miner's level, before shares are actually sent over the network (which could happen because of a hardware or firmware issue or quirk), or at some point along the network path (e.g. by a firewall examining TCP traffic, which wouldn't affect ping times).

[Butchio]

Hi folks,

Real quick Q, sorry if the answer is in this thread, I couldn't find a way to specifically search this thread.

I have some L3+ in a remote location with unstable electricity, so that the electric sometimes goes down.

First question is whether there is some way to receive a text message or other type of notification than an email.. (Perhaps through IFTTT or another service).

Second question is if there is someway to power cycle the breakout boards remotely... Currently I have to physically attend the location and that is simply switch the breakout boards to the OFF position and then back onto the ON position.

I've tried power cycling the power outlet (Plug socket), or extension gang /lead in these instances but this doesn't work... Seems the PSU only kicks back in upon physically cycling the breakout board switch.

Was thinking some kind of GSM or IP OPERATED servo, but maybe there is an easier way?

Anyway thanks for the the pool and everything you are doing for the LTC community.

Bye for now,
Butchio,

Ps. Sorry if this is the wrong thread to post in, I happen to use LTCpool and hoped someone might have knowledge, if this is the wrong forum and someone knows a better one, be great to know.

[Avenit]

What is OK stale shares %? I see 0 stales on my Antminer sw and 3.14% Litecoinpool.org.

3% is pretty bad. Most users are currently below 0.25%. Keep in mind that stale shares are caused by latency. And unfortunately latency can be introduced by many different things, from overclocking to networking hardware getting in the way.

Hello! please tell me, can I see this in the future?

hi! please add a value in BTC and USD next to the "Past 24 hours Rewards" field, you already have all the courses, I think it will be easy to do.

[pooler]

hi! please add a value in BTC and USD next to the "Past 24 hours Rewards" field, you already have all the courses, I think it will be easy to do.

We will consider it, but personally I'm not a fan of this idea. I think the Rewards section should contain exact figures only. The pool deals in LTC exclusively, and adding any estimates that depend on (potentially highly volatile) exchange rates may be seen as misleading by some users.

[Avenit]

hi! please add a value in BTC and USD next to the "Past 24 hours Rewards" field, you already have all the courses, I think it will be easy to do.

We will consider it, but personally I'm not a fan of this idea. I think the Rewards section should contain exact figures only. The pool deals in LTC exclusively, and adding any estimates that depend on (potentially highly volatile) exchange rates may be seen as misleading by some users.

Yes, the rates can be very volatile, I think all miners know and understand this. There is already a recalculation for 1 LTC in the page header, but my power is not equal to that, which is why there is a difficulty with the calculation, so the recalculation in relation to the daily income is very convenient.

The calculator also has a recalculation, but for some reason it does not use Reference Currency, and it is not convenient to substitute your data all the time.

Conversion to BTC/Reference Currency is very important and convenient in my opinion and should be available in a hint or in a separate field next to all values in LTC.

[Bit_Faced]

What is OK stale shares %? I see 0 stales on my Antminer sw and 3.14% Litecoinpool.org.

3% is pretty bad. Most users are currently below 0.25%. Keep in mind that stale shares are caused by latency. And unfortunately latency can be introduced by many different things, from overclocking to networking hardware getting in the way.

I mentioned this a few months ago (post #1398). Mine are also ranging from 1.68% to 1.75%. They seem to have peeked out there. They steadily rose this year. Before they were all at ~.35%.

[beridzee]

Another reason to choose PPS: you get paid even when blocks get out of the main chain.

There was one rather long (27 blocks) chain that became orphaned 7 hours ago, and two of those blocks were found by our pool.
Did this affect your earnings? Not at all! (It only affected the pool's wallet, d'oh! )

Here is the root of the orphaned chain:
http://blockexplorer.sytes.net/block/51eb5d3c807107c6e9dc5ba0074883b718d1a5fe48f245f8cef53eff74ee09dc

Hello , My Account At litecoinpool org found 2 blocks ,
Why Finding a block does not result in any additional reward?!

Can anyone Help me with that question?!

[pooler]

Another reason to choose PPS: you get paid even when blocks get out of the main chain.

