heslo
Legendary
Offline
Activity: 1197
Merit: 1126
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 01:25:54 PM |
|
I wish the Antminer monitor program worked but for some reason it gives a .net error.
This is because you're running the new firmware. Re-flash the older firmware and it will work again (you will lose the web GUI overclocking support)
|
|
|
|
eoakland
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 01:39:28 PM |
|
I am curious has anyone had any RMA issues with Bitmain ? i have provided them with the order ID and I am still having the hardest time getting RMA information from them. They have demanded I perform a test with something called a multimeter (which i do not own, i had to go purchase one) so i could test the chains. My s3 device pretty much bricked itself with a firmware upgrade. I cannot access the UI, the ip is not found (never changed from default). I used an ipsniffer, and still zilch....anyhow, i am curious to know how Bitmain has dealt with RMA requests from others. Thanks
It took me 2 1/2 weeks of those emails back and fourth. I finally told them I would sell it for parts on Bitcointalk.org and tell everyone about them not honoring warranty. Then and only then did they sent a RMA form. I sent it(controller) off 3 weeks ago and still don't have a replacement. Good luck. What were your failure symptoms? I had one die today.. going to have to go down this road... If somebody in Europe/France does have the same trouble, I'd be happy to have a look and try to unbrick it if Bitmain doesn't accept RMA. Looks like unbricking could be done by serial line programming (easier) or JTAG if serial doesn't work (will have to find the solder points). Both methods will require soldering and will void your warranty. Also, what are the tests asked by Bimaintech? Bitmain has demanded that i perform a multimeter test on the two chains (6 pin atx plug ports). i told them i do not own a multimeter, but none the less i went ahead and purchased one. i am really not sure why their own RMA department will not test the RMA, is it not their job to find the fault ? I am still waiting for Bitmain to send me RMA info. The last communication i had with someone by the name of "Tim" stated "Hi there, Should there be a carrier tracking number showing that this miner came from our factory, we can also provide RMA for your faulty parts." Not really sure why they rely on carrier information; why do they need to find a carrier tracking number to prove my purchase when i have already given them my order id number ? my s3 has just been sitting collecting dust for a couple of weeks now. Thanks BITMAIN If anyone has had similar issues with an s3 and has managed to solve the riddle please let me know how. thanks
|
|
|
|
IYFTech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 01:39:46 PM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ? One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation. Indeed, I saw your post requesting access to the code - ignoring it seems a very strange course of action by Bitmain, especially since agreeing & cooperating would not only benefit everyone - but would also stay within the legally binding license terms....... I hope they realize their error & do the right thing - as well as live up to their claim of supporting the Bitcoin community. @ckolivas: Is there anything we, the community, can do to help? Maybe if we all started mailing them they will take notice? Hmmmm.......Sorry to quote myself, but the more I think about this - the more it doesn't make any sense. in fact, it smells. Apart from the obvious legal obligations pointed out by ckolivas, one of the hardest working & well respected Bitcoin community members there is, I find myself wondering why on earth Bitmain won't release their code - are they trying to hide something? I mean, the third party redirect fix was a very important update - why on earth would Bitmain not want to implement it? There are also a multitude of other fixes & improvements which Kano (where is he by the way?) listed in a previous post regarding the S2, but are still relevent: Because: 1) The version in there throws away valid blocks on p2pool 2) The version in there doesn't block the recent stratum redirect problem 3) The version in there passes all shares to the pool even if they are below target (I'm sure pools must hate the S2 due to the major increase in CPU requirements at the pool) 4) The version in there has the API set to W:0/0 so anyone with network access can change your settings/pool/username (and the web page doesn't let you fix that) 5) The version in there has a modified API with different field names to the standard API so anyone using other software that reads the API must get that software changed (or use a proper API version of cgminer in the S2 ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ) . . . By not cooperating with the cgminer devs request to release the code as they are legally bound to do - and not updating cgminer to incorporate the very important security fixes, Bitmain are not only breaking the law - but they are also arousing suspicion amongst the Bitcoin community as to why they are refusing to do so. For a company that claims to respect & care deeply for the Bitcoin community, this makes no sense to me whatsoever. Before anyone starts breaking my balls accusing me of stirring things up trying to discredit Bitmain - I am a customer who has Bitmain hardware & am quite happy with it. I am merely pointing out the legally binding obligations Bitmain are ignoring, as well as trying to highlight the contempt that Bitmain are showing towards ckolivas & kano - without who, mining & Bitcoin would not be what it is today. We, as a community owe it to the cgminer devs to make sure that all hardware manufacturers respect their requests to release their code as stated in the open source license agreement. If they refuse - we should all be concerned as to the reasons why. Sorry to ramble, but I'm a great believer in Open Source & what the cgminer devs have done, and continue to do. We owe them ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
PatMan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 01:48:04 PM Last edit: August 16, 2014, 02:09:23 PM by PatMan |
|
+100!!I agree completely ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) You deserve a smoke ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) EDIT: @IYFTech - can you post this in other Bitmain threads? Maybe they will take notice?
