Try these setting "hexminerm-options" : "4:1016", "hexminerm-voltage" : "805", "hexminerm-chip-mask" : "15", "hexminerm-hw-err-res" : "50", "hexminerm-nonce-timeout-secs" : "20", "hexminerm-pic-roll" : "90", "hexminerm-reset-below-threshold" : "10", "hexminerm-reset-wait" : "600", i belive it is a hardware failure same nonces and chips not hashing at all Try "hexminerm-nonce-timeout-secs" : "600", If still fail, you need to request RMA.
|
|
|
Selamat buat agan dbshck. Mudah-mudahan bisa segera di lantik.
|
|
|
Try these setting "hexminerm-options" : "4:1016", "hexminerm-voltage" : "805", "hexminerm-chip-mask" : "15", "hexminerm-hw-err-res" : "50", "hexminerm-nonce-timeout-secs" : "20", "hexminerm-pic-roll" : "90", "hexminerm-reset-below-threshold" : "10", "hexminerm-reset-wait" : "600",
|
|
|
Hello everyone. I have a problem that my friend google hasn't been helpful with. If I point chrome or firefox at my miner's ip addresses they come up as a blank pages. Not titled blank page, just a blank page. If I follow the addresses with /cgi-bin/luci I get what seems like a backup interface. Firefox worked for a short time but then quit. How can I get my browsers to display the GUI correctly? Any help would be appreciated.
If you sure that is the right ip, the try to clear your browser cache.
|
|
|
Wah keliatannya calon kuatnya udah keliatan Visi & misi udah di paparkan dengan jelas. Tinggal mufakat aja nih.
|
|
|
I have a 4mb DSL. I am getting in 2 week 50mb fibre. Then that should solve the problem - I hope.
It's had nothing to do with your connection. You can archive smaller number by downclock the setting.
|
|
|
OK so I have a usb block erupter and downloaded cg miner v3.2.1 extracted it created a bat file and named it Startmining.bat so it would save as a .bat.
I input cgminer.exe -o stratum+tcp://my.pool.3333 -u UserID_worker -p **** --disable-gpu -S all This does not work do you have any help on this?
EDIT: I have MultiMiner but that is bringing up 10mh/s average even though it says 336mh/s when bought could you explain this?
Download the latest cgminer, your cgminer is very old. You need to use powered usb hub(a good one) since it's draw more power. Of course even if you can draw 336MH, you won't get any share with today difficulty.
|
|
|
need help, you've send me yesterday my tracking number of my three hex4m but on speedy tracking says it doesnt exist... can you verify if the number is correct 60168605031 order THIFVNNBU
my tracking number still doesnt exist please check it with speedy You can ask speedy about the tracking id from: http://www.speedy.bg/begin.php?page=spd_Opinions&lang=en My tracking number appear today as canceledwhats going on, wont they ship it?!! You can ask speedy from that form. They will tell you the reason.
|
|
|
Hello i have 2 hex4m boards that i aquired in february 2014 after a long wait my boards have arrived finally and i got them plugged in to recover a little bit of my loss one of the boards was hashing at 250gh with some nonces after reading a bit i got that fixed by cleaning the minion chips and adding some thermal grease now is working as a charm second miner is refusing to hash i did the same operation as the 1st one and the speed i get is 2 3-gh and alot alot of nonces
Did you used the same config file? Please post your config file.
|
|
|
I is still in bits i wonder what will happen if i power down again !!!!
Is it really critical to get a code 10 sd card ?
If so i will update miner to latest files etc, then create am image and put it on one as a spare...
1 - does the card have to be removed from unit/plugged in pc to create the image or is there a 'back-up' menu in the miner interface ? 2 - what program do you recommmend to create the image.
cheers
If you didn't move the miner, i guess it's will be alright Otherwise just pull out the blade again You need pc to write the image. If using windows, Win32DiskImager is the choice.
|
|
|
The miner maybe use static ip. You should ask the seller about the ip.
|
|
|
At this point the OP says the unit is working.
Ahh, sorry. I didn't read the thread carefully
|
|
|
I have about 110k of stale shares after mining for 3 days non-stop. Is this normal?
For 3th I am getting 0,005 btw per block found. Am I getting a fair pay out or am I doing something wrong... Maybe my internet connection stinks...
Regards,
Nikolas
How many your accepted shares?
|
|
|
Check if there is any loose connector. Clean all accumulated dirt.
|
|
|
need help, you've send me yesterday my tracking number of my three hex4m but on speedy tracking says it doesnt exist... can you verify if the number is correct 60168605031 order THIFVNNBU
my tracking number still doesnt exist please check it with speedy You can ask speedy about the tracking id from: http://www.speedy.bg/begin.php?page=spd_Opinions&lang=en
|
|
|
Yes in noticed after some googling that the SATA only 1 pair. I used 1 x corsair cx600 to power 2 x s1 antminers (underclocked) with the total what of 480. You don't need google for that information. It's was obvious from the color, there is only 1 yellow wire there.
|
|
|
The coin was deposited into my account. When you begin the weekly campaign please count me in!
You need for re-enroll once the weekly bot launches. Post until then won't count.
|
|
|
Thanks. I'm traveling so I dont want to mess with what seems to be working right now. After some fooling around I've had to hard reset the miner and cant do that from where I am at the moment.
Does Marto work for Technobit? I'd hate to bother the guy otherwise.
Marto is the owner This is as far i can help you since i don't own hex4m I had hex16a, hex16c & hex8. Software setting is similar, but the led indicator is different. So marto can explain more
|
|
|
... LOL, speedy tracking number is useless. They only show pickup & delivered status Better ask magdalena for real tracking number. I'm not happy to disagree with you. The Speedy tracking number is not useless. If you log in to Speedy with these number you can find the international tracking ID next to the Speedy number. It is the number in brackets, directly over the list with Date, Operation and Settlement. Ok, to speak or write with Magdalena makes more fun. Who would not want contact Magdalena finds its tracking number on the above described way. It takes a little longer. Ahh, i never know we can login with the tracking number But deal with magdalena more fun
|
|
|
For me it was not possible to tracking my parcel until early Monday afternoon. The current tracking-ID is the Speedy-intern Number for parcels within Bulgaria. It is therefore quite possible that you can find the international tracking ID until Monday or Tuesday on the website of Speedy.
LOL, speedy tracking number is useless. They only show pickup & delivered status Better ask magdalena for real tracking number.
|
|
|
|