If you are going to provide this "service" for everyone, you should at least obey the GPL, fork this, and post the source code along with the binaries. You cannot change the code and only provide binaries.
Who's going to stop him? The open source software police? Interpol? The Avengers? Well, downloading something that is open source without available source code is kinda dangerous always. I don't know this guy so he might be trustful. But there are also guys I think it was some russians, that they edited PBE 1.6 and it was stealing something or changing wallet address after copy paste or something like that. And believe me some of my customers also send ETH to different wallets even in e-mails and orders was my wallet due to that paste trojan or whatever is that. Without source codes you can mine to OP wallet without knowing it... Not saying it does, but there is most likely something shady without any source codes released. |
|
|
|
I'm buyed to PBE 2.2 and waiting licence key and curiously about it  E-mail me. |
|
|
|
Anyone mining CryptonightV1/MoneroV7 with nVidia GPUs? I know it's not been very profitable historically... but maybe with the ETHlargement pill? Does it provide any boost on CN? Are you using XMRstak?...
Hi Mike, well Nvidia might be better for CN-Lite or even better for CN-Heavy. It has better ratio hashrate/power consumption or I think it has. About the largment thing you need someone with 1080, you may try to join the CN mining Telegram group, they will give you link in RYO telegram. |
|
|
|
And again... this is not support thread for mining-bios.eu Write me via e-mail. The Hynix text is just typo, it should be Micron, timings are proper Micron. It's fixed in latest version which should be available in few days. If you can't even boot with that bios, it's not timing problem. Boot in safe mode with iGPU and flash the card to stock bios. |
|
|
|
Hello!! Thanks for the instructions!! Is it possible to use ddu? Can it be used only in safe mode? Thanks for the replies.
DDU can be used in either 'normal' mode or safe mode, but it is recommended to use DDU in safe mode to ensure all video drivers are deleted. DDU used to have (still has ?) an option to restrart and run in safe mode, but the last time I ran DDU it never gave me this option and I had to start safe mode manually. Normal mode is fine for AMD even better if you use iGPU as your primary GPU for monitor. They deleted that option from DDU it wasn't well coded, hold shift when you click on reboot option in start menu. https://support.microsoft.com/help/12376/windows-10-start-your-pc-in-safe-mode |
|
|
|
I paid for PBE 2.2, and I didn't recive license key.
...
Any1 had problems with this side, did I lost my coins?
No you didn't. He must just be busy. He is a reliable guy and is very active on these forums. I can't speak for him, only from my experience. You should get contacted in the next day or two. He may not be working this weekend. Yeah, you are right, I'm enjoying my free summer weekends  Guys pls if any problem with orders use my e-mail monerobiosedit@gmail.com, this is not support thread for bios shop, only for bios modding from first post and bios, drivers, etc related problems with mining. Don't expect 24/7 support, the amount of e-mails I'm getting is way lower last months, but at least I have more free time. I do this as my hobby. |
|
|
|
I've got the same e-mail that they will send asap |
|
|
|
So next week should start shipping, right? I hope it will come soon and without customs  |
|
|
|
Hi
I have just purchased PBE 2.2
please what is the difference in PBE between [powersave] and [OC and undervolting] options ?
Thanks !
I read all the pages after this post and didnt find the answer. It will be really good to know the difference. This is not support thread for PBE or any bios bought on shop, use monerobiosedit@gmail.comDifference is in applied voltages and clocks, powersave applies lower voltages and clocks. For best performance you need to fine tune the GPUs, check in HWinfo for memory errors when OC. It depends also what miner you use it might need config too. |
|
|
|
Hi. You can use bxb-miner and evaluate it. And also we started a bixbite public test. We will be happy if you take part in it "Without Dev fee ! Not a fork of any miner software!" That is nice, but you use Wolf's kernel, right? You still need publish source codes. It seems to be based on SGminer sources. I have 2 questions this first I just started using xmr-stak on my 470/570's is it better to use 2 threads or 1 there's mixed opinions just wondering I'm using 2 on bittube but should I switch to 1 if mining can heavy. The second I was checking out your bios mods and didn't see any for MSI rx470 4gb or 8gb I have hynix and Samsung on the 4gb and micron on the 8gb, would they be included in your PBE PBE 2.2 supports all known memory types. Bittube is it IPBC? Not sure with their own algo, but you can try which one gives you better hashrate. |
|
|
|
Anyone found solution for incompatibility between ati flasher and latest win 10 version 1803 update? (other than not updating windows ) Yeah, roll back the update Hi, thanks. Best to check with SRB Polaris to be sure it's the same. Names of the bios aren't always right, mostly OC and non OC version might be wrong named. But I see listed only 8GB bios for all of them so it won't work for you. If you plan to buy the 5 bucks bios you can pretty much do it with this tutorial or any other that uses performance timings or if you want a better timings buy PBE 2.2. |
|
|
|
Being fair we don't need exchanges at the moment, no one sell or buys since the team's marketing strategy is a rather urges and obviously they aim to release the product first. For me I'd prefer to see a huge partnership related to e-commerce or some huge agency.