|
|
|
|
xhomerx10
Legendary
Offline
Activity: 3948
Merit: 8522
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 02:21:13 PM |
|
4 units (batch 1, first ~15min) arrived today and setup was a breeze.
gorgeous case, makes it feel like a solid consumer-grade product compared to the S1.
miner 1: 237.5MHz 477GH (2.5hrs) miner 2: 225MHz 417GH (2hrs) miner 3: 225MHz 450GH (2hrs) miner 2: 225MHz 413GH (2hrs)
so far overclocking is a total grab-bag. looks like 2 of the miners lose hashrate at even a slight overclock, and the other has negligible improvement over stock. miner 1 will go for 250mhz tomorrow
I havent seen the invoice yet, but presumably it was about $400 CAD to import and receive all 4 miners.
Was that $400 just for the HST or did you have to pay duty on the equipment as well?
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8452
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 02:40:42 PM |
|
Hashrate - 5min:513.11G / 30min:493.11G / 1hr:487.73G O Is that alright for 237M?
487 for 237 is fine. check it in about 1 day
|
|
|
|
IYFTech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 02:54:27 PM |
|
+100!!I agree completely ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) You deserve a smoke ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) EDIT: @IYFTech - can you post this in other Bitmain threads? Maybe they will take notice? Certainly - good idea. Thanks, just skinned up a fat one ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Waiting for my inbox to fill up with Bitmain hate mail........ ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
macgyver007
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 105
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 03:08:23 PM Last edit: August 16, 2014, 03:36:51 PM by macgyver007 |
|
+ 100000000 IYFTech very well said It boggles the mind how a company can blatantly ignore the law and the fact they would have no cgminer if not for CK and Kano, not to mention the fact that the existing 3.12 cgminer in its present BITMAIN state has some glaring security holes which NEED to be fixed, including other bugs that have been mentioned... network access needs to be locked down for starters... the redirect issue is a big problem (not for bitmain....are they the ones redirecting everyones miners??? hmmmmm why not fix this otherwise and ignore it) The S2 software has been all but abandoned...the lack of quality firmware speaks for itself...how long did it take bitmain to fix the miner password issue ...and none of the issues Kano mentioned were ever addressed ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
Sorry but from a logical standpoint WHY IS BITMAIN IGNORING THESE ISSUES....hmmmmmmm ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I for one have become very suspicious in light of all of this This makes absolutely no sense especially considering how much the cgminer devs have gone out of their way to try and help the community and even in this thread have asked BITMAIN TO COMPLY WITH THE LAW...which is really THE LAW not a request...no company is above the law and to be honest it really disgusts me that the only posts by BITMAIN in here are to pimp their hardware and NEVER to answer the customers requests...I have asked for the unreleased july 28 firmware with no response...as have others... We have rights as customers and companies have laws they must abide by....this isn't the wild west...if it was I am sure BITMAIN would be lynched by now for their business practices of late.....abysmal really
|
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 03:16:23 PM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ? One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation. Indeed, I saw your post requesting access to the code - ignoring it seems a very strange course of action by Bitmain, especially since agreeing & cooperating would not only benefit everyone - but would also stay within the legally binding license terms....... I hope they realize their error & do the right thing - as well as live up to their claim of supporting the Bitcoin community. @ckolivas: Is there anything we, the community, can do to help? Maybe if we all started mailing them they will take notice? Hmmmm.......Sorry to quote myself, but the more I think about this - the more it doesn't make any sense. in fact, it smells. Apart from the obvious legal obligations pointed out by ckolivas, one of the hardest working & well respected Bitcoin community members there is, I find myself wondering why on earth Bitmain won't release their code - are they trying to hide something? I mean, the third party redirect fix was a very important update - why on earth would Bitmain not want to implement it? There are also a multitude of other fixes & improvements which Kano (where is he by the way?) listed in a previous post regarding the S2, but are still relevent: Because: 1) The version in there throws away valid blocks on p2pool 2) The version in there doesn't block the recent stratum redirect problem 3) The version in there passes all shares to the pool even if they are below target (I'm sure pools must hate the S2 due to the major increase in CPU requirements at the pool) 4) The version in there has the API set to W:0/0 so anyone with network access can change your settings/pool/username (and the web page doesn't let you fix that) 5) The version in there has a modified API with different field names to the standard API so anyone using other software that reads the API must get that