overclock options: I need to setup some clocks to 2050 or 2060:  AM overclock tool only goes to 2000 at memory:  Can you change this to acept higher values? AM is limited by BIOS of your GPU. So you must change your BIOS first and set a higher mem clock limit. Yes, Awesome Miner tries to detects the limits and use the limits reported by the GPU. For some GPU types this detection isn't possible and in that case Awesome Miner did have some internal limits as a fallback (and these are the only limits I can make more relaxed). You are fully correct that the GPU can be limited elsewhere (BIOS) and this also must be considered. |
|
|
|
overclock options: I need to setup some clocks to 2050 or 2060: AM overclock tool only goes to 2000 at memory: Can you change this to acept higher values? I assume this is for AMD on Linux. I will increase the limits in Awesome Miner but please note that depending on the GPU there can be limits elsewhere. |
|
|
|
Hi,
Is it possible to get awesomeminer to display gpu stats when connected to lolminer/phoenixminer using external miner function?
Awesomeminer displays hashrate but nothing else.
When using the External Miner concept, Awesome Miner can only display the mining details provided by the mining software. For GPU it can typically include the temperature, but not all details you get if the mining is fully controlled by Awesome Miner or Remote Agent. Hi Patrike, Lolminer for example provides most of the important gpu stats in json format: "Index": 0, "Name": "AMD Radeon RX 5600 XT", "Performance": 43.13, "Consumption (W)": 72.001000000000005, "Fan Speed (%)": 51, "Temp (deg C)": 57, "Mem Temp (deg C)": 88, "Session_Accepted": 52, "Session_Submitted": 52, "Session_HWErr": 0, "Session_BestShare": 930349369113, "PCIE_Address": "3:0" awesomeminer already display these stats if using the remote agent. Could we get them included when used as an external miner too? Awesome Miner was already reading a number of these properties for Lolminer, but was missing a few important like fan speed, temperature and power usage. They may have been added to the Lolminer API at some point. I will improve this in the next release. Thanks for your feedback. For Phoenix Miner via an External Miner I can already see the fan speed, hashrate and temperature reported for each GPU. Power usage isn't provided by the API. |
|
|
|
Hi,
Is it possible to get awesomeminer to display gpu stats when connected to lolminer/phoenixminer using external miner function?
Awesomeminer displays hashrate but nothing else.
When using the External Miner concept, Awesome Miner can only display the mining details provided by the mining software. For GPU it can typically include the temperature, but not all details you get if the mining is fully controlled by Awesome Miner or Remote Agent. |
|
|
|
Please, can you add a way to remote access linux rigs?
(Maybe integrating with putty?)
You can configure Awesome Miner to launch putty for the selected miner. Please go to the Options dialog, Rule section and define a new rule like below: 1) Description: Connect using PuTTY 2) Support manual activation via the toolbar: Yes (checked) 3) Action: Run executable Executable: C:\YourPath\putty.exe Parameters: [Host] Now you will have an Action menu in the toolbar where you can select "Connect using PuTTY" and Awesome Miner will launch Putty for the selected miner. |
|
|
|
Great tool but why I don´t get calculated profit with ETCHash?  The hashrate is already set under settings ...  Thanks! Its the calculation of EtcHash, which seems to be wrong right now.  I've updated the ETC calculation and pushed an update for it. Your Awesome Miner should automatically have it within an hour. You can also force the update by clicking "Update mining software definitions". Even if there are no new software definitions, it will also force a refresh of the coin calculations. |
|
|
|
Where PhoenixMiner 5.3b ? ETC HARDFORK!!!
Please upgrade to Awesome Miner v8.1.10 as there had to be a change to the Phoenix Miner integration to fully support EtcHash. |
|
|
|
|
Awesome Miner version 8.1.10
Integration
- Nicehash Octopus pool added
Mining software
- PhoenixMiner 5.3b including EtcHash support for Ethereum Classic fork
- Nanominer 3.1.2
- Gminer 2.33
- XmRig 6.6.1
- SrbMiner Multi 0.5.7
|
|
|
|
|
Awesome Miner version 8.1.9
ASIC mining
- Operations to pause mining and resume mining supports Bitmain firmware for Antminer S15/T15 and S17/T17
- Detection of Canaan Avalon 11-series miners and more exact detection of Avalon ASIC miners in general
- Display firmware version for more ASIC models on the Summary tab for the selected miner
- Improved hashrate display compatibility with custom Antminer Z11 firmware by FuddWare
Mining software
- Lolminer 1.16
- XmRig 6.6
- Nanominer 3.1.1
- T-Rex miner 0.18.11
- NbMiner 33.8
- SrbMiner 0.5.6
- TeamRedMiner 0.7.18
- PhoenixMiner 5.2e
Corrections
- Correction to setting Power mode (Work mode) for Antminer S17+
- Correction to license allocation for External Miners being changed to Disabled state
|
|
|
|
Not only Phoenix miner, also team red miner with xhv.
