█▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC

[ComputerGenie]

yes but if you set lower, sometimes if the coin is very low diff you end up with 100% rejects and then you dont get paid.

Fact:
If you're getting 100% rejects with 14-25 shares/minute, then something is wrong with the server or your modem/router is junk.

[aarons6]

yes but if you set lower, sometimes if the coin is very low diff you end up with 100% rejects and then you dont get paid.

Fact:
If you're getting 100% rejects with 14-25 shares/minute, then something is wrong with the server or your modem/router is junk.

im not the one having any problems with this pool.. if i set t he diff to less then 8k i get rejects and also if i set it too low, like under 5k i get one whole hash board show up with -----------------------------------

[ComputerGenie]

As an example, I have an S9 with just 2 weak boards (the 3rd was used to make my 4-blade S9) running @ 550MHz...


2d35m24s:
7,771.75 GH/S(avg)
Diff: 5.24K
Rejected: 147 (and most of those are from the 1/2 dozen times it's had to failover)


S7-LN converted to 650 MHz S7:
2d1h12m26s:
4,375.35 GH/S(avg)
Diff: 3.6K
Rejected: 291 (the highest rate of all 8 and most of those are from the 1/2 dozen times it's had to failover)


If you need 8k to not get "100%" rejects for 4,730 GH/S(avg), then there's major issues somewhere.

[Megaquake]

@ComputerGenie do you know if Bitmain corrected the queue setting of 8192 in cgminer in the s9?
i have to set mine to 0 in my s5's

[ComputerGenie]

@ComputerGenie do you know if Bitmain corrected the queue setting of 8192 in cgminer in the s9?
i have to set mine to 0 in my s5's

They bastardized cgminer into bmminer, there's no telling what they did; but, given their general attitude of "it works more often than not, so it's good", chances are they didn't "fix" anything (they rarely ever do). 

[ComputerGenie]

And just when I was begining to think this might work.....

Code:

Pool Status

sha256	3333	37	503	-	2%	0.0020

Last Earning:

12m ago

@crackfoo, let me know if you ever get it reliable; until then, I'm off to where I can make BTC

[Megaquake]

@ComputerGenie do you know if Bitmain corrected the queue setting of 8192 in cgminer in the s9?
i have to set mine to 0 in my s5's

They bastardized cgminer into bmminer, there's no telling what they did; but, given their general attitude of "it works more often than not, so it's good", chances are they didn't "fix" anything (they rarely ever do). 

Can you use Putty and check?

TERM=xterm screen -r

[JaredKaragen]

so are S7 users saying turning ES off and throwing diff < 8000 will limit the antminer freezing/not mining issues?

[Megaquake]

I have been mining an altcoin and the last 11 hours I have had no income, whats going on here?

Those drops are not from payouts I have not received any, unpaid balance keeps getting lower!

[JaredKaragen]

I have been mining an altcoin and the last 11 hours I have had no income, whats going on here?

Fix image link    Hopefully its not LBRY;  Ive been on it for days with no blocks yet... which is fine cause Im getting close to 9% share XD

[ComputerGenie]

Can you use Putty and check?

TERM=xterm screen -r

Code:

[Q]ueue: 1
[S]cantime: 60
[E]xpiry: 120

[ComputerGenie]

I have been mining an altcoin and the last 11 hours I have had no income, whats going on here?

"no payout" ≠ "no income"

[Megaquake]

Can you use Putty and check?

TERM=xterm screen -r

Code:

[Q]ueue: 1
[S]cantime: 60
[E]xpiry: 120

I set queue to 0 and scantime to 1 but it wont help the locking up issue unless you had an outrageous queue.

[ComputerGenie]

I set queue to 0 and santime to 1 but it wont help the locking up issue unless you had an outrageous queue.

I fixed the lockup issue by putting failover in proxy as well as in the miner.

It's just the 7 server fails in like 12 hrs that I can't deal with. Hit 12 blocks during those last 2 moofs and got squat-nada for them.

[JaredKaragen]

those drops look like either orphans or exchange price tanking...

But the earnings slope.. man... that's not funny.  Its like all the sudden it just started earning pennies... I can't explain that one....

But... if I read that right... 1.5Ph?

If you blast the network with crazy hashrate profitability will be up for a bit, but then diff goes throguh the roof and it plateaus out like seen.....

[Megaquake]

those drops look like either orphans or exchange price tanking...

But the earnings slope.. man... that's not funny.  Its like all the sudden it just started earning pennies... I can't explain that one....

But... if I read that right... 1.5Ph?

If you blast the network with crazy hashrate profitability will be up for a bit, but then diff goes throguh the roof and it plateaus out like seen.....
[/quote]

The value of that coin hasnt changed its stable and the same price the entire time, been 3k sat since 1800 yesterday that's just 1.5Th.

I have stopped mining and still loosing about 1 coin per minute

[ComputerGenie]

But... if I read that right... 1.5Ph?

You read it right, but the page, itself, is wrong.

It shows mine as: 54,842,979 Mh/s. If I had that, I wouldn't be dicking around with altcoins!

[JaredKaragen]

But... if I read that right... 1.5Ph?

You read it right, but the page, itself, is wrong.

It shows mine as: 54,842,979 Mh/s. If I had that, I wouldn't be dicking around with altcoins!

hahahahaha.

Yeah I was confused.


IDK what to say honestly....  Since the last change in mining address, I havent been pointing my SHA256 here, and am taking it up the butt by pointing at NH.

[ComputerGenie]

IDK what to say honestly....  Since the last change in mining address, I havent been pointing my SHA256 here, and am taking it up the butt by pointing at NH.

Only 3 places I aim my hash at (since the halving): zpool, kano.is, or solo.ckpool.

[ComputerGenie]

Check this address and watch the balance fade Mjr1BETVeEX2fixFcykrt7KKhUD1kkVpjZ

Last block was 15hrs so balance is dribbling upwards

When I 1st looked: 57.64846252 MNM
1 minute later: 57.77535513 MNM