software changed (or use a proper API version of cgminer in the S2 ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ) . . . By not cooperating with the cgminer devs request to release the code as they are legally bound to do - and not updating cgminer to incorporate the very important security fixes, Bitmain are not only breaking the law - but they are also arousing suspicion amongst the Bitcoin community as to why they are refusing to do so. For a company that claims to respect & care deeply for the Bitcoin community, this makes no sense to me whatsoever. Before anyone starts breaking my balls accusing me of stirring things up trying to discredit Bitmain - I am a customer who has Bitmain hardware & am quite happy with it. I am merely pointing out the legally binding obligations Bitmain are ignoring, as well as trying to highlight the contempt that Bitmain are showing towards ckolivas & kano - without who, mining & Bitcoin would not be what it is today. We, as a community owe it to the cgminer devs to make sure that all hardware manufacturers respect their requests to release their code as stated in the open source license agreement. If they refuse - we should all be concerned as to the reasons why. Sorry to ramble, but I'm a great believer in Open Source & what the cgminer devs have done, and continue to do. We owe them ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Ever since I read ckolivas' post regarding his request to Bitmain, I started thinking along the same train of thought that you just expressed (even bordering on paranoia ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ). I'd hate to think that some nefarious chit has been added to the code.
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 03:20:49 PM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ? One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation. Indeed, I saw your post requesting access to the code - ignoring it seems a very strange course of action by Bitmain, especially since agreeing & cooperating would not only benefit everyone - but would also stay within the legally binding license terms....... I hope they realize their error & do the right thing - as well as live up to their claim of supporting the Bitcoin community. @ckolivas: Is there anything we, the community, can do to help? Maybe if we all started mailing them they will take notice? Hmmmm.......Sorry to quote myself, but the more I think about this - the more it doesn't make any sense. in fact, it smells. Apart from the obvious legal obligations pointed out by ckolivas, one of the hardest working & well respected Bitcoin community members there is, I find myself wondering why on earth Bitmain won't release their code - are they trying to hide something? I mean, the third party redirect fix was a very important update - why on earth would Bitmain not want to implement it? There are also a multitude of other fixes & improvements which Kano (where is he by the way?) listed in a previous post regarding the S2, but are still relevent: Because: 1) The version in there throws away valid blocks on p2pool 2) The version in there doesn't block the recent stratum redirect problem 3) The version in there passes all shares to the pool even if they are below target (I'm sure pools must hate the S2 due to the major increase in CPU requirements at the pool) 4) The version in there has the API set to W:0/0 so anyone with network access can change your settings/pool/username (and the web page doesn't let you fix that) 5) The version in there has a modified API with different field names to the standard API so anyone using other software that reads the API must get that software changed (or use a proper API version of cgminer in the S2 ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ) . . . By not cooperating with the cgminer devs request to release the code as they are legally bound to do - and not updating cgminer to incorporate the very important security fixes, Bitmain are not only breaking the law - but they are also arousing suspicion amongst the Bitcoin community as to why they are refusing to do so. For a company that claims to respect & care deeply for the Bitcoin community, this makes no sense to me whatsoever. Before anyone starts breaking my balls accusing me of stirring things up trying to discredit Bitmain - I am a customer who has Bitmain hardware & am quite happy with it. I am merely pointing out the legally binding obligations Bitmain are ignoring, as well as trying to highlight the contempt that Bitmain are showing towards ckolivas & kano - without who, mining & Bitcoin would not be what it is today. We, as a community owe it to the cgminer devs to make sure that all hardware manufacturers respect their requests to release their code as stated in the open source license agreement. If they refuse - we should all be concerned as to the reasons why. Sorry to ramble, but I'm a great believer in Open Source & what the cgminer devs have done, and continue to do. We owe them ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Ever since I read ckolivas' post regarding his request to Bitmain, I started thinking along the same train of thought that you just expressed (even bordering on paranoia ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ). I'd hate to think that some nefarious chit has been added to the code. what if, say 5 % og your mining is being redirected... from the cgminer app that, aparently no one can see the source code for... some questions indeed....