Can you please send me the Remote Agent log file (you can access it via the Awesome Miner toolbar Tools -> Log File -> Remote Agent). Contact form: https://www.awesomeminer.com/contact |
|
|
|
Hello,
I ahve a problem when runing miner as administrator.
If the miner stops and restarts, or if the pc stops and restarts, the software does not detect the running process and it tries to start another instance of the miner, after this the system locks.
I am running phoenix miner 5.2d.
Is it only for Phoenix Miner you run into this problem? Awesome Miner should automatically configure Phoenix Miner to not restart itself in case of crashes/issue, to avoid these kind of issues. Awesome Miner should automatically setup this by using the command line arguments "-wdog 1 -rmode 0". You can verify this using the Diagnostics button. |
|
|
|
Please, I want to upgrade my license becouse the feature that allows to chance clocks looks like very interesting. But I wanna know if it will work with AM + HIVEOS
(using linux remote agent) before I upgrade.
TKS!
Yes, it works. If you reach out to me via a private message or the web site ( https://www.awesomeminer.com/contact) and let me know your e-mail address, I can provide you with a time limited trial license where you can evaluate our software with all features. Thanks! |
|
|
|
I just finally got my stupid setup going on ubuntu 20.04.. Now when I try to connect to nanopool server i get
Eth: Could not connect to ethash pool eth-us-west1.nanopool.org:9999: Network is unreachable
I have internet
I tried other mining pools
Any help would be greatly appreciated
As this is P*****G me off
Can you please start the miner with the Diagnostics button in the Awesome Miner toolbar and share the output with me? I can then try to reproduce the problem with your exact configuration. Thanks! |
|
|
|
|
Awesome Miner version 8.1.8
CPU mining
- Improved display of power usage for CPU mining
Features
- Connection to Remote Agent can be tested via the Managed Miner Properties
Mining software
- Nanominer 3.1
- T-Rex miner 0.18.10
Corrections
- Improved EthMiner API compatibility
|
|
|
|
How can I change phoenixminer parameters on AM?
Parameters:
-cclock
-mclock
-fanmin
I am using HIVEOS + AM.
Already tryed:
1) Command line (After save, AM cannot restart the process of mining - Not allowed)
2) GPU clock profiles: Only if you pay another kind of license
3) Advanced then Variables: Not make efect
Please, someone can send me a print with an example showing how to add PM parameters?
You should be able to use #1 for adding custom command line parameters to Phoenix Miner. Can you please start the miner with the Diagnostics button and share the output with me? This should indicate why Phoenix Miner didn't accept your custom parameters. Thanks! this is the log: Initialize diagnostics (10) Starting Diagnostics (30s). Awesome Miner Remote Agent version: 8.1.7 OS: Unix 5.0.21.201105 GPU Details: GPUs: Prerequisites: Microsoft .NET Framework: 4.0.30319.42000 Microsoft VC++ 2013 runtime installed: No Microsoft VC++ 2015 runtime installed: No Microsoft VC++ 2017 runtime installed: No Microsoft VC++ 2019 runtime installed: No Starting Mining Software Setting up Miner Engine. Instance: 1 Engine Type: PhoenixMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: Properties: (WindowMode: ConsoleFormat, EngineType: PhoenixMiner, IsProfitMiner: False) ==================================================================================================== /root/.config/AwesomeMinerService/phoenixminer_5.2d_linux.tar_1/PhoenixMiner_5.2d_Linux/PhoenixMiner -fanmin 90 -cclok 1200 -cmem 2000 -fanmin 92 -wdog 1 -rmode 0 -cdm 2 -cdmport 4028 Configuration: POOL: eth-us-east1.nanopool.org:9999, WAL: 0x10a035bddc2d3a404860e918278cf375ae435793, WORKER: AM, PASS: x, PROTO: 2, ALLPOOLS: 1 ========== Configured command line: -fanmin 90 -cclok 1200 -cmem 2000 ==================================================================================================== Failed to start miner process: Process has exited, so the requested information is not available. Failed to start miner in Diagnostics mode Diagnostics completed Please check the spelling of "cclok" as it should be "cclock". I'm also not sure about what "-cmem" is? If it's the memory clock, please try "-mclock". If it still doesn't work, please try the following: cd /root/.config/AwesomeMinerService/phoenixminer_5.2d_linux.tar_1/PhoenixMiner_5.2d_Linux/
./PhoenixMiner -fanmin 90 -cclock 1200 -mclock 2000 -fanmin 92 -wdog 1 -rmode 0 -cdm 2 -cdmport 4028 Any errors? |
|
|
|
How can I change phoenixminer parameters on AM?