I think after the platform launch, then we will see some price movement and some good volume with the token. Since then, we can only wait. Yesterday it was 1 milion USD 24h volume on CMC. There is very low supply on HitBTC so if somebody would need Sether for campaign the price will go up very fast. |
|
|
|
Is there sense to mine this coin or not? I have a 3 rigs (1060x6, 1070tix6 and 1080tix4). Or better to mine something else? for example zencash?
Sumokoin is more profitable to mine than monero and currently one of the most profitable coins to mine (more than Zencash), so yes, mine Sumo - https://sumo.fairpool.xyzYeah, but do not mine on fairpool. |
|
|
|
I've just build my second rig using 8x RX 470 (Samsung) and stock hashrate was like 21Mhs. After using the paid polaris 2.2 (thank you Mattthev) the hashrate increase slightly like 1-2Mhs. Then I adjust clocks (Core 1050 / Mem 1900) and I am getting 27.1Mhs.
If i try to adjust the memory higher like 1950+ the system will crash and restart miner many times, it's not stable. If i adjust mem to like 2000+ I get invalid shares.
Are you still achieving 30+ Mhs on the RX 470 (Samsung) cards?
I downloaded original bios, loaded into the paid Polaris Bios Editor 2.2, patched for power saving OC and applied... saved and loaded the mod bios.
Did I miss something?
Is it mining card? Samsung type ending FE or FC? Write me to my e-mail. You need the other Uber-mix not the 3.1.1. Also don't forget use the latest Adrenaline drivers and switch to compute workload. |
|
|
|
Hi. You can use bxb-miner and evaluate it. And also we started a bixbite public test. We will be happy if you take part in it "Without Dev fee ! Not a fork of any miner software!" That is nice, but you use Wolf's kernel, right? You still need publish source codes. It seems to be based on SGminer sources. |
|
|
|
Mají různé skupiny např. Bitcoinoví gambleři a spekulanti, ale nezdá se mi, že by se nějak zajímali o start-upy, ICOs apod..
Ten tvůj podpis a logo vypadá úplně jako... https://youtu.be/61i2iDz7u04?t=15s |
|
|
|
The team might be slow in implementation of the promised website and do not make much announcement as required but the point remains that they are not folding their hands and waiting for magic or miracle to happen. Selling at this point is a total rekt decision for me. All we need to do is to encourage them to speed things up a little bit and be more engaged in PR and marketing. I read where someone made a recommendation about updating the title of the thread to remove the [PRE-ICO] part and up till now it has not been corrected. Now that's a little sloppy for me or they stopped checking this thread since after ICO. They need to be reminded of the importance of a ANN thread on bitcointalk
yes this is not the first project that does that, after the ICO, forget about this forum and do not spread the news here and answer our questions! I wrote about the title on Telegram they said that somebody is aware of it or something like that. It has been at least week and no change... I don't know what is so hard, it is like 15 minutes job to delete useless parts and put there some new info from their website. |
|
|
|
Is anyone CPU mining is so what are your rates I like to cpu mine with the fx8350 I have on my GPU rigs just don't know if it's worth trying cn heavy
CN-Heavy is not really good for CPU mining. You should mine CN-Lite instead like Aeon or IPBC. https://github.com/IndeedMiners/xmr-aeon-stak/releases |
|
|
|
|
Show Posts
