[ANN] LiteDoge - such Community coin | no premine | very fast | much profit

[crunck]

Oh, and my peers are

174.102.229.22:59888
174.102.229.22:59876

Edit. Stuck @ 137979

Passed on to devs

Thnx Mr. Crunck.

Deleted my the roaming folder. let's try resyncing.

Are these nodes ok?
174.102.229.22:59888
174.102.229.22:59876

from my console :
73.162.65.43:49294
46.59.58.142:17014
94.254.73.95:53875
192.52.167.140:17014
24.188.162.131:17014

[crunck]

I'm connected again and staked a few blocks.  My limited number of connections seem to be cutting in and out.  I will upload the blockchain if necessary, but I guess let's see if this works first or if it's necessary.

I hope bittrex has been notified because I see their LDOGE market is not frozen right now.........

All exchanges were told.

I am now synced up and am on 138344

Checking now to see if I am on right chain

edit i just took 138345

Status: 1/unconfirmed, broadcast through 3 node(s)
Date: 29/06/2015 14:32
Source: Generated
Debit: 0.00 LDOGE
Net amount: -269048.50 LDOGE
Transaction ID: 2caaebc1fde07c523937a447e7a593f00278675298f8c28304c5044cb55efb9e-000

Run the command 'getblockhash 138345' to see if we are synced.

I got c73e1d7b690a443314660b7b770bb38816a5ecfa90ad12ba6aeba3b2afeaa64a

I got:

14:40:04

3f8aa0c61d34fd996da1d0eb4044128360e47556444abb4a64b50e39a013f100


So we are on different chains yeah

[fpex]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

[SockPuppetAccount]

I'm connected again and staked a few blocks.  My limited number of connections seem to be cutting in and out.  I will upload the blockchain if necessary, but I guess let's see if this works first or if it's necessary.

I hope bittrex has been notified because I see their LDOGE market is not frozen right now.........

All exchanges were told.

I am now synced up and am on 138344

Checking now to see if I am on right chain

edit i just took 138345

Status: 1/unconfirmed, broadcast through 3 node(s)
Date: 29/06/2015 14:32
Source: Generated
Debit: 0.00 LDOGE
Net amount: -269048.50 LDOGE
Transaction ID: 2caaebc1fde07c523937a447e7a593f00278675298f8c28304c5044cb55efb9e-000

Run the command 'getblockhash 138345' to see if we are synced.

I got c73e1d7b690a443314660b7b770bb38816a5ecfa90ad12ba6aeba3b2afeaa64a

I got:

14:40:04

3f8aa0c61d34fd996da1d0eb4044128360e47556444abb4a64b50e39a013f100

Yeah, we are on different chains.  And I looked closer, those peers I listed are local, its my own IP.  It looks like someone staked with me on my chain for a couple of blocks but I'm just staking on my own right now.  I suspect we are all just going to end up on our own chains.  I don't think this is going to work to be honest.

[SockPuppetAccount]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

I don't think this fork is working.  Wait for a fix or see if old client is working.  I think everyone is going to end up on their own chain using the new wallet.

[crunck]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

I don't think this fork is working.  Wait for a fix or see if old client is working.  I think everyone is going to end up on their own chain using the new wallet.

Yes i have just said as much to devs on irc.. awaiting the response now

[maincoin]

I tried with:
addnode=73.162.65.43:49294
addnode=46.59.58.142:17014
addnode=94.254.73.95:53875
addnode=192.52.167.140:17014
addnode=24.188.162.131:17014
listen=1

.. nothing?

EDIT: nothing was a lie. I am sorry, sometimes i do that. I got 2 blocks :S

UPDATE!! Still 2 blocks.

[crunck]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

[SockPuppetAccount]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

I don't think this fork is working.  Wait for a fix or see if old client is working.  I think everyone is going to end up on their own chain using the new wallet.

