ANTMiner R1 Wifi Router - .185 BTC Status: Open - In StockPayment Address: 1N7PY23XqPDCHopBkghDfdGNxuyDppK5zLI have a small batch of AntRouter R1 units I'm offering for group purchase. Buyer provides shipping label or shipping payment. Weight is 7 oz and can fit in a first class padded envelope for $2-$3. Source shipping zip code is 75013   Custom Firmware!Custom firmware can be loaded upon request. However, please note that loading custom firmware will void all warranties. Custom firmware includes: - Configuration for up to 4 pools with full Bitmain solo mining support. - R1 Frequency and Voltage modulation (Use at your own risk) - Detailed R1 stats page, including pool statistics    I will never solicit you via PM for payment, watch out for scammers! |
|
|
|
What kind of plug comes standard on the R1? Any other sources for the US adapter since it's sold out on Bitmain?
You can get them on ebay for around $1 shipped from China. Might take a while though. |
|
|
|
|
I have a limited supply of Compacs for sale. I am also selling discounted RPIs with Minera, bfgminer, cgminer-gekko, and ckpool preinstalled. Discount only availavle for Compac orders.
ASICPuppy.net
|
|
|
|
ASICPuppy.net In Stock Miners! All orders ship within 24 hours, Mon-Saturday. Purchase Online: ASICPuppy.netIn Stock:ANTROUTER R1 - 5.5gh/s+ (Custom Firmware Optional) GEKKOSCIENCE COMPAC BM1384 STICKMINER ANTMINER U3 - 63gh/s ATX Breakout Boards from Rockminer Rockminer USB Hubs Antminer PSU Jumper Switch Raspberry Pi B and B+ with custom build of Minera A10 Cubie with custom build of Minera Please contact me if you are interested in local pickup (Dallas). I'm also open to buyers printing their own shipping labels. If you print your own label, you are responsible for insurance and any damages incurred from not insuring the delivery. Units are in stock with a limited quantity available. First come, first serve.
|
|
|
|
I have a limited supply of Compacs for sale. I am also selling discounted RPIs with Minera, bfgminer, cgminer-gekko, and ckpool preinstalled. Discount only availavle for Compac orders. ASICPuppy.net |
|
|
|
|
I have a few S7s in hand that I'm willing to sell at purchase price. They are a bit louder than I had hoped.
8.12 BTC each plus shipping.
PM if interested.
|
|
|
|
I have a lot of EVGA 1300 G2's so I swapped 1x single pcie for a branch pcie and used a $6 splitter on another of the single pcie. I would recommend getting your splitters on amazon before they sell out. You will need 2x of them in addition to the standard G2 cable set.  Have you tried just using 2/3 pcie connectors on each board? |
|
|
|
|
What a beast! Wish I could run one at home. Perhaps if I switch it out with my AC unit...
Looking forward to an SP40 with lower specs and buyers remorse on my S7s.
|
|
|
|
When you are having to restart is it just restarting the cgminer? Or do you physically have to power the U3's?
I'm hoping the first if so I might be able to write a batch file for it. If have to physically power the U3's the batch file would do no good.
You have to physically de-power the U3 (both usb and 12V). Unplug, count to 5, plug back in. Sometime I had to do that more than once to get them going again. This is not the case for me. I just have to unplug and replug the usb port only. Someone in this thread mentioned disabling the usb port with a script via the OS then re-enabling it. |
|
|
|
|
I think the PSU makes a big difference as well. There is some quality variability on the PSUs sent from Bitmain, but I've noticed that the units I have running with their PSU zombie out much more often than the units I have running off of an ATX breakout board and corsair PSU. I like the idea of a script that disables and re-enables the USB port.
|
|
|
|
|
I've got two Prisma 2.0 units available. 1BTC each, shipped
|
|
|
|
so have any of you guys got the correct adapters so i connect these boards to a Pi.
How reliable are these boards ? wasnt there a recall due to them not performing well or at my boards at v1.2 a good revision ?
cheers
Looks like a Prisma 1.0 board to me. Send me a PM if you are interested in an adapter. |
|
|
|
Ashes to ashes, dust to dust transactions.
"Let us commend him to the mercy of Bitcoin. We therefore commit his conscious to block 2739337" |
|
|
|
|
By 2060 we should be able to upload our consiousness to server farms where we can live forever digitally. Around the same time, Bitmain will be releasing the S2000, for 18.6 million USD(inflation...), which will allow miners to live inside the blockchain. Buyers of the S1999 will be offered $100 coupons.
|
|
|
|
|
I don't think a standard cp2102 adapter works with prisma boards. I have a few ASICMINER adapters left over, and I think sidehack/novak still have some of their custom made adapters available.
|
|
|
|
|
If I remember correctly, these are just Prisma 1.0 boards in a rack-mountable enclosure. If that's the case, you should be able to use a uart adapter and mine off an rpi. See if there is a version number on the top right of your hashing boards. Should be 1.0,1.1,1.2 or something like that...
|
|
|
|
|
I can do $700 plus shipping for a 5 cube Neptune. Also have a couple prisma 2.0 units (1.4 th/s) I can sell for .9 BTC each plus shipping.
|
|
|
|
|
1 BTC Bob
1 crazyguy 1EbmRs3iBGcKJPoprSa4Vqkat6HizqgGet
|
|
|
|
|
Show Posts
