[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Awesome Miner version 6.9

 Awesome Miner Antminer firmware
  - The firmware can be automatically downloaded by selecting it from the list in the Update firmware dialog (toolbar: Tools -> ASIC Tools -> Update firmware)
  - Firmware for Antminer T9+ added (only for T9+, not for T9)
 ASIC mining
  - Chip temperature for Antminer S15 and S17 will always display the highest temperature reading per board
 GPU mining
  - Bulk edit improved to include configuration of Managed Miner property for Administrator Privileges
 Features
  - A new Information column can be added to the list of miners where a number of predefined properties can be included and displayed. Including details from the Awesome Miner Antminer firmware, uptime, pool worker name and more.
  - Create mining pool via context menu for a specific coin on the Coins tab
 User interface
  - NOTE: The built-in web interface will be set to use the new user interface design by default. The Classic user interface can still be enabled via the Options dialog, Web section - but will be discontinued in the future.
  - The coin selection control has been improved and will also allow sorting on either coin name or algorithm name
 Mining software
  - T-Rex miner 0.13.2
  - CryptoDredge 0.21.0
  - Gminer 1.55
  - XmRig CPU 3.0.0
  - Lolminer 0.8.7
  - Miniz Miner 1.5p
  - BMiner 15.8.1
 Corrections
  - Correction to colors for chip status when using the Awesome Miner Antminer firmware
  - Correction for profit switcher for External Miners when using both the new and old Nicehash platform

[1714970216]

1714970216

[1714970216]

1714970216

[1714970216]

1714970216

[NetWhiz]

I need Awesome Miner Remote Agent Installer 6.8.2. When I tried to update the remote agent it would not do it. i then tried manually, but it says it needs the installer to uninstall the installed version (which is 6.8.2) and will not install 6.9 because of it. Can you provide a link to that installer please?

[patrike]

I need Awesome Miner Remote Agent Installer 6.8.2. When I tried to update the remote agent it would not do it. i then tried manually, but it says it needs the installer to uninstall the installed version (which is 6.8.2) and will not install 6.9 because of it. Can you provide a link to that installer please?

Hi,
The Awesome Miner installer is based on the Windows Installer concept, where the uninstallation requires Windows to keep track of the installed software. In case Windows is unable to perform an upgrade or uninstallation, please use this tool from Microsoft to force the removal.
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed

[MoparMiningLLC]

@patrike - AM picked up my FutureBit Apollo miner with ease but its reporting the hash wrong - per pool and gui I am hashing right at 105 mh/s in eco mode - AM shows the miner at 2.74 mh/s

my guess is that it is not picking up all the chips?

note: it is identifying it as a FPGA miner not as an ASIC

[NetWhiz]

Hi,
The Awesome Miner installer is based on the Windows Installer concept, where the uninstallation requires Windows to keep track of the installed software. In case Windows is unable to perform an upgrade or uninstallation, please use this tool from Microsoft to force the removal.
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed

Thanks, that fixed it.

[patrike]

@patrike - AM picked up my FutureBit Apollo miner with ease but its reporting the hash wrong - per pool and gui I am hashing right at 105 mh/s in eco mode - AM shows the miner at 2.74 mh/s

my guess is that it is not picking up all the chips?

note: it is identifying it as a FPGA miner not as an ASIC

Can you please send me the API report via mail or PM for this miner (toolbar: Tools -> API Report)? With this information I can review what the miner is reporting and maybe adjust Awesome Miner a bit based on this.

Most likely this miner is reporting "FPGA" as device type.

[bensam1231]

Hey Patrike, please add SSL support. Some miners with really weird command line parameters need it entered straight into the command line string, such as with miniz. This is pretty important for a lot of different pools.

Thanks.

[MoparMiningLLC]

Can you please send me the API report via mail or PM for this miner (toolbar: Tools -> API Report)? With this information I can review what the miner is reporting and maybe adjust Awesome Miner a bit based on this.

Most likely this miner is reporting "FPGA" as device type.

sent via pm

[joseph32]

Whats the API identifier code for the new Nicehash Beamv2? Just wanted to add it as userdefined, but cant find that damn code 

[STSMiner]

Whats the API identifier code for the new Nicehash Beamv2? Just wanted to add it as userdefined, but cant find that damn code 

45

[joseph32]

Whats the API identifier code for the new Nicehash Beamv2? Just wanted to add it as userdefined, but cant find that damn code 

45

THANKS! 

[patrike]

Hey Patrike, please add SSL support. Some miners with really weird command line parameters need it entered straight into the command line string, such as with miniz. This is pretty important for a lot of different pools.

Thanks.

Good point. For some mining software Awesome Miner do translate URL's like stratum+ssl://somepool... into parameters required for SSL to work. There are however no general concept for this that works across all mining software and it should preferrably just be a checkbox in the Pool Properties.

[patrike]

Can you please send me the API report via mail or PM for this miner (toolbar: Tools -> API Report)? With this information I can review what the miner is reporting and maybe adjust Awesome Miner a bit based on this.

Most likely this miner is reporting "FPGA" as device type.

sent via pm

Thanks for sharing the report. This miner is reporting a hashrate of ~2.4MH/s, which of course is incorrect given that it's actually working at a speed of >100MH/s. I wasn't able to find any details reported by the miner that would make it possible for Awesome Miner to display the true hashrate. I think it's some kind of bug in the firmware for this miner where it reports incorrect hashrate.