|
node-vps.com - Tron / Masternode hosting services
|
|
|
bobsag3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 03:34:13 PM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ? One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation. Indeed, I saw your post requesting access to the code - ignoring it seems a very strange course of action by Bitmain, especially since agreeing & cooperating would not only benefit everyone - but would also stay within the legally binding license terms....... I hope they realize their error & do the right thing - as well as live up to their claim of supporting the Bitcoin community. @ckolivas: Is there anything we, the community, can do to help? Maybe if we all started mailing them they will take notice? Hmmmm.......Sorry to quote myself, but the more I think about this - the more it doesn't make any sense. in fact, it smells. Apart from the obvious legal obligations pointed out by ckolivas, one of the hardest working & well respected Bitcoin community members there is, I find myself wondering why on earth Bitmain won't release their code - are they trying to hide something? I mean, the third party redirect fix was a very important update - why on earth would Bitmain not want to implement it? There are also a multitude of other fixes & improvements which Kano (where is he by the way?) listed in a previous post regarding the S2, but are still relevent: Because: 1) The version in there throws away valid blocks on p2pool 2) The version in there doesn't block the recent stratum redirect problem 3) The version in there passes all shares to the pool even if they are below target (I'm sure pools must hate the S2 due to the major increase in CPU requirements at the pool) 4) The version in there has the API set to W:0/0 so anyone with network access can change your settings/pool/username (and the web page doesn't let you fix that) 5) The version in there has a modified API with different field names to the standard API so anyone using other software that reads the API must get that software changed (or use a proper API version of cgminer in the S2 ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) ) . . . By not cooperating with the cgminer devs request to release the code as they are legally bound to do - and not updating cgminer to incorporate the very important security fixes, Bitmain are not only breaking the law - but they are also arousing suspicion amongst the Bitcoin community as to why they are refusing to do so. For a company that claims to respect & care deeply for the Bitcoin community, this makes no sense to me whatsoever. Before anyone starts breaking my balls accusing me of stirring things up trying to discredit Bitmain - I am a customer who has Bitmain hardware & am quite happy with it. I am merely pointing out the legally binding obligations Bitmain are ignoring, as well as trying to highlight the contempt that Bitmain are showing towards ckolivas & kano - without who, mining & Bitcoin would not be what it is today. We, as a community owe it to the cgminer devs to make sure that all hardware manufacturers respect their requests to release their code as stated in the open source license agreement. If they refuse - we should all be concerned as to the reasons why. Sorry to ramble, but I'm a great believer in Open Source & what the cgminer devs have done, and continue to do. We owe them ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) +1 Here. I have been asking/badgering their reps in person for the last few months about this, nothing but BS answers to be honest.
|
|
|
|
tom99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 03:47:17 PM |
|
4 units (batch 1, first ~15min) arrived today and setup was a breeze.
gorgeous case, makes it feel like a solid consumer-grade product compared to the S1.
miner 1: 237.5MHz 477GH (2.5hrs) miner 2: 225MHz 417GH (2hrs) miner 3: 225MHz 450GH (2hrs) miner 2: 225MHz 413GH (2hrs)
so far overclocking is a total grab-bag. looks like 2 of the miners lose hashrate at even a slight overclock, and the other has negligible improvement over stock. miner 1 will go for 250mhz tomorrow
I havent seen the invoice yet, but presumably it was about $400 CAD to import and receive all 4 miners.
Was that $400 just for the HST or did you have to pay duty on the equipment as well? I got mine of 4xS3 B6 were shipping by UPS for 229.00 (GST+10.00 Brok fee)
|
|
|
|
macgyver007
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 105
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
August 16, 2014, 03:54:11 PM |
|
BITMAIN claims it is the dc/dc converters which cause the drop in hashrate ...the symptoms of lack of inadequate voltage should manifest as malfunctioning chips in the form of x or - in the GUI...strangely on my miners which the hashrate drops I see nothing of the sort...in fact not even hardware errors....BUT the hashrate is still vanishing by the hour...where is it going and why? If it is really the dc/dc converters then why does changing the controller board affect mining speed (I thought the dc/dc converters they refer to are on the blades?) I for one am looking for answers...and BITMAIN is just giving everyone the run around...from the start of the S3..first by announcing a product which did not even meet the advertised spec...then by offering a "discount" which is far less than the expected return in the long run (how does a 1 time 10% discount compensate for a continual 10% decrease in output) and rushing to deliver garbage to the customers which was so poorly designed that they had a fire sale on all the badly designed boards and call it S3+
Something really smells here....and I don't like it at all
|
|
|
|
martijntje
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 04:09:18 PM |
|
Talking about cgminer redirects, does anyone know who unknown.servercentral.net comes from? My S3 seems to be connected to it. Can't place it to any of the pools I use (slush and btcguild).