Here is the noob question, how do i move the addresses from one wallet to another? I have never switched before

You don't.  You only have one wallet and we will only have 1 valid blockchain once it's decided what that is.  Backup the wallet.dat file in your appdata/roaming folder and don't lose it!

EDIT : I'll come back in a couple hours and see if the fix is up and running.

[crunck]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

I don't think this fork is working.  Wait for a fix or see if old client is working.  I think everyone is going to end up on their own chain using the new wallet.

Here is the noob question, how do i move the addresses from one wallet to another? I have never switched before

You don't.  You only have one wallet and we will only have 1 valid blockchain once it's decided what that is.  Backup the wallet.dat file in your appdata/roaming folder and don't lose it!

EDIT : I'll come back in a couple hours and see if the fix is up and running.

Ok thanks, we will get this sorted and as you have said EVERYONE BACK UP THE WALLET.DAT FILE !

[crunck]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

[maincoin]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

Great! I am happy they act so fast. It does suprise me in a positive way. Boom selecta!

[crunck]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

Great! I am happy they act so fast. It does suprise me in a positive way. Boom selecta!

I have even gone back onto IRC to help out, didint think I would be doing that.. but needs must and I am all ways happy to help out

[ctgiant]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

Great! I am happy they act so fast. It does suprise me in a positive way. Boom selecta!

It would be faster but my windows machine is slow so it compiles slowly  

[fpex]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

I don't think this fork is working.  Wait for a fix or see if old client is working.  I think everyone is going to end up on their own chain using the new wallet.

Here is the noob question, how do i move the addresses from one wallet to another? I have never switched before

You don't.  You only have one wallet and we will only have 1 valid blockchain once it's decided what that is.  Backup the wallet.dat file in your appdata/roaming folder and don't lose it!

EDIT : I'll come back in a couple hours and see if the fix is up and running.

that does not exists in the OS X app ... i just used the backup command :-)

[ctgiant]

Fully unsync. I get one connection at start and it goes away. And I was stupid enough to send a chunk of LDOGE from bittrex to the non syncing wallet for staking

Your coins should be fine.  They are on the blockchain.  They will be waiting for you on whatever the valid chain ends up being.

Thanks.
Any idea why it is not syncing? I get one connection for few tens of seconds when i start-up the wallet, then nothing. It only processed the first two blocks

I don't think this fork is working.  Wait for a fix or see if old client is working.  I think everyone is going to end up on their own chain using the new wallet.

Here is the noob question, how do i move the addresses from one wallet to another? I have never switched before

You don't.  You only have one wallet and we will only have 1 valid blockchain once it's decided what that is.  Backup the wallet.dat file in your appdata/roaming folder and don't lose it!

EDIT : I'll come back in a couple hours and see if the fix is up and running.

that does not exists in the OS X app ... i just used the backup command :-)

You can back up your wallet.dat from the OS X app...it is under File/Backup Wallet

You obviously don't need it though because you know how to do things in the console, which is great

[maincoin]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

Great! I am happy they act so fast. It does suprise me in a positive way. Boom selecta!

It would be faster but my windows machine is slow so it compiles slowly 

We should donate for a new Windows PC for Ctgiant!

[maincoin]

UPDATE

Everyone hold fire, and error has been found and rectified, and an updated wallet is being compiled right now.


I will update when i get more news.

Great! I am happy they act so fast. It does suprise me in a positive way. Boom selecta!

I have even gone back onto IRC to help out, didint think I would be doing that.. but needs must and I am all ways happy to help out

LOL, well in the end you saved the day.. hopefully.

[fpex]

Sure, except that I have no idea how i will restore it ;-)

[crunck]

UPDATE

PLEASE USE THESE NEW LINKS FOR THE RECOMPILED WALLET

Coming soon
Version 3.2.1.1
https://bitbucket.org/ctgiant/litedoge/downloads
Correct chain explorer http://litedoge.hopto.org/

THANKS FOR YOUR PATIENCE