[MoparMiningLLC]

Can you please send me the API report via mail or PM for this miner (toolbar: Tools -> API Report)? With this information I can review what the miner is reporting and maybe adjust Awesome Miner a bit based on this.

Most likely this miner is reporting "FPGA" as device type.

sent via pm

Thanks for sharing the report. This miner is reporting a hashrate of ~2.4MH/s, which of course is incorrect given that it's actually working at a speed of >100MH/s. I wasn't able to find any details reported by the miner that would make it possible for Awesome Miner to display the true hashrate. I think it's some kind of bug in the firmware for this miner where it reports incorrect hashrate.

ok I will try and share it back with Futurebit and see what they say.

[Siolim]

Hi Patrike. I'm trying to add data from the exchange, the data is not readable https://open.citex.co.kr/api/v1/common/snapshot/ETH-BTC. Everything works through postman. The exchange answered me "Please add auth key in your header and the others are unchanged.

For example, headers = {'Authorization': auth key}. Your auth key is '5cc57956cbfb ************3479888143e8982d50c7115fa8d4'.

Do they have any protection?

[toptek12]

I was hoping someone else would report it .

my
RTX 2060 super
RTX 2070
1660ti

has no fan speed or way to adjust it with the builtin oc..

[MoparMiningLLC]

Can you please send me the API report via mail or PM for this miner (toolbar: Tools -> API Report)? With this information I can review what the miner is reporting and maybe adjust Awesome Miner a bit based on this.

Most likely this miner is reporting "FPGA" as device type.

sent via pm

Thanks for sharing the report. This miner is reporting a hashrate of ~2.4MH/s, which of course is incorrect given that it's actually working at a speed of >100MH/s. I wasn't able to find any details reported by the miner that would make it possible for Awesome Miner to display the true hashrate. I think it's some kind of bug in the firmware for this miner where it reports incorrect hashrate.

ok I will try and share it back with Futurebit and see what they say.

@jstefanop - can you see above? I am trying to monitor the Apollo using AM but the API log does not report the correct speed. I can see on the Apollo UI that the speed  matches what the pool reports but its not being reflected in the api data.

Please direct these questions to support thread in the future. Yes the API has some incorrect stats, we only use bits of bfgminer to run the miner, but since its a standalone unit we never fleshed out full support for bfgminer API, as this would have required way more work than needed for what we build out on the UI side.

If Aswsome miner wants to implement support, all they have to do is calculate the hash rate from work utility and difficulty (he should know how to do this but if he needs the formula just tell him to PM me.)

[patrike]

Hi Patrike. I'm trying to add data from the exchange, the data is not readable https://open.citex.co.kr/api/v1/common/snapshot/ETH-BTC. Everything works through postman. The exchange answered me "Please add auth key in your header and the others are unchanged.

For example, headers = {'Authorization': auth key}. Your auth key is '5cc57956cbfb ************3479888143e8982d50c7115fa8d4'.

Do they have any protection?

This API requires a custom HTTP header value for "Authorization" to be set in order to access the API. Awesome Miner is unfortunately not able to set custom HTTP header values for this when making these requests.

[patrike]

I was hoping someone else would report it .

my
RTX 2060 super
RTX 2070
1660ti

has no fan speed or way to adjust it with the builtin oc..

So it's not only that the Native Overclocking cannot change the fan speed - the current fan speed is not display at all? I've not had any other reports on this issue.

Could you please select a miner and click on the GPU tab, then click "View GPU Details". Please share this information with me via PM or mail. Thanks!

[patrike]

Can you please send me the API report via mail or PM for this miner (toolbar: Tools -> API Report)? With this information I can review what the miner is reporting and maybe adjust Awesome Miner a bit based on this.

Most likely this miner is reporting "FPGA" as device type.

sent via pm

Thanks for sharing the report. This miner is reporting a hashrate of ~2.4MH/s, which of course is incorrect given that it's actually working at a speed of >100MH/s. I wasn't able to find any details reported by the miner that would make it possible for Awesome Miner to display the true hashrate. I think it's some kind of bug in the firmware for this miner where it reports incorrect hashrate.

ok I will try and share it back with Futurebit and see what they say.

@jstefanop - can you see above? I am trying to monitor the Apollo using AM but the API log does not report the correct speed. I can see on the Apollo UI that the speed  matches what the pool reports but its not being reflected in the api data.

Please direct these questions to support thread in the future. Yes the API has some incorrect stats, we only use bits of bfgminer to run the miner, but since its a standalone unit we never fleshed out full support for bfgminer API, as this would have required way more work than needed for what we build out on the UI side.

If Aswsome miner wants to implement support, all they have to do is calculate the hash rate from work utility and difficulty (he should know how to do this but if he needs the formula just tell him to PM me.)

Thanks for sharing the information. It looks like they are aware of the hashrate reporting limitation/issue.

I prefer is the ASIC companies reports the correct information in the first place - otherwise Awesome Miner needs to find some unique detail in the API output from this miner that makes it possible to detect - then recalculate some properties - and finally make sure it doesn't have any side effect on the other 50+ ASIC miners that are supported.

What might be unique in the API output from this miner is that it uses a PGA device name "APL" (as in Apollo), so that could be a way forward.