[ANN] 10k Coin | Now with 10% PoS and 10000% Superblocks | 10k/MMXIV Market OPEN

[iGotSpots]

Hello, can anyone help me get this wallet installed on Ubuntu? I just keep getting undefined reference errors. Am I ,issing something?

Paste the errors, please

[1715307380]

1715307380

[1715307380]

1715307380

[TrialByError]

Hello, can anyone help me get this wallet installed on Ubuntu? I just keep getting undefined reference errors. Am I ,issing something?

Paste the errors, please

Well, when I run qmake I get probably 20  "Warning: ignoring <defaultcodec> element" notices, but it seems to finish fine. then when I run make there are a lot....



build/moc_qcustomplot.o:(.rodata._ZTV11QCustomPlot[_ZTV11QCustomPlot]+0x1b8): undefined reference to `QWidget::languageChange()'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPAxisRect[_ZTV11QCPAxisRect]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPAxisRect[_ZTV11QCPAxisRect]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV21QCPAbstractLegendItem[_ZTV21QCPAbstractLegendItem]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV21QCPAbstractLegendItem[_ZTV21QCPAbstractLegendItem]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV22QCPPlottableLegendItem[_ZTV22QCPPlottableLegendItem]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV22QCPPlottableLegendItem[_ZTV22QCPPlottableLegendItem]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV9QCPLegend[_ZTV9QCPLegend]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV9QCPLegend[_ZTV9QCPLegend]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV12QCPPlotTitle[_ZTV12QCPPlotTitle]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV12QCPPlotTitle[_ZTV12QCPPlotTitle]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV28QCPColorScaleAxisRectPrivate[_ZTV28QCPColorScaleAxisRectPrivate]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV28QCPColorScaleAxisRectPrivate[_ZTV28QCPColorScaleAxisRectPrivate]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV13QCPColorScale[_ZTV13QCPColorScale]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV13QCPColorScale[_ZTV13QCPColorScale]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV8QCPGraph[_ZTV8QCPGraph]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV8QCPGraph[_ZTV8QCPGraph]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV8QCPCurve[_ZTV8QCPCurve]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV8QCPCurve[_ZTV8QCPCurve]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV7QCPBars[_ZTV7QCPBars]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV7QCPBars[_ZTV7QCPBars]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV17QCPStatisticalBox[_ZTV17QCPStatisticalBox]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV17QCPStatisticalBox[_ZTV17QCPStatisticalBox]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPColorMap[_ZTV11QCPColorMap]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPColorMap[_ZTV11QCPColorMap]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV19QCPItemStraightLine[_ZTV19QCPItemStraightLine]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV19QCPItemStraightLine[_ZTV19QCPItemStraightLine]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPItemLine[_ZTV11QCPItemLine]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPItemLine[_ZTV11QCPItemLine]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV12QCPItemCurve[_ZTV12QCPItemCurve]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV12QCPItemCurve[_ZTV12QCPItemCurve]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPItemRect[_ZTV11QCPItemRect]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPItemRect[_ZTV11QCPItemRect]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPItemText[_ZTV11QCPItemText]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV11QCPItemText[_ZTV11QCPItemText]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV14QCPItemEllipse[_ZTV14QCPItemEllipse]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV14QCPItemEllipse[_ZTV14QCPItemEllipse]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV13QCPItemPixmap[_ZTV13QCPItemPixmap]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV13QCPItemPixmap[_ZTV13QCPItemPixmap]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV13QCPItemTracer[_ZTV13QCPItemTracer]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV13QCPItemTracer[_ZTV13QCPItemTracer]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV14QCPItemBracket[_ZTV14QCPItemBracket]+0x60): undefined reference to `QObject::connectNotify(char const*)'
build/moc_qcustomplot.o:(.rodata._ZTV14QCPItemBracket[_ZTV14QCPItemBracket]+0x68): undefined reference to `QObject::disconnectNotify(char const*)'
collect2: error: ld returned 1 exit status
make: *** [10k-Qt] Error 1
home@home:~/10k-master$

There are more than that, but there are mor than the 64000 character posting limit. When I tried using QT creator it said that there were like 2500 errors or something crazy. If I delete the folder I extraced from the zip and try QT creator again, It will seem to work, But when I try to run it I am met with....

A fatal error occured. 10k can no longer continue safely and will quit.

EXCEPTION: 11DbException      
DbEnv::open: Invalid argument      
10k in Runaway exception      

[iGotSpots]

Keep trying to open it if you get that error

[iGotSpots]

Hello, can anyone help me get this wallet installed on Ubuntu? I just keep getting undefined reference errors. Am I ,issing something?

Paste the errors, please

A fatal error occured. 10k can no longer continue safely and will quit.

EXCEPTION: 11DbException      
DbEnv::open: Invalid argument      
10k in Runaway exception      

This one. Try running it with no wallet

[TrialByError]

Hello, can anyone help me get this wallet installed on Ubuntu? I just keep getting undefined reference errors. Am I ,issing something?

Paste the errors, please

A fatal error occured. 10k can no longer continue safely and will quit.

EXCEPTION: 11DbException      
DbEnv::open: Invalid argument      
10k in Runaway exception      

This one. Try running it with no wallet

If I keep trying to open it I keep getting the same error. Lots of tries, and several reboots, same results. How would I go about running it with no wallet?

[rhegie13]

Spots, I have not received any stake for almost 24 hours. It's odd. Please advise.

