KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2438 blocks

[mdude77]

I want to beat a dead horse again.

About the 5nd and how close i am to passing 5nd.

Using one s9 under the last reward for block 500622 it has your n avg is 12.96.

Under workers/shiftgraph my red line is at 10.90.

I think im close. But not sure im there yet to get full payout.

Was wondering ifanyone seen this can help me?

TBH, I don't know how to interpret the graph either.  

However, I can tell you, since the pool just found a block, look at your rewards to see what "your N avg" is.  Based on what you said above, it should be pretty close, if not spot on to your S9 hashpower, which means you are now at 5N.

M

[clgrissom3]

Block! by schmokeandapancake
16BTC
Also 4th network block for Xmas

Aaaaa, sweet block for Christmas!

[beltsniffer]

I want to beat a dead horse again.

About the 5nd and how close i am to passing 5nd.

Using one s9 under the last reward for block 500622 it has your n avg is 12.96.

Under workers/shiftgraph my red line is at 10.90.

I think im close. But not sure im there yet to get full payout.

It sounds like your pretty much there as an s9, depending on which one you have, is ~13.5th/s +/-5%. If you are referring to the graph on the workers->shift graph page, the red shaded area is the last 5nd. The whole graph is, I believe, 21 days. The red line is the avg of the whole graph, not of your 5nd.

[rifleman74]

Thank you for the block, BADA BING!

I don't see the payout for the previous block though....

[clgrissom3]

Thank you for the block, BADA BING!

I don't see the payout for the previous block though....

The network is still a little slow but it should show up shortly.

[mdude77]

Thank you for the block, BADA BING!

I don't see the payout for the previous block though....

The network is still a little slow but it should show up shortly.

Mine popped in the second the block was found.  That's how I knew a block was found.

Maybe depends on the client you're using?

M

[brad2388]

I want to beat a dead horse again.

About the 5nd and how close i am to passing 5nd.

Using one s9 under the last reward for block 500622 it has your n avg is 12.96.

Under workers/shiftgraph my red line is at 10.90.

I think im close. But not sure im there yet to get full payout.

Was wondering ifanyone seen this can help me?

TBH, I don't know how to interpret the graph either.  

However, I can tell you, since the pool just found a block, look at your rewards to see what "your N avg" is.  Based on what you said above, it should be pretty close, if not spot on to your S9 hashpower, which means you are now at 5N.

M

The 2 dont line up yet. My n avg shows 12.45th. The line only shows 11.1 now.

[clgrissom3]

I want to beat a dead horse again.

About the 5nd and how close i am to passing 5nd.

Using one s9 under the last reward for block 500622 it has your n avg is 12.96.

Under workers/shiftgraph my red line is at 10.90.

I think im close. But not sure im there yet to get full payout.

Was wondering ifanyone seen this can help me?

TBH, I don't know how to interpret the graph either. 

However, I can tell you, since the pool just found a block, look at your rewards to see what "your N avg" is.  Based on what you said above, it should be pretty close, if not spot on to your S9 hashpower, which means you are now at 5N.

M

The 2 dont line up yet. My n avg shows 12.45th. The line only shows 11.1 now.

Most of the time they won't line up...your n average (12.45th) is only the part of the graph highlighted in light red.
It's the part that says "Last 5Nd Reward -->" or the part that's shown in your reward for block 500907.
The red line average is your hash average (11.1th) across the entire chart from left to right.  I'd say you have reached your 5Nd.

[brad2388]

I want to beat a dead horse again.

About the 5nd and how close i am to passing 5nd.

Using one s9 under the last reward for block 500622 it has your n avg is 12.96.

Under workers/shiftgraph my red line is at 10.90.

I think im close. But not sure im there yet to get full payout.

Was wondering ifanyone seen this can help me?

TBH, I don't know how to interpret the graph either. 

However, I can tell you, since the pool just found a block, look at your rewards to see what "your N avg" is.  Based on what you said above, it should be pretty close, if not spot on to your S9 hashpower, which means you are now at 5N.

M

The 2 dont line up yet. My n avg shows 12.45th. The line only shows 11.1 now.

