erok
|
|
November 04, 2014, 01:27:54 PM |
|
Was experiencing similar problems. I noted too that the amount of active connections plummeted to 1 or 2 (even 0 iirc) in the hours preceding. Perhaps members normally staking were on a testnet? Anyway I nuked everything except the wallet.dat and am now re-syncing the whole blockchain. Will let u know if it works out EDIT: I also noticed the Announcements section of the wallet has been updated. No longer says "00Smurf is awesome" + has a new entry Lol, sorry about that. Discovered a bug, that allowed anyone to make announcements. That was my test announcement. It's since been fixed. Thanks for replies. I apologize to ask again. but the sync problem seems to remain with no progress though. Just can't get what am I doing wrong. Having around 4 active connections most of the time, however sync is stuck for several days already. The default win firewall is turned off, running comodo instead. Win 8.1. The main point is that up until the day before yesterday everything seemed to be fine. Now the number of "blocks remaining" to sync only grows. http://clip2net.com/s/jdicrOhttp://clip2net.com/s/jdil8wAny help/advice would be highly appreciated. Thanks. I have been having similar problems and I changed to litemode yesterday and that seemed to solve everything. Working fine now Thanks for reply =) Maybe a silly question, but how do you change to litemode? Here in the thread I only see the download link for the full client. Regards. Hi, you can either remove everything in your appdata folder except for the wallet.dat, That is what holds the keys so you can access your coins DO NOT DELETE wallet.dat But remove everything else in that folder and you can get the bootstrap.dat file from here https://bitcointalk.org/index.php?topic=745352.msg9140802#msg9140802 and follow the instructions. Hint: There is only one wallet download necessary its both full and litemode able. The bootstrap.dat is most of the blockchain and the client will retrieve the blocks from that file; making it faster instead of downloading them slowly over the net. Let it do its thing for some time and you should be hot to trott. Alternatively you can follow these instructions to run the lite wallet. http://shadowcoin.info/wiki/ShadowLiteHave added the bootstrap file and restarted the wallet. It is now importing the bootstrap chain file for 3 hours already. Does it really take so long or there is something wrong with my setup? From appdata everything besides wallet.dat has been deleted before restarting. Regards. I would backup the wallet.dat and start with a fresh build.
|
"the destruction of privacy widens the existing power imbalance between the ruling factions and everyone else" -- Julian Assange
|
|
|
Edward_Cryptonit
|
|
November 04, 2014, 01:40:45 PM |
|
Was experiencing similar problems. I noted too that the amount of active connections plummeted to 1 or 2 (even 0 iirc) in the hours preceding. Perhaps members normally staking were on a testnet? Anyway I nuked everything except the wallet.dat and am now re-syncing the whole blockchain. Will let u know if it works out EDIT: I also noticed the Announcements section of the wallet has been updated. No longer says "00Smurf is awesome" + has a new entry Lol, sorry about that. Discovered a bug, that allowed anyone to make announcements. That was my test announcement. It's since been fixed. Thanks for replies. I apologize to ask again. but the sync problem seems to remain with no progress though. Just can't get what am I doing wrong. Having around 4 active connections most of the time, however sync is stuck for several days already. The default win firewall is turned off, running comodo instead. Win 8.1. The main point is that up until the day before yesterday everything seemed to be fine. Now the number of "blocks remaining" to sync only grows. http://clip2net.com/s/jdicrOhttp://clip2net.com/s/jdil8wAny help/advice would be highly appreciated. Thanks. I have been having similar problems and I changed to litemode yesterday and that seemed to solve everything. Working fine now Thanks for reply =) Maybe a silly question, but how do you change to litemode? Here in the thread I only see the download link for the full client. Regards. Hi, you can either remove everything in your appdata folder except for the wallet.dat, That is what holds the keys so you can access your coins DO NOT DELETE wallet.dat But remove everything else in that folder and you can get the bootstrap.dat file from here https://bitcointalk.org/index.php?topic=745352.msg9140802#msg9140802 and follow the instructions. Hint: There is only one wallet download necessary its both full and litemode able. The bootstrap.dat is most of the blockchain and the client will retrieve the blocks from that file; making it faster instead of downloading them slowly over the net. Let it do its thing for some time and you should be hot to trott. Alternatively you can follow these instructions to run the lite wallet. http://shadowcoin.info/wiki/ShadowLiteHave added the bootstrap file and restarted the wallet. It is now importing the bootstrap chain file for 3 hours already. Does it really take so long or there is something wrong with my setup? From appdata everything besides wallet.dat has been deleted before restarting. Regards. I would backup the wallet.dat and start with a fresh build. Thanks. Could you btw give a hint where to find the config file? Could no find any information in the wiki/faq
|
|
|
|
child_harold
|
|
November 04, 2014, 01:46:00 PM |
|
^^ use litemode to sync to newest block and then go back to fullmode
|
|
|
|
Edward_Cryptonit
|
|
November 04, 2014, 01:50:13 PM |
|
^^ use litemode to sync to newest block and then go back to fullmode
That's the problem ) I cannot find the config where i switch to litemode ) Could you give a hint?