There was one rather long (27 blocks) chain that became orphaned 7 hours ago, and two of those blocks were found by our pool.
Did this affect your earnings? Not at all! (It only affected the pool's wallet, d'oh! )

Here is the root of the orphaned chain:
http://blockexplorer.sytes.net/block/51eb5d3c807107c6e9dc5ba0074883b718d1a5fe48f245f8cef53eff74ee09dc

Hello , My Account At litecoinpool org found 2 blocks ,
Why Finding a block does not result in any additional reward?!

A miner's rewards are based on submitted shares, and completely independent of whether they find blocks. This is consistent with the message you quoted. See also the Beginner's Guide and the FAQ.

[coblee]

Pooler, wen MWEB?

[MoparMiningLLC]

Pooler, wen MWEB?

^^^ this 100%

I am still pointing my scrypt miners here as well

[pooler]

Pooler, wen MWEB?

Soon™
Seriously though, testing of the release candidate is already underway.

[ytem837632]

Hello. Help me. My machines often give this error in the log:

Rejected 036a45a3 Diff 19.2K/16384 L3 0 pool 0 (prevhash-stale)
Feb 12 15:26:55 (none) local0.notice cgminer[29444]: Rejected 1ca04f8e Diff 586K/16384 L3 0 pool 0 (prevhash-stale)
Feb 12 15:31:34 (none) local0.notice cgminer[29444]: Rejected 82033ec6 Diff 129K/65536 L3 0 pool 0 (prevhash-stale)
Feb 12 15:43:01 (none) local0.notice cgminer[29444]: Rejected b025506c Diff 95.2K/65536 L3 0 pool 0 (prevhash-stale)

And this is just a piece of text.
I understand what is connected with the pool, does it give the wrong complexity?
I don't understand how I can specify my difficulty. I have bitmain L3+
suppose password: passw
What should be added there to indicate its complexity?

P.S. I apologize if it's not clear what I'm talking about. I am writing through a translator.

[beridzee]

Hello Dear Litecoinpool and also Users,

I am user of Litecoinpool more than year and I have a question for you please :

Past 24 hours Rewards was 0.15-0.18 LTC , ( Antminer L3+ Workers 4 , average Speed   2,500 MH/s )   But  final several month it going down to 0.10 - 0.11 LTC  - 24 Hours  what is the reason? As I know In Kazakhstan miners turned off also many big countries restricted mining and I should make miners earn more ?!

User: Beridee
Email: standardgro@gmai.com

SIncerely,
George B.

[pooler]

Past 24 hours Rewards was 0.15-0.18 LTC , ( Antminer L3+ Workers 4 , average Speed   2,500 MH/s )   But  final several month it going down to 0.10 - 0.11 LTC  - 24 Hours  what is the reason? As I know In Kazakhstan miners turned off also many big countries restricted mining and I should make miners earn more ?!

Difficulty has about doubled since last July, going from 7M to 15M, so the hash power on the network has definitely increased. And miners' rewards are inversely proportional to the network's difficulty.

[beridzee]

Hello , Thank you For Fast Blast Answer I mean I had 2519 MH/s 4 workers ( also 2 workers worked 12 hours) 08.09.21  it was 0.16 Past 24 Hours 

it is a fact that an increase in difficulty leads to a decrease in rewards, but why did this happen?
miners are disabled in kazakhstan also miners are disabled in many large places,
what caused this increase, please tell me?



08.09.21 Miner Income
https://ibb.co/YLmbND1

[pooler]

it is a fact that an increase in difficulty leads to a decrease in rewards, but why did this happen?
miners are disabled in kazakhstan also miners are disabled in many large places,
what caused this increase, please tell me?

Difficulty has risen because the hashing power on the Litecoin network has increased. This means more and/or faster miners compared to a few months ago. As to how exactly this happened, we have no way of knowing for sure. We just know that the mining network as a whole is faster because it can now solve a block that is twice as difficult as the blocks we had last July in the same amount of time.

[beridzee]

Thank you for you Full Answer now I am fully Understand Situation    . Please Can you Point me for some link or place where Shown History of LTC  Difficulty risen and the hashing power on the Litecoin network has increased ?! Some kind of timeline of this situation! Thank you and have a great day... 

[pooler]

Please Can you Point me for some link or place where Shown History of LTC  Difficulty risen and the hashing power on the Litecoin network has increased ?! Some kind of timeline of this situation!

https://bitinfocharts.com/comparison/litecoin-difficulty.html#1y

[beridzee]

Thank you    THANKS