Most of the time they won't line up...your n average (12.45th) is only the part of the graph highlighted in light red.
It's the part that says "Last 5Nd Reward -->" or the part that's shown in your reward for block 500907.
The red line average is your hash average (11.1th) across the entire chart from left to right.  I'd say you have reached your 5Nd.

Gotcha! Awesome! The last block was great! Didnt know if it got better. But ill take it! Thanks

[AerialGopher]

19.3 hours left from this point until the next block. :-)
14.52 Bitcoin

[AerialGopher]

How often should an S9 be shut down and dust blown out of it with compressed air,  if ever?  I know it would depend on the environment it is in, but say in the average house.

Just wondering if anyone cleans thier out, or if you run them hard and let the dust bake on?

I am also wondering why people seem to think that you cannot run an S9 on 120 volt?  I understadnt that the power supply puts out less watts when on 120 volt as apposed to 240 volt.  Just wanted to get peoples ideas on if they should be run on 240?

Mine draws 12.6 amps at 120 Volt,  about 1525 watt

[mdude77]

How often should an S9 be shut down and dust blown out of it with compressed air,  if ever?  I know it would depend on the environment it is in, but say in the average house.

Just wondering if anyone cleans thier out, or if you run them hard and let the dust bake on?

I am also wondering why people seem to think that you cannot run an S9 on 120 volt?  I understadnt that the power supply puts out less watts when on 120 volt as apposed to 240 volt.  Just wanted to get peoples ideas on if they should be run on 240?

Mine draws 12.6 amps at 120 Volt,  about 1525 watt

The miner itself runs on DC from the PSU.

220/240 is preferred for many reasons. 

One of which is because it pulls half the current of 110/120.  Half the current means half the heat, and warm wires are not your friend. 

Also, the average US residential circuit is 15A.  You shouldn't run at > 80% of the capacity of the circuit for an extended period of time.  20% of 15A is 3A, so you shouldn't be running over 12A on a 15A circuit.  If you have a true 20A circuit, that is sized properly from breaker to outlet, you're probably okay.  Otherwise you're asking for trouble pulling 12.6A 24/7.

Furthermore, if your circuits are sized properly, you can run 2x the equipment at 220/240.

Lastly, 1512 watts is 1512 watts, whether it's 120 * 12.6, or 240 * 6.3.

M

[AerialGopher]

How often should an S9 be shut down and dust blown out of it with compressed air,  if ever?  I know it would depend on the environment it is in, but say in the average house.

Just wondering if anyone cleans thier out, or if you run them hard and let the dust bake on?

I am also wondering why people seem to think that you cannot run an S9 on 120 volt?  I understadnt that the power supply puts out less watts when on 120 volt as apposed to 240 volt.  Just wanted to get peoples ideas on if they should be run on 240?

Mine draws 12.6 amps at 120 Volt,  about 1525 watt

The miner itself runs on DC from the PSU.

220/240 is preferred for many reasons.  

One of which is because it pulls half the current of 110/120.  Half the current means half the heat, and warm wires are not your friend.  

Also, the average US residential circuit is 15A.  You shouldn't run at > 80% of the capacity of the circuit for an extended period of time.  20% of 15A is 3A, so you shouldn't be running over 12A on a 15A circuit.  If you have a true 20A circuit, that is sized properly from breaker to outlet, you're probably okay.  Otherwise you're asking for trouble pulling 12.6A 24/7.

Furthermore, if your circuits are sized properly, you can run 2x the equipment at 220/240.

Lastly, 1512 watts is 1512 watts, whether it's 120 * 12.6, or 240 * 6.3.

M

Yes, I understand the math of VxA=W

What I was wondering is that the PSU ( Um yes DC I Know) the PSU max DC output when input when it is on 120v input is 100 Watt 12 volt DC output, and i think 130 watt or 133 watt when input is 240.  Does the S9 need that extra bit of 30 watts?  I have had mine running on 240 as well, and I seen a slightly higher hash rate, but that could of been due to the temp being lower in the area that I had it running.  went from 20 deg ambient to 5 deg ambient when it was on 240.

The New nomex 14/2,  90 deg C that they use in residential now is actually rated for 25 amps.  The breakers used are 15 amp.  I believe this was due to the OLD wiring being rated for only 60 deg C which made it rated for only 15 amp.

