KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2438 blocks

[philipma1957]

Chivas 18...

https://i.imgur.com/1z7wsLi.jpg

I got a bottle of this for my dad yesterday before I left - he thinks it's pretty ok
https://www.winepeers.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/w/h/wh0023_1_b.jpg
It's around $50 (‎¥4850) at a bottle shop in Tokyo (Hasegawa) but 3 or more times that in any other country

I like Vodka myself but a good single malt whiskey is nice.

[DarKSm0ke]

A quick block before 19% diff increase would be nice!

[jimmyboy87]

Blocks blocks blocks!!! Come ON!!

Figured I try again....

[philipma1957]

A quick block before 19% diff increase would be nice!

Tell you what I will toss down a shot of  homemade vanilla vodka in the next five minutes in an effort to pop a block.

[NomadGroup]

Chivas 18...

https://i.imgur.com/1z7wsLi.jpg

I got a bottle of this for my dad yesterday before I left - he thinks it's pretty ok
https://www.winepeers.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/w/h/wh0023_1_b.jpg
It's around $50 (‎¥4850) at a bottle shop in Tokyo (Hasegawa) but 3 or more times that in any other country

Wow $50 per bottle is really cheap!    Goes around $100 a bottle here, same goes for Buchanan's 18 

[NomadGroup]

Have we jumped up a difficulty?  Seems like it's pretty hard to crack them blocks lately even with having +10ph.  .  The btc price is recuperating though, that's good news! 

[DarKSm0ke]

Have we jumped up a difficulty?  Seems like it's pretty hard to crack them blocks lately even with having +10ph.  .  The btc price is recuperating though, that's good news!  

Yes difficulty has jumped of 19.58%! We are still a little fish in the sea with roughly 1.2% of BTC hashrate.

[Apprentice]

Have we jumped up a difficulty?  Seems like it's pretty hard to crack them blocks lately even with having +10ph.  .  The btc price is recuperating though, that's good news!  

Yes difficulty has jumped of 19.58%! We are still a little fish in the sea with roughly 1.2% of BTC hashrate.

few weeks back there were talks that the difficulty is supposed to go down

[NomadGroup]

Have we jumped up a difficulty?  Seems like it's pretty hard to crack them blocks lately even with having +10ph.  .  The btc price is recuperating though, that's good news!  

Yes difficulty has jumped of 19.58%! We are still a little fish in the sea with roughly 1.2% of BTC hashrate.

Holy smokes!!!!  .  My Goodness that is a lot !!!!!!!!!

[NomadGroup]

Have we jumped up a difficulty?  Seems like it's pretty hard to crack them blocks lately even with having +10ph.  .  The btc price is recuperating though, that's good news!  

Yes difficulty has jumped of 19.58%! We are still a little fish in the sea with roughly 1.2% of BTC hashrate.

few weeks back there were talks that the difficulty is supposed to go down

The BTC price really need to hurry up and get up there!   

[ordimans]

The difficulty changed yesterday, the profit have decreased a lot since two week agos with some S9

[mousehouse]

The difficulty changed yesterday, the profit have decreased a lot since two week agos with some S9

Difficulty +20% is never going to be a good thing for us, however, last 4 blocks have not been that great in terms of luck either ;-) would be nice to make a nice jump again so we can reach 60 by the end of the month.

Dancing for happy blocks!

[CryptoAtticus]

The difficulty changed yesterday, the profit have decreased a lot since two week agos with some S9

Difficulty +20% is never going to be a good thing for us, however, last 4 blocks have not been that great in terms of luck either ;-) would be nice to make a nice jump again so we can reach 60 by the end of the month.

Dancing for happy blocks!

https://ak2.picdn.net/shutterstock/videos/14836642/thumb/11.jpg?i10c=img.resize(height:160)

Might be not causation, but when difficulty increased, it appeared that the price went up above $4k.

[clgrissom3]

The difficulty changed yesterday, the profit have decreased a lot since two week agos with some S9

People!  Keep your sanity and watch your long term profits...If you constantly watch daily and weekly profits, you will go nuts!  There is just too much variance in this venture for short term happiness.

[Rockou]

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please guys, help me. I'm really sad about that

Here is a picture of what I'm telling you:

https://image.ibb.co/gRnD15/AYUDA_1.jpg

[Apprentice]

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad

Here is a picture of what I'm telling you:

You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.

I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).

[Rockou]

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad

Here is a picture of what I'm telling you:

https://ibb.co/b2imM5

You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.

I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).

Hello Apprentice I tried to put the screenshot but I do not know why it does not appear

https://ibb.co/b2imM5

I clicked on "Insert Image" then I put the address, lets see if it works...
https://ibb.co/b2imM5

The board I must buy is the one is in the bitmain address?

Do you guys have any guid how to do that?

[mousehouse]

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad

Here is a picture of what I'm telling you:

You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.

I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).

Hello Apprentice I tried to put the screenshot but I do not know why it does not appear



I clicked on "Insert Image" then I put the address, lets see if it works...


The board I must buy is the one is in the bitmain address?

Do you guys have any guid how to do that?

I hear good stories about http://bitmainwarranty.com. They are US-based, might save you a lot of delay and trouble going in and out of China. Have you tried taking the power off your S9 for some time, and then powering it up again (from the image it looks like that). Might help boot the board to life again.

[Rockou]

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad

Here is a picture of what I'm telling you:

https://ibb.co/b2imM5

You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.

I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).

Hello Apprentice I tried to put the screenshot but I do not know why it does not appear

https://ibb.co/b2imM5

I clicked on "Insert Image" then I put the address, lets see if it works...
https://ibb.co/b2imM5

The board I must buy is the one is in the bitmain address?

Do you guys have any guid how to do that?

I hear good stories about http://bitmainwarranty.com. They are US-based, might save you a lot of delay and trouble going in and out of China. Have you tried taking the power off your S9 for some time, and then powering it up again (from the image it looks like that). Might help boot the board to life again.

Do you think It could work? I did it today for a while but it just worked for a while then It turned off... I can't send this kind of products out of my country due to some regulations we do have here... thats why I'm worry about this. Do you know any solution about that? Where can I buy those hash board and Do it by myself?

[ordimans]

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad

Here is a picture of what I'm telling you:

You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.

I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).

It's possible with Awesomeminer to put backup ?
Because i manage pool with it not directly by web interface.

EDIt:
Just add the pool on the pool page for each miner

You confirm is useful when the first is offline.
how can i check if i lost something because first was offline ? there is a stat which mean that ?


EDIT2:
I have some doubt if the profit is very good if a minimum luck is not here....
For example, with my hashrate 27.3TH/s, i earn an average of 0.0046 by block found. (it's the stable earning after 3 days of running)
If i estimate with expected block for september, i found :
31 * 0.0046 = 0.1426

On nicehash, for the same Hashrate, i have 0.2597 for the month, minus  4% = 0.2493.
To have the same earning on Kano, it need 54 blocks found for the month.
Everything is calculated in BTC, and the BTC/USD exchange will not affect that.

My simulation is wrong ?