Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:15:53 PM |
|
I know.. but I won't get more for my 7950 than what I'd have to pay for a 750Ti. And 230 watts is like a tad bit more than running idle ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) If you're using 230W at idle something is wrong. All of my rigs use 40-50W at idle with no vid cards, 100-120W with 3-5 cards. My rig at idle using 255W (AMD6300 + 280x+7870+7850+5670 + 6 funs) that's too much bro, my 280x in idle consume only 20w so with 4 card is only around 100w
|
|
|
|
JPS2K5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:19:41 PM |
|
I know.. but I won't get more for my 7950 than what I'd have to pay for a 750Ti. And 230 watts is like a tad bit more than running idle ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) If you're using 230W at idle something is wrong. All of my rigs use 40-50W at idle with no vid cards, 100-120W with 3-5 cards. I5 2500K, and my monitor alone uses 60 watts. Nothing is wrong, really ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I think it uses about 180 watts idle, 230 when mining. I'm just running the miner since it's on all day anyways. Not like I have a tweaked mining rig with the cheapest processor and whatnot.
|
|
|
|
ozzy1926
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:51:16 PM |
|
which coin should we mine with this minerto make profit?DRK difficulty sky rockets
|
|
|
|
JPS2K5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 04:53:28 PM |
|
which coin should we mine with this minerto make profit?DRK difficulty sky rockets
I just let it run on www.coinmine.pw ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Stuzul
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 05:06:24 PM |
|
if the cards are only using half the power, does that mean it would be possible to add twice as many GPU's to a PSU? got 4x 7950's running on a 1000W PSU, would be sick to get 7 on there. would need plenty of ide-pci cables though
|
|
|
|
PetrGasparik
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 05:07:12 PM |
|
Gpu thread 1 I 20 work for me on win7
Ok, thx, I will try. Does anybody using Smos linux for mining? I do. Can you give me config files? how is that related to SMOS? I dont understand your question. I need config file which works on Smos 1.3 for R9 270, R9 280x and 7950. My old gpu setting does not work on this new miner. I dont understand your question, either ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) config files are not dependant on OS, only on miner. So there is no config that works best on SMOS, only on particular miner and card. So it makes sense to ask for 290 config for sgminer_x11mod, not general cinfig for SMOS. My config is for 290 and is not working very well...
|
|
|
|
Eastwind
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 05:49:14 PM |
|
if the cards are only using half the power, does that mean it would be possible to add twice as many GPU's to a PSU? got 4x 7950's running on a 1000W PSU, would be sick to get 7 on there. would need plenty of ide-pci cables though
Most of my systems use 8 GPU with combination of 7990 and 7970. They use about 750W mining x11 coins. They are underclock and undervoltage a lot to save energy as my electricity is 25c per kWh.
|
|
|
|
gilad215
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 05:52:59 PM |
|
Guys please help.
i have a rig with 5x280x and 1x290
when i try to run sgminer with this mod kernel my 290 fails with error in kernel -5 and sgminer says gpu fail i have only 2gb ram so i set tc-8192. but the 290 wont even start. on a regular darkcoin.cl kernel it works! anyone have this issue with 290?
thank you
|
Neluns ♦ New Generation Financial Ecosystem ♦ Pre-sale on Aug, 1
|
|
|
komodovpn
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 06:54:10 PM |
|
Switched to this version of sgminer and now I am getting about 2.1 MH/s per ASUS R9 270 GPU using suggested settings by OP
Thanks for sharing!
|
|
|
|
Sophokles
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 07:55:19 PM |
|
Great! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Getting 3.1 MHash/s each with 4* Sapphire Radeon 7970 on GA-990FXA-UD5 OS: Win 7 driver: Catalyst 14.4 settings: --kernel x11mod -w 256 -I 15 -g 2 --gpu-memclock 1500 --gpu-engine 1080 --lookup-gap 2 --thread-concurrency 8192 voltage: 1.13 pulls 760W at the wall. Only problem: I had to upgrade to Catalyst 14.4, since it did not work with the modified 13.1 I used to run 5 GPUs under Win7. So only 4 GPUs are detected now. Fifth one shows up with 'error 43' in system manager. Is there any way to run 5 GPUs with this x11 miner on WIN7? Suggested driver Version? Thanks a ton!
|
|
|
|
ozzy1926
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:00:31 PM |
|
which coin should we mine with this minerto make profit?DRK difficulty sky rockets
I just let it run on www.coinmine.pw ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) does this web site convert each coin into btc or do you manually convert ?
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:08:02 PM |
|
Great! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Getting 3.1 MHash/s each with 4* Sapphire Radeon 7970 on GA-990FXA-UD5 OS: Win 7 driver: Catalyst 14.4 settings: --kernel x11mod -w 256 -I 15 -g 2 --gpu-memclock 1500 --gpu-engine 1080 --lookup-gap 2 --thread-concurrency 8192 voltage: 1.13 pulls 760W at the wall. Only problem: I had to upgrade to Catalyst 14.4, since it did not work with the modified 13.1 I used to run 5 GPUs under Win7. So only 4 GPUs are detected now. Fifth one shows up with 'error 43' in system manager. Is there any way to run 5 GPUs with this x11 miner on WIN7? Suggested driver Version? Thanks a ton!I would like a link to this modified driver see if I can find what was changed between the original and the modified one.