** Note:  I am refering to the Bitmain PSU.

[rifleman74]

How often should an S9 be shut down and dust blown out of it with compressed air,  if ever?  I know it would depend on the environment it is in, but say in the average house.

Just wondering if anyone cleans thier out, or if you run them hard and let the dust bake on?

I am also wondering why people seem to think that you cannot run an S9 on 120 volt?  I understadnt that the power supply puts out less watts when on 120 volt as apposed to 240 volt.  Just wanted to get peoples ideas on if they should be run on 240?

Mine draws 12.6 amps at 120 Volt,  about 1525 watt

The miner itself runs on DC from the PSU.

220/240 is preferred for many reasons.  

One of which is because it pulls half the current of 110/120.  Half the current means half the heat, and warm wires are not your friend.  

Also, the average US residential circuit is 15A.  You shouldn't run at > 80% of the capacity of the circuit for an extended period of time.  20% of 15A is 3A, so you shouldn't be running over 12A on a 15A circuit.  If you have a true 20A circuit, that is sized properly from breaker to outlet, you're probably okay.  Otherwise you're asking for trouble pulling 12.6A 24/7.

Furthermore, if your circuits are sized properly, you can run 2x the equipment at 220/240.

Lastly, 1512 watts is 1512 watts, whether it's 120 * 12.6, or 240 * 6.3.

M

Yes, I understand the math of VxA=W

What I was wondering is that the PSU ( Um yes DC I Know) the PSU max DC output when input when it is on 120v input is 100 Watt 12 volt DC output, and i think 130 watt or 133 watt when input is 240.  Does the S9 need that extra bit of 30 watts?  I have had mine running on 240 as well, and I seen a slightly higher hash rate, but that could of been due to the temp being lower in the area that I had it running.  went from 20 deg ambient to 5 deg ambient when it was on 240.

The New nomex 14/2,  90 deg C that they use in residential now is actually rated for 25 amps.  The breakers used are 15 amp.  I believe this was due to the OLD wiring being rated for only 60 deg C which made it rated for only 15 amp.

** Note:  I am refering to the Bitmain PSU.

The miner runs "better" with the 240.   Every little bit helps.

[Jeremiah1610]

Hello all, super noob here. Have 3 S9's ordered from ebay for the late Jan batch, praying this order doesn't get cancelled. Hopefully be online by the 2nd week of Feb. Looks like a great community and I can't wait to join in the fun.

[kano]

Hello all, super noob here. Have 3 S9's ordered from ebay for the late Jan batch, praying this order doesn't get cancelled. Hopefully be online by the 2nd week of Feb. Looks like a great community and I can't wait to join in the fun.

The more the merrier
Merry Xmas

[Waztim]

Hello all, super noob here. Have 3 S9's ordered from ebay for the late Jan batch, praying this order doesn't get cancelled. Hopefully be online by the 2nd week of Feb. Looks like a great community and I can't wait to join in the fun.

Do your homework now. Ping and find out the fastest server to connect to. Read the threads and try and discern how to set them up and how the 5ND works, etc BEFORE they arrive. If you can get the 22/240 V circuits installed before they arrive, Power Distribution Units and Power supplies on hand. Many Noobs don't do this and end up finding themselves trying to put all the little pieces but needed pieces into place. Welcome to the Best Bitcoin Mining Pool on the Planet with the Best Subject Matter Expert running it. Mine On With Kano-San. Merry Christmas.

[diasmd]

Merry Xmas All!

Just started 12h ago with a few S9s. Good to be here.

Already got a reward and payment, but it does not show in my wallet yet, is that normal?

Sorry for the noob question, first timer..

Happy holidays and good mining!

Cheers

[pusttiu]

Happy holidays and good mining!
new payment MS KANO

[fjtropepe]

Merry Xmas All!

Just started 12h ago with a few S9s. Good to be here.

Already got a reward and payment, but it does not show in my wallet yet, is that normal?

Sorry for the noob question, first timer..

Happy holidays and good mining!

Cheers

You will see it when we find the next block. Go back two or three pages. We just had a major discussion about this and Kano and others broke it down Barney style. Any further questions, feel free to ask.