I'm curious, how this work at all if like 30 people overall are mining it?
|
|
|
Paste the timings, I am too lazy to download the bios and extract them ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing? I used that bios, but modified card...put some arctic cooling thermal paste on memory instead crap that Gigabyte put on it...now working on more aggressive timings to see if I can achieve same hash results with lower speeds, as 2300MHz is a bit unsettling, plus requires higher core speed and voltages too (so higher power consumption and temperatures) I don't see anything changed besides you've used strapmod to null tFAW/t32AW and ACTRD at 16 cycles. May be if you try loosening the timing you might actually go above 16 stable, mine are sapphire's with micron and do 15.3 on linux(15.7 windows) at 1124/2150, too bad sapphire uses cheap vrm and cannot undervolt it, I hope I get my hands on those gigabytes you have soon to undervolt the shit out of it ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) main problem for micron seems to be that lowering trrd to 5 drastically lowers max frequency. Also, can't find info anywhere about misc_seq8, do you have idea whats that used for?
|
|
|
Paste the timings, I am too lazy to download the bios and extract them ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing? I used that bios, but modified card...put some arctic cooling thermal paste on memory instead crap that Gigabyte put on it...now working on more aggressive timings to see if I can achieve same hash results with lower speeds, as 2300MHz is a bit unsettling, plus requires higher core speed and voltages too (so higher power consumption and temperatures)
|
|
|
No way its 30W, unless you mean what GPU-Z says In that case, I have 470H/s on Gigabyte Micron RX560 ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Good for you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) It would be if I'd be mining monero, but I'm mining expanse instead
|
|
|
No way its 30W, unless you mean what GPU-Z says In that case, I have 470H/s on Gigabyte Micron RX560 ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
I believe every epoch is 30,000 blocks and it takes 14-15s to solve a block, So that is a new Epoch every 4.8 - 4.9 days. 60 epochs left till DAG 95. Therefore Musicoin should be mineable on 2GB cards for another 291 to 312 days
Musicion will hit 2GB barrier at 11/FEB/2019, expanse will do the same in april 2026
|
|
|
You guys should hire someone to do PR, look at deeponion, you have better product, but whats the point if noone heard about it ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
To give real service, you must add something which cannot be bought or measured with money, and that is sincerity and integrity.
I don't know, man ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.pinimg.com%2F736x%2F99%2F64%2F39%2F9964395af1264fa652b6ae05fc8c4092--raptor-memes-philosoraptor.jpg&t=663&c=qKrQ1snvgCKuYQ)
|
|
|
Epoch 95 will be the last DAG 2GB cards can mine, I believe the current DAG is 35 for Music not sure what Expanse is currently at
24...it will take forever to get to 2GB ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ok lowered clocks to 850 but when I pushed 2000 and up locked up rig solid Also just checked Music is at DAG 35 Ive put the mvddc to 850 for the 560's and I am testing out 2050 now to see if it is stable. will know better in 24 hour if it makes it that far, have cclock at 1150 and cvddc at 900 currently with dcri 20 I am getting 14.2 per card ethash and 32 per card lbr Update: well that didnt last long card #4 crashed at 2050 memory clock Well, your comment about bad micron and at same time much cooler outside temperature than during august made me try to push micron a bit further: (accidentaly pushed ctrl+ break instead ctrl + printscreen, so real frequency was 2300, not 300 ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ) not much gain over 2230, interesting...one bad thing with micron is that it demands about 1200MHz core to go over 16MH/s So about 15.8MH/s seems like a sweet spot ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FbY52rCH.png&t=663&c=Ms1EGDeduncuSA)
|
|
|
Pretty low amount of EXP for sale on exchanges, I'd expect more demand....maybe its just bad timing, with general panic spreading around
|
|
|
Do we need to get an invitation for the discounted price?
I don't think so, you just have to buy some expanse (and hurry, because it has to be on your wallet, not exchange, so take transaction time from exchange to wallet into calculation ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) )
|
|
|
Epoch 95 will be the last DAG 2GB cards can mine, I believe the current DAG is 35 for Music not sure what Expanse is currently at
24...it will take forever to get to 2GB ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
My Asus RoG cards have one fan each and no addition power connector.
