[XCR] Crypti | Dapps | Sidechains | Dapp Store | OPEN SOURCE | 100% own code | DPoS

[dzarmush]

For some reason I can't start forging with my delegate http://cryptichain.me/address/16830306810015698616C. It says: "Accesss denied.". Or the forging option is not available because I'm not among 101 delegates yet?

I also tried to enable forging with changing config.json, but after I changed it I wasn't able to start app.js again. My node just stopped. I had to re-install Crypti in order to start it.

What does it say on your ACCOUNT page, at the top?

It should list delegate status after the balance.  You may be trying to enable forging when you have already done so.  

You need to enable forging, even though you are not in the 101 club, so that when you are elevated, you forge immediatly.

Now it shows Stop Forging button, after I fixed config.json.

[dzarmush]

How does it count uptime? My Vultr server is running (104.207.155.106), forging is enabled, but I see 0% uptime.

[GreXX]

How does it count uptime? My Vultr server is running (104.207.155.106), forging is enabled, but I see 0% uptime.

Uptime will only be calculated AFTER you become one of the 101 active delegates and it is based on how many of your assigned blocks you forged. So if you are an Active Delegate and during a round, you miss your assigned block, then your uptime % will go down a bit.

[dzarmush]

How does it count uptime? My Vultr server is running (104.207.155.106), forging is enabled, but I see 0% uptime.

Uptime will only be calculated AFTER you become one of the 101 active delegates and it is based on how many of your assigned blocks you forged. So if you are an Active Delegate and during a round, you miss your assigned block, then your uptime % will go down a bit.

Some standby delegates have calculated uptime because they were active delegates before?

[Litoshi]

How does it count uptime? My Vultr server is running (104.207.155.106), forging is enabled, but I see 0% uptime.

Uptime will only be calculated AFTER you become one of the 101 active delegates and it is based on how many of your assigned blocks you forged. So if you are an Active Delegate and during a round, you miss your assigned block, then your uptime % will go down a bit.

Some standby delegates have calculated uptime because they were active delegates before?

yes

[dzarmush]

When I enter my account from wallet.crypti.me I see green "Start Forging" button. When I enter my account from my server 104.207.155.106:8040 I see red "Stop Forging" button.

[Litoshi]

When I enter my account from wallet.crypti.me I see green "Start Forging" button. When I enter my account from my server 104.207.155.106:8040 I see red "Stop Forging" button.

You cannot use the web wallet for forging from that server.  You need to enable forging from the server that is hosting your delegate.

The web wallet should not even be showing the ENABLE FORGING button. But it shows, becuz  It is the same version as the public wallets, without any alterations.

[GreXX]

When I enter my account from wallet.crypti.me I see green "Start Forging" button. When I enter my account from my server 104.207.155.106:8040 I see red "Stop Forging" button.

You cannot use the web wallet for forging from that server.  You need to enable forging from the server that is hosting your delegate.

The web wallet should not even be showing the ENABLE FORGING button. But it shows, becuz  It is the same version as the public wallets, without any alterations.

In all reality the web wallet should probably be switched to a lite wallet. As far as I know, you can only enable or disable forging on nodes where you are logged in locally or where you have set the delegate address for the node in the config files.

[Passion_ltc]

Just one suggestion, with regards to the UI Design. It seems like you guys are using a generic typeface, it seems like either Arial, or Helevetica Nueue.

Id personally suggest either using Montserrat or Proxima Nova, both are terrific typefaces which suit just about any design. Once integrated, you'll realize how good they actually look.

Montserrat (free through Google Fonts) : https://www.google.com/fonts/specimen/Montserrat



Proxima Nova (paid through TypeKit) : https://typekit.com/fonts/proxima-nova

We are using Roboto, like the google material design guideline suggests. It's the most typical font for material design and already used at http://crypti.me


Check it out: http://www.google.com/design/spec/style/typography.html#typography-typeface

[Passion_ltc]

When I enter my account from wallet.crypti.me I see green "Start Forging" button. When I enter my account from my server 104.207.155.106:8040 I see red "Stop Forging" button.

Additionally, you always forge on a server with an account. If you login on another server with the same account, you don't forge there. It's important to only forge on one server, to prevent forks.

[toThemJoy]

Just one suggestion, with regards to the UI Design. It seems like you guys are using a generic typeface, it seems like either Arial, or Helevetica Nueue.

Id personally suggest either using Montserrat or Proxima Nova, both are terrific typefaces which suit just about any design. Once integrated, you'll realize how good they actually look.

Montserrat (free through Google Fonts) : https://www.google.com/fonts/specimen/Montserrat



Proxima Nova (paid through TypeKit) : https://typekit.com/fonts/proxima-nova

We are using Roboto, like the google material design guideline suggests. It's the most typical font for material design and already used at http://crypti.me


Check it out: http://www.google.com/design/spec/style/typography.html#typography-typeface

But please check your fonts in the blog section they differ from the rest of the site.
While you are using sans-serif; style on the site, the blog menus are all in serif; fonts.