|
|
|
|
Soepkip
|
|
November 04, 2014, 02:09:02 PM |
|
^^ use litemode to sync to newest block and then go back to fullmode
That's the problem ) I cannot find the config where i switch to litemode ) Could you give a hint? Info: http://www.shadowcash.info/wiki/ShadowLiteThe conf file should exist in your AppData/Roaming/ShadowCash folder, if not you can create it there as 'shadowcash.conf' and add the wished parameters.
|
|
|
|
wharfplow
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 04, 2014, 02:14:38 PM |
|
^^ use litemode to sync to newest block and then go back to fullmode
That's the problem ) I cannot find the config where i switch to litemode ) Could you give a hint? Info: http://www.shadowcash.info/wiki/ShadowLiteThe conf file should exist in your AppData/Roaming/ShadowCash folder, if not you can create it there as 'shadowcash.conf' and add the wished parameters. Yes the .conf is not automatically created. Just make a new txt file and rename it shadowcash.conf. Alternatively, (in Windows) you can create a txt in the same directory as shadow.exe and type "shadow.exe -thinmode" and save the file as "shadowlite.bat" then whenever you want the lite wallet, you run the .bat. Whenever you want the full wallet, you run shadow.exe.
|
|
|
|
Edward_Cryptonit
|
|
November 04, 2014, 02:51:34 PM |
|
^^ use litemode to sync to newest block and then go back to fullmode
That's the problem ) I cannot find the config where i switch to litemode ) Could you give a hint? Info: http://www.shadowcash.info/wiki/ShadowLiteThe conf file should exist in your AppData/Roaming/ShadowCash folder, if not you can create it there as 'shadowcash.conf' and add the wished parameters. Yes the .conf is not automatically created. Just make a new txt file and rename it shadowcash.conf. Alternatively, (in Windows) you can create a txt in the same directory as shadow.exe and type "shadow.exe -thinmode" and save the file as "shadowlite.bat" then whenever you want the lite wallet, you run the .bat. Whenever you want the full wallet, you run shadow.exe. Thanks for all your advices. Launched in thin mode now - ok, waiting to get all the headers of transaction history, which indeed seems to be faster than getting the blocks. Will update when its complete and whether everything would be up-to-date on my wallet, the wallet.dat has been imported to the appdata directory from backup. Regards
|
|
|
|
Soepkip
|
|
November 04, 2014, 04:30:39 PM |
|
^^ use litemode to sync to newest block and then go back to fullmode
That's the problem ) I cannot find the config where i switch to litemode ) Could you give a hint? Info: http://www.shadowcash.info/wiki/ShadowLiteThe conf file should exist in your AppData/Roaming/ShadowCash folder, if not you can create it there as 'shadowcash.conf' and add the wished parameters. Yes the .conf is not automatically created. Just make a new txt file and rename it shadowcash.conf. Alternatively, (in Windows) you can create a txt in the same directory as shadow.exe and type "shadow.exe -thinmode" and save the file as "shadowlite.bat" then whenever you want the lite wallet, you run the .bat. Whenever you want the full wallet, you run shadow.exe. Thanks for all your advices. Launched in thin mode now - ok, waiting to get all the headers of transaction history, which indeed seems to be faster than getting the blocks. Will update when its complete and whether everything would be up-to-date on my wallet, the wallet.dat has been imported to the appdata directory from backup. Regards Okay, if you keep having issues you could also join us on IRC (Freenode network) in #shadowcash
|
|
|
|
mmbai83
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 04, 2014, 07:56:18 PM |
|
Ok had like 1,200SDC and don't know what happened to the wallet its not syncing tried rebooting computer nothing still now wallet won't even start but I have a backup.dat on my flash drive anyone help me?