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
lewisc46
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:09:49 PM |
|
User magro on reddit posted this script to install on Bamt 1.6 https://github.com/benmagro/Add-SGminer-X11Mod-Miner-To-BAMT/Installs and works fine except I'm not getting temperatures or fan speeds showing up in sgminer. Any ideas for a fix? Had the same problem when I tried to build myself. BTW getting 6.0mhs from 2 x Sapphire Vapor X 280x, 335w at the wall. Using 280x config from OP, best I could get out of sgminer-sph was 4.4mhs, 36% increase, nice! You need to copy the adl header files into the ADL_SDK folder before compiling to see tempuratures Thanks. Got it working. If anyone else is having the same problem - I altered x11.sh script too look like this. ... cd /opt/miners/sgminer-x11mod cp /opt/miners/sgminer-4.1.0-sph/ADL_SDK/* /opt/miners/sgminer-x11mod/ADL_SDK/ make clean ...
Also edited the conf file made by the script rather than deleting and copying over another one. Script worked, modified bamt.conf, copied my sgminer-sph.conf to sgminer-x11mod.conf, changed kernel to "x11mod" - runs but get loads of HW errors and half the hashrate. Here's the sgminer-x11mod.conf, pair of 270s and a 6870: "auto-fan": true, "gpu-fan": "40-70", "temp-cutoff": "85", "temp-overheat": "80", "temp-target": "75",
"gpu-engine": "975,975,900", "gpu-memclock": "1250,1250,1100",
"worksize": "256,256,64", "intensity": "13,13,14", "thread-concurrency": "6336,6336,3366", "gpu-threads": "2,2,2", "gpu-powertune": "20,20,0", "lookup-gap": "2,2,2",
"api-port": "4028", "api-listen": true, "api-allow": "W:127.0.0.1",
"failover-only" : true, "no-pool-disable": true, "no-submit-stale" : true,
"queue": "0", "expiry": "1", "scan-time": "1", "kernel" : "x11mod", "kernel-path": "/usr/local/bin"
did you get this sorted ? i'm hagin a similar issue
|
|
|
|
Eastwind
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:11:04 PM |
|
Great! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Getting 3.1 MHash/s each with 4* Sapphire Radeon 7970 on GA-990FXA-UD5 OS: Win 7 driver: Catalyst 14.4 settings: --kernel x11mod -w 256 -I 15 -g 2 --gpu-memclock 1500 --gpu-engine 1080 --lookup-gap 2 --thread-concurrency 8192 voltage: 1.13 pulls 760W at the wall. Only problem: I had to upgrade to Catalyst 14.4, since it did not work with the modified 13.1 I used to run 5 GPUs under Win7. So only 4 GPUs are detected now. Fifth one shows up with 'error 43' in system manager. Is there any way to run 5 GPUs with this x11 miner on WIN7? Suggested driver Version? Thanks a ton!You can use the 14.4 or 13.12 mod version, https://litecointalk.org/index.php?topic=11761.0
|
|
|
|
JPS2K5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:14:03 PM |
|
which coin should we mine with this minerto make profit?DRK difficulty sky rockets
I just let it run on www.coinmine.pw ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) does this web site convert each coin into btc or do you manually convert ? You can do auto-payout to Cryptsy for example, and do auto-sell there. It's a nice pool, nice guy too. Wrote his own code and algo to calculate profits compared to btc. Seems to work nicely.
|
|
|
|
SavageWS6
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 99
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:22:19 PM |
|
Got my 280X @ 3.358MH/s and my 3x 270's at 2.035MH/s each. Been stable so far. Temps went up a tad bit but nothing alarming my side
|
BTC: 1NLNtXmdLVhS25xMk2neh2viHPDHEfdrGZ MYR: MQvEmxAhAhdN5rfmJsChJ3mN8CUEs9iCn6
|
|
|
bullus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 08:34:54 PM |
|
Great! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Getting 3.1 MHash/s each with 4* Sapphire Radeon 7970 on GA-990FXA-UD5 OS: Win 7 driver: Catalyst 14.4 settings: --kernel x11mod -w 256 -I 15 -g 2 --gpu-memclock 1500 --gpu-engine 1080 --lookup-gap 2 --thread-concurrency 8192 voltage: 1.13 pulls 760W at the wall. Only problem: I had to upgrade to Catalyst 14.4, since it did not work with the modified 13.1 I used to run 5 GPUs under Win7. So only 4 GPUs are detected now. Fifth one shows up with 'error 43' in system manager. Is there any way to run 5 GPUs with this x11 miner on WIN7? Suggested driver Version? Thanks a ton!I used also the 5gpus drivers and now i'm using cat.14.4 and had no problems with Win8.1, maybe try win8.1
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 09:17:31 PM Last edit: May 27, 2014, 10:45:09 PM by thelonecrouton |
|
User magro on reddit posted this script to install on Bamt 1.6 https://github.com/benmagro/Add-SGminer-X11Mod-Miner-To-BAMT/Installs and works fine except I'm not getting temperatures or fan speeds showing up in sgminer. Any ideas for a fix? Had the same problem when I tried to build myself. BTW getting 6.0mhs from 2 x Sapphire Vapor X 280x, 335w at the wall. Using 280x config from OP, best I could get out of sgminer-sph was 4.4mhs, 36% increase, nice! You need to copy the adl header files into the ADL_SDK folder before compiling to see tempuratures Thanks. Got it working. If anyone else is having the same problem - I altered x11.sh script too look like this. ... cd /opt/miners/sgminer-x11mod cp /opt/miners/sgminer-4.1.0-sph/ADL_SDK/* /opt/miners/sgminer-x11mod/ADL_SDK/ make clean ...