[vegasguy]

You may have low coin count. Many of us are 1MIL coins +, so if you have say under 100k, that could be the issue. You are competing for POS blocks against everyone. Not saying this is the problem, but if you have under 100k , it is a strong possibility.

Vegas

[rhegie13]

You may have low coin count. Many of us are 1MIL coins +, so if you have say under 100k, that could be the issue. You are competing for POS blocks against everyone. Not saying this is the problem, but if you have under 100k , it is a strong possibility.

Vegas

I see.. I have 320k..

[natmccoy]

I downloaded the wallet but have 0 connections to the network  

Edit: Maybe I'll just use one of the pools, I've never used a staking pool before...

Edit2: It seems none of the pools work, only the suprnova pool provides a valid page but says it's in maintenance mode. These issues do not make this coin attractive to investors.  

Edit3: Were the pools only for PoW and not PoS? That would make sense why the links don't work but they should be removed. Now to figure out why I have 0 connections to the network.

[TakeItEasy]

I downloaded the wallet but have 0 connections to the network  

Edit: Maybe I'll just use one of the pools, I've never used a staking pool before...

Edit2: It seems none of the pools work, only the suprnova pool provides a valid page but says it's in maintenance mode. These issues do not make this coin attractive to investors.  

Edit3: Were the pools only for PoW and not PoS? That would make sense why the links don't work but they should be removed. Now to figure out why I have 0 connections to the network.

Put these in your 10k.conf file

addnode=98.174.25.33:11082
addnode=23.92.61.98:11082
addnode=104.236.222.217:11082
addnode=37.59.18.108:11082
addnode=94.190.246.163:11082
addnode=96.236.59.185:11082
addnode=81.152.225.30:11082
addnode=81.164.5.200:11082

PoW stage is over long time ago. Only PoS now.

[natmccoy]

I downloaded the wallet but have 0 connections to the network  

Edit: Maybe I'll just use one of the pools, I've never used a staking pool before...

Edit2: It seems none of the pools work, only the suprnova pool provides a valid page but says it's in maintenance mode. These issues do not make this coin attractive to investors.  

Edit3: Were the pools only for PoW and not PoS? That would make sense why the links don't work but they should be removed. Now to figure out why I have 0 connections to the network.

Put these in your 10k.conf file

addnode=98.174.25.33:11082
addnode=23.92.61.98:11082
addnode=104.236.222.217:11082
addnode=37.59.18.108:11082
addnode=94.190.246.163:11082
addnode=96.236.59.185:11082
addnode=81.152.225.30:11082
addnode=81.164.5.200:11082

PoW stage is over long time ago. Only PoS now.

I appreciate the fast help. I do not see a .conf file viewing the folder in winRAR, only .exe and .cpp, I apologize for my incompetence.

[TakeItEasy]

I downloaded the wallet but have 0 connections to the network  

Edit: Maybe I'll just use one of the pools, I've never used a staking pool before...

Edit2: It seems none of the pools work, only the suprnova pool provides a valid page but says it's in maintenance mode. These issues do not make this coin attractive to investors.  

Edit3: Were the pools only for PoW and not PoS? That would make sense why the links don't work but they should be removed. Now to figure out why I have 0 connections to the network.

Put these in your 10k.conf file

addnode=98.174.25.33:11082
addnode=23.92.61.98:11082
addnode=104.236.222.217:11082
addnode=37.59.18.108:11082
addnode=94.190.246.163:11082
addnode=96.236.59.185:11082
addnode=81.152.225.30:11082
addnode=81.164.5.200:11082

PoW stage is over long time ago. Only PoS now.

I appreciate the fast help. I do not see a .conf file viewing the folder in winRAR, only .exe and .cpp, I apologize for my incompetence.

You have to create it here
C:\Users\YOURUSERNAME\AppData\Roaming\10k

Open notepad, add nodes than save like all files, name 10k.conf, restart wallet.

[Pab]

You may have low coin count. Many of us are 1MIL coins +, so if you have say under 100k, that could be the issue. You are competing for POS blocks against everyone. Not saying this is the problem, but if you have under 100k , it is a strong possibility.

Vegas

I see.. I have 320k..

320 is ok,maybe you need to reset your coins,did you try to send to other  adress in your wallet

[natmccoy]

Why is the .conf file not already included with the download and why are the instructions not in the main part of the first page of this thread?

Anyway, I got it to work, Thank you very much  

Edit: Now it's fluctuating between 0 and 1 connection, not syncing and says "WARNING: Checkpoint is too old"

Edit2: The warning is still there but I now have 3 connections and it is syncing, looks like I'm good. Thanks again for your timely responses.

[TakeItEasy]

Why is the .conf file not already included with the download and why are the instructions not in the main part of the first page of this thread?

Anyway, I got it to work, Thank you very much  

Edit: Now it's fluctuating between 0 and 1 connection, not syncing and says "WARNING: Checkpoint is too old"

Edit2: The warning is still there but I now have 3 connections and it is syncing, looks like I'm good. Thanks again for your timely responses.

You are welcome

[fmz89]

now 76 satoshi 
wait for 1 satoshie

[vince232]

now 76 satoshi 
wait for 1 satoshie

Whats next after 1 sat?

[Arie22]

now 76 satoshi 
wait for 1 satoshie

Whats next after 1 sat?

Panic sell 

[vince232]

now 76 satoshi 
wait for 1 satoshie

Whats next after 1 sat?

Panic sell 

that is if there will be buy orders at 1 sat

[MisterGreen]

now 76 satoshi 
wait for 1 satoshie

Whats next after 1 sat?

Panic sell 

Hasn't that already began?