[ANN][VRC] VeriCoin Proof of Stake-Time Currency | New Roadmap Released

[pnosker]

http://vrc.0feepool.com/


0% Fee pool online for pre-registration
PROP reward system.
Stratum with vardiff. Max is 2048, more effective for hig hashrate rigs.
Stable SSD Server, DDOS protection.
Cashout are processed every minute.
EMail Support

Would you please help me to draw in your pool dug about 7K+ coins? Your pool has been maintained

Berric has the pre-fork wallet recovered and alright. He's working on getting the pool back on the right blockchain and will pay out the pre-fork wallet earnings.

[Burninj]

Anyone having valid nodes, my wallet doesn't synch anymore...

[nikos64]

2. PoH pool just found its first block

WUHU =)

Please, consider a more logical withdraw amount.
500 VRC is too much for small miners.

ok sry, change to 100.

Do you think that is ok or still to high?

It's OK with the current difficulty level, but the min Cash Out amount should be at least 10 times smaller than that.
Thanks

[sdmathis]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

[effectsToCause]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

[testbug]

2. PoH pool just found its first block

WUHU =)

Please, consider a more logical withdraw amount.
500 VRC is too much for small miners.

ok sry, change to 100.

Do you think that is ok or still to high?

It's OK with the current difficulty level, but the min Cash Out amount should be at least 10 times smaller than that.
Thanks

Ok, thanks for that feedback.

Your wish is my command

manual payouts can be run now with just 25 VRC (1% of Blockvalue is ok i hope).

In the end of the PoS we will lower that value so everyone can get all their coins out without any problems.

This "payout fix" is for the Pool #1 and #2.

[enetac]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed
VG6agMawA8nWu6yeh2EavJmzVnTbGtmbvX

[testbug]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

[enetac]

http://

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839829719
There is no solution

[kubiq]

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

There is no solution

seems that could be a permissions problem, have you tried to run the wallet as admin?

[birty555]

Im also getting a wallet crash on windows now - tried deleting everything (including wallet.dat) and it works fine up until its nearly finished syncing then crashes. Its the new version of the windows wallet and has been working fine up until now. Anyone got any suggestions?

[effectsToCause]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

There is no solution

try deleting your vericoin.conf file as well.  Then launch it, if it crashes launch it again. Don't delete wallet.dat

[enetac]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

There is no solution

try deleting your vericoin.conf file as well.  Then launch it, if it crashes launch it again. Don't delete wallet.dat

The same result.
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839829719
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839781277

[pnosker]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

There is no solution

try deleting your vericoin.conf file as well.  Then launch it, if it crashes launch it again. Don't delete wallet.dat

The same result
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839829719

Delete everything but the wallet.dat. then restart your computer. Then try again.

[effectsToCause]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

There is no solution

try deleting your vericoin.conf file as well.  Then launch it, if it crashes launch it again. Don't delete wallet.dat

The same result.
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839829719
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839781277

you could also make a new wallet.dat by copying the key from it and pasting it into a new file.  It might of been corrupted.

[enetac]

Anyone having valid nodes, my wallet doesn't synch anymore...

addnode=107.170.140.210

-If you haven't yet download new version posted this morning do that

-As sdmathis said put addnode=107.170.140.210 in your vercoin.conf file (%Appdata%\Roaming\Vericoin folder (Windows))

-If still you have problems delete everything in %Appdata%\Roaming\Vericoin except wallet.dat and vericoin.conf

EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

About 100000 VRC loss
 I felt very disappointed

Backup your wallet.dat

delete everything on your Vericoinfolder in the appdata (includeing the wallet AND your vericoin.conf, BUT PLEASE BACKUP IT BEFORE!!!!!)

Download the newly released version (if you didn't already).

Start the new version ==> new blanco wallet is going to be created.

let is sync completely

Close the vericoin wallet

take your old wallet.dat and copy it over the newly created one.

Start your vericoin wallet again and your coins should be back.

If this didn't help post again i'll try to assist you.

A fatal error occurred.VeriCoin can no longer continue safely and will quit
EXCEPTION:St13runtime_error
CDB():can`t open datebase file wallet.dat,error-30974
D:\Program Files\vericoin-qt\vericoin-qt.exe in ProcessMessages()

There is no solution

try deleting your vericoin.conf file as well.  Then launch it, if it crashes launch it again. Don't delete wallet.dat

The same result.
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839829719
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839781277

you could also make a new wallet.dat by copying the key from it and pasting it into a new file.  It might of been corrupted.

The new situation
http://photo.163.com/netac/#m=2&aid=267457434&pid=8839811839

How to do?
Permanently lost?

[testbug]

How to do?
Permanently lost?

sadly i can't open your screenshot, i can only see "chinese" (sry if it's not chinese!!) letters and i can't read them

[majeis]

I think I'm having the same problem.

Windows client crashes for me now as soon as it loads the current block chain. Deleting the block chain fixes it, but then downloading the blockchain causes it to crash as soon as it's completed, and trying to opening the client again on will crash on load. Reboot does nothing.

[enetac]

How to do?
Permanently lost?

sadly i can't open your screenshot, i can only see "chinese" (sry if it's not chinese!!) letters and i can't read them

?
I've given up
 

[testbug]

How to do?
Permanently lost?

sadly i can't open your screenshot, i can only see "chinese" (sry if it's not chinese!!) letters and i can't read them

?
I've given up
 

Don't give up!

let's be a strong comunity!

I am trying to recompile the windows wallet on my windows 7 64bit machine from the github sourcecode, because its running fine on the servers.