|
|
|
|
tom99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 04:23:17 PM |
|
Talking about cgminer redirects, does anyone know who unknown.servercentral.net comes from? My S3 seems to be connected to it. Can't place it to any of the pools I use (slush and btcguild).
look like DNS thing 50.31.189.49 unknown.servercentral.net IP Address Information The Internet Service Provider (ISP) that owns the network address of 50.31.189.49 is Server Central Network and located in Illinois within the United States. The IP Address resolves to the DNS record of unknown.servercentral.net. Network Communications The following file have been seen to comunicate with this IP address in live environments. TCP port 3333 cgminer.exe
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 04:24:06 PM |
|
Regarding Bitmain's lack of compliance with the GPL, my guess is that has more to do with lack of resources, messed up priorities, or just plain incompetence. I doubt there's any sinister intent on their part.
That having been said, they must make the time to comply with the licensing and make the source code available. No question.
Maybe they would make it a priority if everyone reading this thread wrote to Bitmain support asking for when they plan to be compliant and provide the source?
I'm going to write to them right now...
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
martijntje
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 04:34:29 PM |
|
Talking about cgminer redirects, does anyone know who unknown.servercentral.net comes from? My S3 seems to be connected to it. Can't place it to any of the pools I use (slush and btcguild).
look like DNS thing 50.31.189.49 unknown.servercentral.net IP Address Information The Internet Service Provider (ISP) that owns the network address of 50.31.189.49 is Server Central Network and located in Illinois within the United States. The IP Address resolves to the DNS record of unknown.servercentral.net. Network Communications The following file have been seen to comunicate with this IP address in live environments. TCP port 3333 cgminer.exe I looked up that information too, which does not really give me any clue as to which pool it belongs. It connects on port 3333 so it really seems to be something to do with mining.
|
|
|
|
tom99
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 04:38:44 PM |
|
Talking about cgminer redirects, does anyone know who unknown.servercentral.net comes from? My S3 seems to be connected to it. Can't place it to any of the pools I use (slush and btcguild).
look like DNS thing 50.31.189.49 unknown.servercentral.net IP Address Information The Internet Service Provider (ISP) that owns the network address of 50.31.189.49 is Server Central Network and located in Illinois within the United States. The IP Address resolves to the DNS record of unknown.servercentral.net. Network Communications The following file have been seen to comunicate with this IP address in live environments. TCP port 3333 cgminer.exe I looked up that information too, which does not really give me any clue as to which pool it belongs. It connects on port 3333 so it really seems to be something to do with mining. that ip address wasnt pool but ip is for DNS.
|
|
|
|
IYFTech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 05:21:43 PM |
|
Regarding Bitmain's lack of compliance with the GPL, my guess is that has more to do with lack of resources, messed up priorities, or just plain incompetence. I doubt there's any sinister intent on their part.
That having been said, they must make the time to comply with the licensing and make the source code available. No question.
Maybe they would make it a priority if everyone reading this thread wrote to Bitmain support asking for when they plan to be compliant and provide the source?
I'm going to write to them right now...
I hope I haven't started a big shitstorm here, and I also hope the cgminer devs don't think that I'm interfering with their affairs. However, as this absolutely concerns everyone involved in mining & the Open Source community - I felt obliged to voice my opinions. I also wrote an email to Bitmain regarding this when I posted, and I genuinely believe that if the whole Bitcoin & Open Source community got behind the cgminer devs & voiced their concerns to Bitmain in any way possible, both privately & publicly, Bitmain will have no option than to address the situation in a timely and wholly agreeable manner for everyone sooner rather than later. Failure to do so by Bitmain can only leave one possible conclusion - and a nasty legal battle which nobody wants. I suggest everyone help the cgminer devs in any way they can as a show of gratitude for all their work in the Bitcoin mining community. Thanks also to everyone for the kind words on my post - I must admit I was slightly concerned about the reaction it might get, but once again the community has proven to me that there is still a togetherness in existence when the sh*t hits the fan ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
Sector7G
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 16, 2014, 05:54:09 PM |
|
I have a question about the stratum difficulty. I have two Antminer S3s, and I'm using the GHash.IO mining pool. Their FAQ says: The optimal settings of the stratum difficulty depends on your hash-rate: 16+ GH/s - 16 difficulty 32+ Gh/s - 32 difficulty 64+ GH/s - 64 difficulty 128+ GH/s - 128 difficulty 256+ GH/s - 256 difficulty 512+ GH/s - 512 difficulty 1 TH/s - 1024 difficulty So based on that, the setting would be 256 for each miner. Does anyone actually alter this setting in their mining pool? Or do you just keep the default setting? thank you.
|
|
|
|
|