|
|
|
|
LongAndShort
Legendary
Offline
Activity: 1078
Merit: 1050
|
|
November 04, 2014, 08:05:42 PM |
|
Ok had like 1,200SDC and don't know what happened to the wallet its not syncing tried rebooting computer nothing still now wallet won't even start but I have a backup.dat on my flash drive anyone help me?
I suggest that you re-download the blockchain, If you follow the steps typed above, on this page, you will achieve this. There are a few alternative options too. All of the terms we use will also show up in a search engine. Just add bitcoin, litecoin, or crypto to the search if they don't. HINT: Thin mode is by far the quickest and easiest way to setup a wallet and be synced with the network http://shadowcoin.info/wiki/ShadowLite
|
|
|
|
Schild_
|
|
November 04, 2014, 09:38:20 PM |
|
Other coin devs finding out about Shadow's tech: SOOOOOOOOON.
|
|
|
|
00Smurf
|
|
November 05, 2014, 12:55:36 AM |
|
Other coin devs finding out about Shadow's tech: SOOOOOOOOON. Thats a funny show, just started watching it.
|
|
|
|
xxxgoodgirls
Legendary
Offline
Activity: 1092
Merit: 1001
|
|
November 05, 2014, 03:52:01 AM |
|
Other coin devs finding out about Shadow's tech: SOOOOOOOOON. Thats a funny show, just started watching it. Yeah lol the IT crowd is amazing
|
|
|
|
mmbai83
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 05, 2014, 10:18:48 AM |
|
I am definitely not seeing the wallet.dat file I have even clicked the view all hidden files and folders I can't see the appdata folder either I wonder if there is something I am doing wrong with it
|
|
|
|
Soepkip
|
|
November 05, 2014, 11:59:37 AM |
|
I am definitely not seeing the wallet.dat file I have even clicked the view all hidden files and folders I can't see the appdata folder either I wonder if there is something I am doing wrong with it
Should be located in Appdata/Roaming/ShadowCash
|
|
|
|
wharfplow
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 05, 2014, 02:07:01 PM |
|
I am definitely not seeing the wallet.dat file I have even clicked the view all hidden files and folders I can't see the appdata folder either I wonder if there is something I am doing wrong with it
If you're in windows 7/8, open the start menu and in the search bar type "%appdata%" and hit enter. This will bring you to the correct directory, just find the ShadowCash folder and the wallet.dat will be in there.
|
|
|
|
mmbai83
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 05, 2014, 06:24:39 PM |
|
I am definitely not seeing the wallet.dat file I have even clicked the view all hidden files and folders I can't see the appdata folder either I wonder if there is something I am doing wrong with it
Should be located in Appdata/Roaming/ShadowCash Thanks
|
|
|
|
|
LongAndShort
Legendary
Offline
Activity: 1078
Merit: 1050
|
|
November 05, 2014, 06:57:43 PM |
|
Yes rynomster was brought in to dev the cinni em and thats it then he left! Its been public knowledge for some time now! Next!!
|
|
|
|
benthach
Legendary
Offline
Activity: 1764
Merit: 1000
|
|
November 05, 2014, 07:54:56 PM |
|
Yes rynomster was brought in to dev the cinni em and thats it then he left! Its been public knowledge for some time now! Next!! where is this public knowledge can i find?
|
reddit btcwriter1 - twitter kingpininvestor
|
|
|
|