Are your 560's factory overclocks with increased voltage? sounds like it if they have dual fans and a power connector
Try lowering memory voltage to 850mV, memory actually spends lots of power on low end cards, and can cause problems in cards with no power connector I will try 850 this evening see what I get. I just had sort of an epiphany. I am mining Expanse and music coin currently with very low DAG's mid 30's (I am mining these as Block Chain official + Claymore doesnt work in windows 7 and all my rigs have windows 7) Also these coins currently are more profitable. Anyways I thought I would check online to see what 2GB 560's cost as those would work with these coins for close to another year. 4GB 560's here cost me close to $170cdn($145usd) However I can pick up @GB 560's OC'd daul fan models for $135cdn(108usd) and mine Music or Expanse, the ROI on them should be half decent if the value of these coins holds up. I am not sure what to do here. I would prefer 570s and 580s but the are super hard to come by and cost way to much now. I'm even planing to check how rx550 2GBs work with ecpanse (mining that instead ETH, too)...only problem I live in small town in 3rd world country so even those are hard to find at decent prices
|
|
|
My Asus RoG cards have one fan each and no addition power connector.
Are your 560's factory overclocks with increased voltage? sounds like it if they have dual fans and a power connector
Try lowering memory voltage to 850mV, memory actually spends lots of power on low end cards, and can cause problems in cards with no power connector
|
|
|
Bad straps? I have same card, Gigabyte with 2 fans and additional power connector, two are micron, two are hynix.
Gigabyte is cheating and put 6GHz memory factory overclocked to 7GHz on hynix based cards, while Micron ones got real 7GHz parts, hence better OC and hashing
I have tried the 1750 copy method for Micron Factory Straps and the one click optimal in polaris 1.6 Result if I clock 2000+ is the same a driver crash My Asus RoG cards have one fan each and no addition power connector. Gigabyte micron (disregard gpu speed and power consumption, this was just chasing the record ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ): ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F17xtApa.png&t=663&c=H5LKnKZ4XqSVxw)
|
|
|
Bad straps? I have same card, Gigabyte with 2 fans and additional power connector, two are micron, two are hynix.
Gigabyte is cheating and put 6GHz memory factory overclocked to 7GHz on hynix based cards, while Micron ones got real 7GHz parts, hence better OC and hashing
|
|
|
hi ı need help.ı have a gigabyte rx560 4gb hynix card.I modded the cards. but when you run it with Afterburner the computer turns off or error the global wattman. timing 1500> 2250. afterburner o.c. gpu: 1200; memory 1850; core voltage: -15 what I do wrong. eth 12,500 mh/s. and it's not stable. I did not find a timig mode. please help me.
Try that editor that summersideguy recommended thank you for helping. ı do this program.ı am happy ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Also note, I would forget about AB for clock settings and voltage settings. use the command line options that come with claymore. I find if I use AB that once in a while it gets all screwed up and puts my memory clock a lot higher then it should be and crashes my system, but if I use the -cclock -mclock settings in Claymore they were ok no weird glitches. My settings for my 560's with microm memory are as follows -cclock 1175 -mclock 1950 -cvddc 900 -mvddc 950 If my 560's had hynix memory I would go with 2050 for memory clocks but they have micron which is not as good as Hynix. I am getting 13.3-13.5 per card Ethash and 30-33 Lbr Funny, my micron is ticking happily at 2240MHz and 15.8MH/s
|
|
|
hi ı need help.ı have a gigabyte rx560 4gb hynix card.I modded the cards. but when you run it with Afterburner the computer turns off or error the global wattman. timing 1500> 2250. afterburner o.c. gpu: 1200; memory 1850; core voltage: -15 what I do wrong. eth 12,500 mh/s. and it's not stable. I did not find a timig mode. please help me.
Try that editor that summersideguy recommended
|
|
|
|