[Passion_ltc]

Just one suggestion, with regards to the UI Design. It seems like you guys are using a generic typeface, it seems like either Arial, or Helevetica Nueue.

Id personally suggest either using Montserrat or Proxima Nova, both are terrific typefaces which suit just about any design. Once integrated, you'll realize how good they actually look.

Montserrat (free through Google Fonts) : https://www.google.com/fonts/specimen/Montserrat



Proxima Nova (paid through TypeKit) : https://typekit.com/fonts/proxima-nova

We are using Roboto, like the google material design guideline suggests. It's the most typical font for material design and already used at http://crypti.me


Check it out: http://www.google.com/design/spec/style/typography.html#typography-typeface

But please check your fonts in the blog section they differ from the rest of the site.
While you are using sans-serif; style on the site, the blog menus are all in serif; fonts.

We will take a look. Thank you.

[dzarmush]

Alright, so here's my delegate dzarmush: http://cryptichain.me/address/16830306810015698616C

Server
I'm running $5 Vultr server in Los Angeles. IP: 104.207.155.106.

Me
I'm a long term investor with a lot of trust for Crypti. It is in my best interest to help keeping the network as strong as possible since I'm almost all-in, speaking in poker terms. I also brought several other people into Crypti.

Please vote for me and I'll do my best.

I'll make a topic on Crypti forum as well when it's up.

[Wulfcastle]

Alright, so here's my delegate dzarmush: http://cryptichain.me/address/16830306810015698616C

Server
I'm running $5 Vultr server in Los Angeles. IP: 104.207.155.106.

Me
I'm a long term investor with a lot of trust for Crypti. It is in my best interest to help keeping the network as strong as possible since I'm almost all-in, speaking in poker terms. I also brought several other people into Crypti.

Please vote for me and I'll do my best.

I'll make a topic on Crypti forum as well when it's up.

Voted

[Passion_ltc]

Alright, so here's my delegate dzarmush: http://cryptichain.me/address/16830306810015698616C

Server
I'm running $5 Vultr server in Los Angeles. IP: 104.207.155.106.

Me
I'm a long term investor with a lot of trust for Crypti. It is in my best interest to help keeping the network as strong as possible since I'm almost all-in, speaking in poker terms. I also brought several other people into Crypti.

Please vote for me and I'll do my best.

I'll make a topic on Crypti forum as well when it's up.

Voted

I will vote for you once you have made a thread.

[dzarmush]

I'll make a topic on Crypti forum as well when it's up.

My bad. There was an old url in my bookmarks )

Here's my delegate thread: http://forum.crypti.me/viewtopic.php?f=17&t=73

[Passion_ltc]

Just one suggestion, with regards to the UI Design. It seems like you guys are using a generic typeface, it seems like either Arial, or Helevetica Nueue.

Id personally suggest either using Montserrat or Proxima Nova, both are terrific typefaces which suit just about any design. Once integrated, you'll realize how good they actually look.

Montserrat (free through Google Fonts) : https://www.google.com/fonts/specimen/Montserrat

Proxima Nova (paid through TypeKit) : https://typekit.com/fonts/proxima-nova

We are using Roboto, like the google material design guideline suggests. It's the most typical font for material design and already used at http://crypti.me


Check it out: http://www.google.com/design/spec/style/typography.html#typography-typeface

But please check your fonts in the blog section they differ from the rest of the site.
While you are using sans-serif; style on the site, the blog menus are all in serif; fonts.

We will take a look. Thank you.

We took a look, for us it's working. Which OS do you use? Which browser? Which native OS language?




Edit: We may have found the issue.

[pabloangello]

FEE UPDATE / REMINDER

We have now hit block 114,000 and all fees have transitioned to their new values!!

The fees are now as follows:

Delegate Registration: 100 XCR (down from 10,000)

Second Passphrase Registration: 5 XCR (down from 100)

That's huge change. What is the reasoning of this?

[Litoshi]

FEE UPDATE / REMINDER

We have now hit block 114,000 and all fees have transitioned to their new values!!

The fees are now as follows:

Delegate Registration: 100 XCR (down from 10,000)

Second Passphrase Registration: 5 XCR (down from 100)

That's huge change. What is the reasoning of this?

We are sensitive to community input and after discussions internally, we adopt the ideas that we feel best contribute to the success of XCR.

[MalReynolds]

FEE UPDATE / REMINDER

We have now hit block 114,000 and all fees have transitioned to their new values!!

The fees are now as follows:

Delegate Registration: 100 XCR (down from 10,000)

Second Passphrase Registration: 5 XCR (down from 100)

That's huge change. What is the reasoning of this?

Simple.  Don't demand high fees from the very people you are asking to support your DPoS network forever with money out of their own pocket.  And don't discourage better security with high fees.