KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2435 blocks

[ccgllc]

Guys tell me tell me that I made the correct choice,I just bought 68 refurbished avalonminer 741 with 1 year warranty for 14000 euros,thats 510 th, so I paid 25 euros per TH,if I had gone with the S9i new with 3 months warranty,I would have bought with 14000 14 miners with a total of 196 TH which is 72 euro per TH.So I already have 110TH in the pool and I will reach 620 by the end of june,I hope i made the right choice.

Depends on the cost of your electricity.

[1714648532]

1714648532

[1714648532]

1714648532

[1714648532]

1714648532

[1714648532]

1714648532

[EncoreMining]

Guys tell me tell me that I made the correct choice,I just bought 68 refurbished avalonminer 741 with 1 year warranty for 14000 euros,thats 510 th, so I paid 25 euros per TH,if I had gone with the S9i new with 3 months warranty,I would have bought with 14000 14 miners with a total of 196 TH which is 72 euro per TH.So I already have 110TH in the pool and I will reach 620 by the end of june,I hope i made the right choice.

If electricity is cheep then yes you are doing well. In my farm I’m starting to replace my 741 with 841.

[kano]

Guys tell me tell me that I made the correct choice,I just bought 68 refurbished avalonminer 741 with 1 year warranty for 14000 euros,thats 510 th, so I paid 25 euros per TH,if I had gone with the S9i new with 3 months warranty,I would have bought with 14000 14 miners with a total of 196 TH which is 72 euro per TH.So I already have 110TH in the pool and I will reach 620 by the end of june,I hope i made the right choice.

Long term, the electricity cost will decide how long you can keep the the miners running profitably.
But when the hash rate you start with is so much higher for the same price, I'd say you are looking good

If Diff averages 8% for the next 100 days, you should mine around 2BTC in 100 days
If Diff averages 4% for the next 100 days, you should mine around 2.27BTC in 100 days
http://tradebtc.net/bitcalc.php

[porepete]

Thanks for the info,I pay 50 euros per month for electricity regardless consumption and with 68 741 ,10 T9+, 1 M3X and 1 L3+ i reach the maximum of power consumption,I will probably start upgrading the miners atleast 1 year from now.

[BSGMiner]

Thanks for the info,I pay 50 euros per month for electricity regardless consumption and with 68 741 ,10 T9+, 1 M3X and 1 L3+ i reach the maximum of power consumption,I will probably start upgrading the miners atleast 1 year from now.

If I did that, I'd be making $12/day...

Edit: Conditions like this would break men of weaker willpower.

[rifleman74]

Guys tell me tell me that I made the correct choice,I just bought 68 refurbished avalonminer 741 with 1 year warranty for 14000 euros,thats 510 th, so I paid 25 euros per TH,if I had gone with the S9i new with 3 months warranty,I would have bought with 14000 14 miners with a total of 196 TH which is 72 euro per TH.So I already have 110TH in the pool and I will reach 620 by the end of june,I hope i made the right choice.

Not bad at all, let's crack some blocks for you!

MINE ON WITH KANO-SAN!

[dutchlincoln]

Guys tell me tell me that I made the correct choice,I just bought 68 refurbished avalonminer 741 with 1 year warranty for 14000 euros,thats 510 th, so I paid 25 euros per TH,if I had gone with the S9i new with 3 months warranty,I would have bought with 14000 14 miners with a total of 196 TH which is 72 euro per TH.So I already have 110TH in the pool and I will reach 620 by the end of june,I hope i made the right choice.

If you have free energy, its a great choice 

Why compare with the S9? Should compare with v9 and T9

[Prowler310]

Firesale continues @ bitmain.  Just received an email that they lowered the price to 750 with the PSU.  I'm not sure if you can use coupons at this price. 

What do you think they have up their sleeve? Some new triple speed BTC miner?

[Yrth]

Firesale continues @ bitmain.  Just received an email that they lowered the price to 750 with the PSU.  I'm not sure if you can use coupons at this price.  

You can. I just ordered two of them and used my last two $420 coupons on the purchase.

[Experimenter]

I pay 50 euros per month for electricity regardless consumption

As noted above, electricity cost is one of the biggest concerns.
If you have a flat rate regardless of consumption, I think you made the right choice!

[kano]

The AWSLS UK node has dropped off the network.
Although I've posted to them about it, I'm awaiting (anyone) at Amazon to actually realise their London server networks are dead ... been 45 minutes so far

[dutchlincoln]

Does it affect the dutch/german node as well?
No real insight yet as i'm at work, but i can see most miners went offline, and right now they're starting again.

[kano]

Does it affect the dutch/german node as well?
No real insight yet as i'm at work, but i can see most miners went offline, and right now they're starting again.

The old NL node points to the UK node.

UK node is back online.
It was off from 08:54 UTC until 10:15 UTC
(the server was actually dead/offline from 08:54 UTC until 10:09 UTC)
I've sent some unfriendly messages to AWS ...

There was no problem with the DE node.

[overcon]

Does it affect the dutch/german node as well?
No real insight yet as i'm at work, but i can see most miners went offline, and right now they're starting again.

The old NL node points to the UK node.

UK node is back online.
It was off from 08:54 UTC until 10:15 UTC
(the server was actually dead/offline from 08:54 UTC until 10:09 UTC)
I've sent some unfriendly messages to AWS ...

There was no problem with the DE node.

I have been getting notifications since 5:02AM MST about my miners offline from Kano. Issues?

[yxt]

Hey a Lada Niva outperfom almost everything offroad if you look into the price-performance ratio

[kano]

Does it affect the dutch/german node as well?
No real insight yet as i'm at work, but i can see most miners went offline, and right now they're starting again.

The old NL node points to the UK node.

UK node is back online.
It was off from 08:54 UTC until 10:15 UTC
(the server was actually dead/offline from 08:54 UTC until 10:09 UTC)
I've sent some unfriendly messages to AWS ...

There was no problem with the DE node.

I have been getting notifications since 5:02AM MST about my miners offline from Kano. Issues?

Nope, only that one.

[rifleman74]

It has come to my attention that some of you are not dancing.   So I need you to get up out of your seat....ride that beat....and shake your groove thang.   IT IS BLOCK CRUNCHING TIME!


MINE ON WITH KANO-SAN!

[BSGMiner]

Kano, first off, great job on the uptime and general pool awesomeness!

One question/request for your backlog, though, would be:

Can you make the Shift Graph retain the individual worker names we input there even if they don't have activity right now?

Thanks for at least reading.

Mine on!

[kano]

Kano, first off, great job on the uptime and general pool awesomeness!

One question/request for your backlog, though, would be:

Can you make the Shift Graph retain the individual worker names we input there even if they don't have activity right now?

Thanks for at least reading.

Mine on!

They're saved in your browser cookies.
They just disappear off the graph temporarily - if the worker reappears later, the line will reappear also.
That's due to how the code works generating the data.
If anything doesn't get a match, it's not part of the display, and it's by design since it automatically removes multiples and invalid workernames from the data being sent to the web page.
The data sent is what is found in the database.

They're only removed from the cookies if you hit "Update" and they're not listed.
The "Update" button simply updates your cookies (then re-gets the page)

[BSGMiner]

...Can you make the Shift Graph retain the individual worker names we input there even if they don't have activity right now?

They're saved in your browser cookies.
They just disappear off the graph temporarily - if the worker reappears later, the line will reappear also.
That's due to how the code works generating the data...

Thanks! I'll just stop playing around with the worker names and wait until my failover node reappears.

Note: I say 'node' (singular) since my miner always skips to the bottom of failover pools.