Also edited the conf file made by the script rather than deleting and copying over another one. Script worked, modified bamt.conf, copied my sgminer-sph.conf to sgminer-x11mod.conf, changed kernel to "x11mod" - runs but get loads of HW errors and half the hashrate. Here's the sgminer-x11mod.conf, pair of 270s and a 6870: "auto-fan": true, "gpu-fan": "40-70", "temp-cutoff": "85", "temp-overheat": "80", "temp-target": "75",
"gpu-engine": "975,975,900", "gpu-memclock": "1250,1250,1100",
"worksize": "256,256,64", "intensity": "13,13,14", "thread-concurrency": "6336,6336,3366", "gpu-threads": "2,2,2", "gpu-powertune": "20,20,0", "lookup-gap": "2,2,2",
"api-port": "4028", "api-listen": true, "api-allow": "W:127.0.0.1",
"failover-only" : true, "no-pool-disable": true, "no-submit-stale" : true,
"queue": "0", "expiry": "1", "scan-time": "1", "kernel" : "x11mod", "kernel-path": "/usr/local/bin"
did you get this sorted ? i'm hagin a similar issue Not yet, spent afternoon buying cheap DRK off ADD fools. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Going to have a play with it now. edit: pilot error, surprise surprise - I left sgminer-sph flagged '1' in bamt.conf, so I think it was trying to run sgminer-sph and sgminer-x11mod at the same time, with obviously shitty results. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) Took out the 6870 in rig mentioned above while I faff, because I am easily confused, but all 11 of my 270s are now up from 1.2Mh to 1.5MH with my very conservative settings, so about 25% increase, and it seems to be reflected on my DRK p2pool node. Will tinker some more tomorrow.
|
|
|
|
Wolf_Pack
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 09:18:37 PM |
|
I'm still tweaking, but here are my settings for a Powercolor 280x and Gigabyte 270. - Windows 7 Pro
- Catalyst 13.12
My speed is only showing at 4,054 on ipominer.com I'm open to some suggestions from more knowledgeable people. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) "auto-fan" : true, "temp-cutoff" : "85,85", "temp-target" : "73,75", "gpu-fan" : "30-78,75-100", "xintensity" : "512,512", "vectors" : "1,1", "worksize" : "256,128", "lookup-gap" : "2", "thread-concurrency" : "10240,5121", "shaders" : "0,1280", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-threads" : "2,2", "gpu-platform" : "0", "gpu-engine" : "1070,1200", "gpu-memclock" : "1500,1500", "gpu-powertune" : "20,20", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "shares" : "0", "kernel-path" : "/usr/local/bin", "kernel" : "x11mod" sgminer 4.1.0 - Started: [2014-05-27 16:09:19] -------------------------------------------------------------------------------- (5s):5.272M (avg):5.329Mh/s | A:5 R:0 HW:0 WU:0.073/m ST: 2 SS: 0 NB: 154 LW: 6694 GF: 0 RF: 0 Connected to Pool 0 (stratum) diff 0.004 as user Wolf_Pack.mayhem Block: daf9351e... Diff:104 Started: [17:14:24] Best share: 1.815 -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 70.0C 1429RPM | 3.121M/3.123Mh/s | R: 3.2% HW:0 WU:0.044/m xI:512 GPU 1: 68.0C 2375RPM | 2.204M/2.205Mh/s | R: 2.8% HW:0 WU:0.029/m xI:512 -------------------------------------------------------------------------------- [17:15:10] Accepted 356389f5 Diff 0.019/0.004 GPU 0 [17:15:12] Accepted e06ed784 Diff 0.004/0.004 GPU 0 [17:15:14] Accepted 15c76504 Diff 0.046/0.004 GPU 1 [17:15:20] Accepted dbace098 Diff 0.005/0.004 GPU 0 [17:15:24] Accepted 6070599f Diff 0.010/0.004 GPU 0 [17:15:27] Accepted b6be026c Diff 0.005/0.004 GPU 0 [17:15:28] Accepted 65fe1baf Diff 0.010/0.004 GPU 0 [17:15:34] Accepted 88ae79ff Diff 0.007/0.004 GPU 1 [17:15:37] Accepted 3174bc8a Diff 0.020/0.004 GPU 0
|
|
|
|
actudoran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2014, 09:25:37 PM |
|
can someone please explain me how to get this onto my smos 1.3 ? thank you ! Al
|
|
|
|
|