Here we go! First 10 units shipping tomorrow! These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct. Enjoy...     |
|
|
|
About to test print the lid and possibly production ready revision to the DPS800GA breakout board enclosures. I've added GIGAMPZ to the lid. Pictures of the prints asap!  |
|
|
|
|
Just sold 2x DPS2kBB breakout board enclosures to a member from Norway.
Already had the 2 cases printed so they are shipping today!
|
|
|
|
What kind and how many miners are we talking about ?
I'm running Antminer U1/U2s for a total of 20 GH/s. Been running them since February and have paid for them already since I don't pay for power in my apartment. Check out Minera yo... https://bitcointalk.org/index.php?topic=596620.0 |
|
|
|
Oops, I am having problems with this unit, after reverting the fans it start hashing and when reach aprox. 542 Ghs the power supply stops.
I decide to place the fans the way was before and place the unit with the fans facing back where the room exhaust is, same thing, it reached 542 Ghs and the power supply stops.
I have a 600 W power supply around here so I connected the CX750M to the first 2 boards and the BXP600 to the 2 boards below, the power supply on the first 2 keep running but the BXP600 on the 2 below stopped. Looks like there is a problem in the 2 boards below.
I have to continue with this tomorrow, is late and have to rest.
At this moment reconfigured for 2 boards only (2 below disconnected) and it shows;
Try and test each board individually until you find the faulty board. Your CX750M will run a 4 board BTCGarden miner without any issues. I wouldn't doubt if the BXP600 PSU was causing the issues. |
|
|
|
Got it, that is where the "matte" come from, always wanted to go there, have a friend working in the nuclear plant in Perth. Hope some day will go there.
Yes indeed, Australia is a beautiful place and fun from what I gathered. The "mate" comes mostly from my sailor days where everyone was your "shipmate" or matey or mate...old habits die hard, haha |
|
|
|
New R-Box is in stock. Free RockMiner breakout board with each 4 units purchased. Free RPi and usb hub with each 8 units purchased Think you could snap a shot with a ruler or something to reference the size of the new R-Box miners? Super cool looking! |
|
|
|
Bump. Ordered a 2nd printer! I will be able to up my production and development as I won't need to stop printing orders just to test new products! Super stoked! Don't forget to check out my products for sale thread... https://bitcointalk.org/index.php?topic=694666.0 |
|
|
|
Just a quick peek at what I am working on for these PSU modular "racks"  |
|
|
|
Thanks bud, that will help!
Question, are you Aussie?
Nope, but I have traveled there during my time in the Navy. 3 days in port and 2 were on duty in Brisbane and spent all 3 days on duty while moored up in Perth  Can't wait to make it back someday and explore the land! |
|
|
|
That's smart. Yeh the fans are very easy to reverse. I've got a cold air source in front of mine, so my fans are reversed as well. That's a nice looking setup bob! [/quote] How do you reverse the fans? [/quote] I manually removed and flipped the 2 fans on one of my AM-v1 miners as they are mounted on some OpenBuilds 20x20 V-Slot http://openbuildspartstore.com/v-slot-20-x-20mm/I never tried messing with the polarity of the wires coming off the board. |
|
|
|
Do you have jerky without beef?
I am allergic to beef.
I will PM you some links on quality non-beef jerky....what meat is your preference? I can get almost any meat in a jerky just not all are gluten free so I am unable to enjoy them. |
|
|
|
Nice! Keep it up the Pi case with the LCD is great. The fan case works great.  More new products coming soon! I also have a 2nd 3d printer on the way so I can up my production and product development, stoked!
Thanks brother! I picked up another LCD so I can tinker with it some more...plus it was fun putting the LCD together. Snapping pics soon! |
|
|
|
Received my unit today 15 minutes to set it up with a CX750M. But is not hashing at all.  Everything goes to discarded. You do have the "Board Nums" in the config set correctly? edit: removed pics Glad you got it hashing mate! |
|
|
|
Fish has been beating just about everyone to blocks lately. But what else would you expect from a private Chinese P2 pool that has over 2 Exahash (that's 2004 Petahash). I believe their stated goal is "World Domination"
No that private...I am a registered DF miner but DiscusFish aka F2Pool is but my second failover pool. The webgui is very nice @DF I must admit! |
|
|
|
Next shipping dates Sept 2 and Sept 15,16. if anyone wants to get another order in.
I should have jerky available by October 5th. Any interest?
Thanks!
Paul A
Is your jerky Gluten Free? (I am HIGHLY sensitive to gluten products-wheat, rye and barley and their by-products) but I really like beef-jerky and immediately thought of making some with meat purchased from yoo but if your jerky is gluten free, I'd rather just buy that. I can also offer gluten-free alternatives to some ingredients used in making jerky if you like. Thanks! |
|
|
|
Nothing is showing orphaned on my end  |
|
|
|
Bump for an awesome seller. Bought a few items via their eBay store. Always fast shipping too!
I have been developing a case/cover for this slick little unit. I will hook you up with a free case/cover for reviewing.
Definitely post pictures! I'm sure people would love to have a case/cover for the unit. Damn, I lost this thread. Just found it today somehow. I never added it to my watch or notification list, which I've just done. Anyways, I will post up pics asap, I designed and printed a case not long ago plus I recently ordered 2 more units from your eBay store. Would've preferred to spend BTC but all good. The new board design is nice! I will be making any necc. changes to the design so I can print cases for the new versions. I will shoot you a few cases once I have the new revision finished up...you're right across the river from me Peace! |
|
|
|
|
Show Posts