Parameters:
-cclock
-mclock
-fanmin
I am using HIVEOS + AM.
Already tryed:
1) Command line (After save, AM cannot restart the process of mining - Not allowed)
2) GPU clock profiles: Only if you pay another kind of license
3) Advanced then Variables: Not make efect
Please, someone can send me a print with an example showing how to add PM parameters?
You should be able to use #1 for adding custom command line parameters to Phoenix Miner. Can you please start the miner with the Diagnostics button and share the output with me? This should indicate why Phoenix Miner didn't accept your custom parameters. Thanks! |
|
|
|
Hi patrike.
With the last update if i use ethminer I cant see the hashrate. And I dont see accepted and rejected too
Which versio of EthMiner are you running? If 0.18, can you please go to the Options dialog, Managed Software section and try 0.17.1 as well? With gpus it always says interface offline whatever version i use but i have also fpgas fk33 mining eth which uses modified ethminer. and its api doesnt work too from the latest update The version of Ethminer you use is probably slightly different and I will have to look into it and make sure Awesome Miner can support it as well. Can you please send me the API report from this miner, via the toolbar Tools -> API Report. Please send me the report via PM or via our web site. Thanks! |
|
|
|
|
Awesome Miner version 8.1.7
ASIC mining
- Configuration of Power mode (Work mode) for Antminers running Bitmain firmware for S15/T15 and S17/T17
Features
- Trigger for Miner State can be configured with a duration the miner must be in the specific state before triggered
- Notes can be added to Miner groups
- Improved selection of Mining software to use based on detected nVidia CUDA version available
- Feature to send a ping request to a Remote Agent process and display the response time (toolbar: Tools -> System Tools -> Ping)
Mining software
- Nanominer 3.0.1
- Gminer 2.30
- T-rex miner 0.18.9, incl. use of new worker ID parameter
- PhoenixMiner 5.2d
- Miniz Miner 1.6w2
- CpuMiner-Opt 3.15.2
- Bminer 16.3.6
- NbMiner 33.4
- LolMiner 1.15
- XmRig 6.5.3
Corrections
- Correction to AMD Ryzen temperature display
- Correction to detection of AMD GPU memory on Linux
- Correction to AMD GPU name display on Linux
- Correction to display of coin value in the status bar for coins with only a USD value
|
|
|
|
Hi patrike.
With the last update if i use ethminer I cant see the hashrate. And I dont see accepted and rejected too
Which versio of EthMiner are you running? If 0.18, can you please go to the Options dialog, Managed Software section and try 0.17.1 as well? |
|
|
|
hi patrike,
any news about the ryzen cpu temp? no temps for ryzen 1x00 and ryzen 2x00 cpu´s. Mining software xmrig and srbminer multi.
I've not been able to reproduce this on my Ryzen 3000-series CPU. I have however added additional debug details for the next version to get a better understanding of the issue. Is the case still that you see the CPU temperature (both "Temperature" and "Core Temperature") in the System tab - but nothing on the CPU tab? Phönixminer 5.2c was released.
I've pushed an update with Phoenix Miner 5.2d now. Hi Patrike, i see only temperature in the system tab, core temperature show nothing, but the ryzen 1x00 and 2x00 has only 1 temp sensor. open hardware monitor only show 1 temperature for the hole cpu package, same in Coretemp and hwinfo also. Thanks for the update. I think I have isolated the scenario. Please let me know if the next release, planned for today, works better. Thanks! |
|
|
|
|
Show Posts
