I see lots of people getting the EVGA power supply, plus the G2 has a 10 year warranty on it and is less expensive than the RM1000 model. Anyone have or use the EVGA G2 1000 watt model?

What I can't find is the small adapter that you plug in so you can turn it on without the main board. With the RM1000 all I used was a 14pin plastic adapter with two pins added, but not entirely sure what this EVGA G2 needs. It has a 28 pin power connector, so having a hard time finding that little adapter you would plug in.

Hello, I have an antminer s1. It has been running fine for a few months now. While I was sleeping, I heard the miner make the beeping noise to signify that the internet was out. Decided to just deal with it afterwards. Well here I am. I restarted the device, and now it won't mine. There is a green light that blinks in one second intervals. On the mining status on in the web browser, it contains no values. Any idea on what the problem is? I tried restarting it from the browser as well. What can I try / test? Thanks for your time.

(OS:Arch Linux)
Hi I'm new to bitcoin
I installed multibit as my bitcoin wallet yesterday and now I want to mine some coins.
I tried bitminter but my GPU doesn't seem to support OpenCL.
so... I decided to mine with cpuminer and it requires server but I don't know how to turn multibit into server mode.

Read the topic.. S5 versus SP20. Where does an S1 come into this at all?

Both miners are newer generation and will under clock well for more efficiency. I would base my decision between them on purchase price.

So I am doing mods to some mining equipment and I was looking at purchasing one of those common Infrared thermometers but is there a better one I could use ? I am replacing fans for the most part so I just need to make sure chips aren't running too hot, if anyone has a good link please let me know!

hey everyone, i just got my antminer u1 up and running as a test rig to make sure i could get all my account and wallet settings etc, before i bought a stand alone unit.  it worked for a little while (slowly, but obviously expected) but when i disconnected the U1 to move it to a different USB slot and restarted CGminer i cant get it to run again. i dont think anything changed so could anyone tell me what im doing wrong please?  here is the cgminer window

I was able to get bfgminer running and now I don't receive any error messages but there are no devices found. I have two asic but since I can't install this driver I can't tell bfgminer what com ports to use.
Every tutorial I've watched points to this one driver but does this driver have any prerequisites that I am not aware of?


https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

So, I purchased a Butterfly Labs Single @60Gh/s off of Ebay a while back. I have it set up to intake air from outside in the winter and expel air outside in the summer. currently it is expelling air.

I have the power supply set up and on and a mini USB cable plugged into the miner,climbing a slope, plugging into a USB extender, the plugging into my computer's back USB slot (USB 2.0).

I am using EasyMiner currently but have also used BFGminer.

On EasyMiner, after 10-36 hours the hardware speed and temperature will freeze, not moving from their last recorded points.
Attempting to restart the miner will give the status as "starting miner" for an unlimited amount of time. it will not work even if closed and reopened.

On BFGminer, after the same time (10-36 hours) the shares will stop going and the miner will indicate something about a temperature indicator not responding and that it is declaring SICK.
SICK will display in the top left corner of BFGminer. If i close BFGminer then when i open it again it only says BFGminer and the version and doesn't go past that, even if i encountered the error on EasyMiner.

 the Eclipse MC dashboard reports 0 Gh/s and no new shares since that point on both miners.

The issue only resolves itself if i restart my computer. then it mines 36 hours and dies again.


Any help is most appreciated.

Hello guys

Im new to this,
Anyone can tell me in detail how i can earn some ok money just doing this for hoobby ?
I have free power due to a solar park i own.

So i need some good details on how i start doing this what should i buy what should i do etc.
I just need it for hobby and to earn some extra cash.
No need to spend a lot though

Only answers that can help me.
Thanks a lot

Do you know if 1 pair of yellow/black from pci-e will be enough?  Two pair?  Says it needs between 7v-26v DC.  Thanks.

First off, I hope I'm in the right place asking these questions.  I'm trying to get BFGminer working but I can't get this driver to install. I've tried running as admin, I've turning off all antivirus and firewall possibilities, I've tried unzipping through multiple programs, and I've tried getting the drivers through different sources. Still no luck. Do I even need it? I open bfgminer and put in all my pool info and try to launch it just crashes. A message pops up but disappears to quickly for me to read it.

1. Why can't I install the driver?

2. Is it the cause of bfgminer crashing apon launch?

Hi, Im new to bitcoin mining and I would like to find out the methods of bitcoin mining. Do I join a pool, or I have to buy hashes on private websites and actually rent a mining machine in order to mine? Can I have some tips
Thx 

So there's general agreement on Dbshck? Please reply on English.

Just ordered the mother of all usb hubs, if they don't work with this then the hub ain't the problem:


https://www.usbgear.com/computer_cable_details.cfm?sku=USBG-7DU2&cats=104&catid=187%2C188%2C104%2C653%2C210%2C212%2C433

I will research, thanks.

Yes, I have them running off a 850w psu with an S1, thanks.

...

Tryed that too and there is no actual change, with the way that technobit answer to their émails  ( allready sent 2 mails and contacted marto on thé forum and still no answer) I think I Will have a "huge" delay in sending back thé unit and reciving à new working unit.

How would I go about doing that please?  It's an Ensignia brand from BestBuy, model number NS-PCH5421, 4-port USB 2.0 hub.  5vD.C. ~100mA, thank you.

I've had great success running one of these units.  I have it on a powered USB 2.0 hub and use a molex 4-pin to barrel plug of the 850w psu my S1 uses.  Using cgminer 4.90, 775v 237.50mhz gives me a super stable ~57.5gh.

Did you ever try getting more than one running at the same time?  I bought two more U3s, but I can't get more than one of them to run at the same time; any of the 3 run fine by themself.  Using stock volt/freq for all of this, I've tried launching cgminer with 2 plugged in at the same time and I get constant LIBUSB from both devices.  If I unplug one the other runs just fine.  If I launch cgminer with just one running it hums along perfectly, then I'll hotplug the second one in and instantly the LIBUSB errors start.  I've tried with them both plugged into my powered USB 2.0 hub, and tried with one in the hub and the other in a separate USB port on my computer, but no matter what if more than 1 is plugged in I get LIBUSB errors.  Any ideas?