My package has not left Sofia for a couple days.  Is this normal?

what I am but wonder

when I log in (mr-3020)
under Status
Am I missing "status cgminer"

thank you that it was apparently

.......

Well, I tried both PCIe Ports and also CPU 4 Pin, but one board is still running at ~15GH.
In order to be sure, I tried the board alone, same situation as with all 3 boards.

I will try to get my hands on a second PSU, maybe it will help.
Thanks anyway

Marto, any clue?

Edit: I tried with an extra PSU (16A) just for this one board, same result

one day satoshi will return and demand licence fee from every greedy mofo on this forum...

get under SSH screen-r this error message

have HEX16A2
mr-3020 with FW 0.1.3

can someone please help me?

Tue Jan  7 12:55:44 CET 2014: cgminer exited status (1)
Tue Jan  7 12:55:44 CET 2014: Sleeping for 10...
Tue Jan  7 12:55:54 CET 2014: Starting cgminer
 [2014-01-07 12:55:54] Unexpected extra commandline arguments

Pi is totally stressed out with all 3 boards, not possible to get them up running.

On Ubuntu, I managed to get all 3 boards running, but after 8 hours, the PSU stopped, I guess it went in protection mode.
One board only ran with 15GH/s, so I guess it is not getting enough power and this caused that the PSU stopped.

Right now, this one board doesn't even start and shows 0 GH/s in cgminer.

My PSU (be quiet! Straight Power E9 700W ATX 2.31)  has 4 rails, but which rail do I have to use?:
I think at the moment I do have two boards connected to HDD wire, which I guess do not serve enough power

12V1-18A  --> HDD/SATA?
12V2-18A  --> 24Pin?
12V3-22A  --> PCIe1?
12V4-22A  --> PCIe2?

Anyone can help me, do you think this is right?

Help i just changed my ip adress on the mr-3020 to dynamic, how do I find out what ip to connect to?

And: I paid BJJNEKBIM   2013-12-13   581,00€   Bank Wire   Awaiting bank wire payment    - on the 29th of november with the correct iban and my order code in the information. Have you still not recieved payment? This is why I hate bank wire... You should accept paypal again!

What I don't understand is why everybody uses the tl-mr3020. I have four bitburners running on a Pi and 10 red fury sticks running on another Pi. Is there a problem with using cgminer on a PI with these HEX16A2?

Thanks
Lars

What is the best OC settings everyone has tested.

Hi, I have a problem again with my boards.

I had one board up and running since Christmas mit terminal screw.
Now I have received 2 addtional boards with molex connector.

I connected them to my powerd usb hub and PSU with seperated rails with each 18A, so enough power.

Cgminer on raspberry pi freezes immediatly as soon as i try to start it.
On Ubuntu, i can only start 2 boards, the 3. one will be shown as OFF in cgminer.
I already tried different USB cables.

Is it possible that this one board is broken or does anyone have the same problem?

best regards

Ok
I think it is because of the hub.
Check my posts about hub and check terminus site the only M tt chip is the 7 port one if I remember
In case if you wanna experiment more you can plug nanos in port 1 and two of the hub
Do you power your hub from psu?
Pshttp://terminus-tech.com/English/products.html

The black hub righ.? 10 ports?
You need the white one first chip should be 7 port tt
Anyway
Thank you for  the info

Most probably because of the USB hub. Is it a tt one?
Lsusb -v?

Bus 001 Device 021: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 022: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 023: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 024: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 025: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo

Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation.


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Thanks, it worked!!!
It is a real irritating mistake which cost lot of time to "solve". Just forgot the enable hexminera, but I am most certainly sure that I did try this, maybe only with version 3.8.1.

Thanks again!

Anyone can help me here ??

Happened today

When i try to acess ssh to tp-link router i make "screen -r" and it always shows black screen ? How to solve this ??

Are these 5v or 12v as the page did not have the information? Also is the noise difference that noticeable?

One last question what are you using for PSU as i have one powered by a bench supply (loud) and another on an old ATX PSU (Quiet). Waiting on some adapters so i can use ATX supply for both, it has a 36amp 12 v rail so should handle both fine and i'm  planning to use the another 12v connection as the molex wires are a little warm already.