Claymore (OP)
Donator
Legendary
 Offline
Activity: 1610
Merit: 1325
Miners developer
|
 |
November 17, 2016, 05:10:05 PM |
|
claymore 7.3 is causing driver crash in ubuntu 16.04 with amdgpu-pro 16.30.
It runs fine on ubuntu 14.04 with fglrx drivers.
Messages were added to /var/log/syslog contiuously, like:
Nov 17 17:53:32 rig2 kernel: [38207.575782] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x081049FF
Nov 17 17:53:32 rig2 kernel: [38207.575783] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E004001
Nov 17 17:53:32 rig2 kernel: [38207.575784] VM fault (0x01, vmid 7) at page 135285247, read from 'TC1' (0x54433100) (4)
Nov 17 17:53:32 rig2 kernel: [38207.575804] amdgpu 0000:06:00.0: GPU fault detected: 147 0x0fe88801
Nov 17 17:53:32 rig2 kernel: [38207.575805] amdgpu 0000:06:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x081049FD
Nov 17 17:53:32 rig2 kernel: [38207.575806] amdgpu 0000:06:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E088001
Nov 17 17:53:32 rig2 kernel: [38207.575807] VM fault (0x01, vmid 7) at page 135285245, read from 'TC9' (0x54433900) (136)
Nov 17 17:53:32 rig2 kernel: [38207.575847] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0ff88401
Nov 17 17:53:32 rig2 kernel: [38207.575848] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x081049FF
It will fill the disk quite quickly so I had to revert back to version 6.3
I havent tried amdgpu-pro version 16.40 and dont know if I should invest the time.
Miner must work fine with "-etha 2" option, also miner must select this mode automatically for 4xx cards. |
|
|
|
|
|
|
|
|
Unlike traditional banking where clients have only a few account numbers, with Bitcoin people can create an unlimited number of accounts (addresses). This can be used to easily track payments, and it improves anonymity.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
Dowper
|
|
November 17, 2016, 06:52:39 PM |
|
14:57:37:507 bd8 GPU #0: Ellesmere, 8192 MB available, 32 compute units 14:57:37:508 bd8 GPU #1: Pitcairn, 2048 MB available, 20 compute units 14:57:37:508 bd8 GPU #1 recognized as Radeon 270/270X 14:57:37:509 bd8 GPU #2: Ellesmere, 8192 MB available, 36 compute units 14:57:37:509 bd8 GPU #2 recognized as Radeon RX 480 Ellesmere 32 compute units (RX470) didn't say that it is recognized as RX470. It didn't affect mining, but you can fix it.  This is on both ETH and ZEC miners. And if you can add yellow temperature colors like in ZEC miner. |
|
|
|
|
|
bobben2
|
|
November 17, 2016, 06:58:54 PM |
|
claymore 7.3 is causing driver crash in ubuntu 16.04 with amdgpu-pro 16.30.
It runs fine on ubuntu 14.04 with fglrx drivers.
Messages were added to /var/log/syslog contiuously, like:
Nov 17 17:53:32 rig2 kernel: [38207.575782] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x081049FF
Nov 17 17:53:32 rig2 kernel: [38207.575783] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E004001
Nov 17 17:53:32 rig2 kernel: [38207.575784] VM fault (0x01, vmid 7) at page 135285247, read from 'TC1' (0x54433100) (4)
Nov 17 17:53:32 rig2 kernel: [38207.575804] amdgpu 0000:06:00.0: GPU fault detected: 147 0x0fe88801
Nov 17 17:53:32 rig2 kernel: [38207.575805] amdgpu 0000:06:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x081049FD
Nov 17 17:53:32 rig2 kernel: [38207.575806] amdgpu 0000:06:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E088001
Nov 17 17:53:32 rig2 kernel: [38207.575807] VM fault (0x01, vmid 7) at page 135285245, read from 'TC9' (0x54433900) (136)
Nov 17 17:53:32 rig2 kernel: [38207.575847] amdgpu 0000:01:00.0: GPU fault detected: 147 0x0ff88401
Nov 17 17:53:32 rig2 kernel: [38207.575848] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x081049FF
It will fill the disk quite quickly so I had to revert back to version 6.3
I havent tried amdgpu-pro version 16.40 and dont know if I should invest the time.
Miner must work fine with "-etha 2" option, also miner must select this mode automatically for 4xx cards. Yes, I can confirm that it works with -etha 2. Changed from -etha 0. The blame is on me for not reading the manual thorougly. I like the colors and the fact I can see gpu temps now. Thanks claymore. |
Fellow miners, get your thens and thans in order and help other forum readers understand what you are writing. Remember the grammar basics: B larger THAN A (comparator operator). If something THEN ....
|
|
|
n3v3rxf4i1s
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 17, 2016, 07:28:27 PM |
|
HELP!!!!!!! New Nitro RX470 8gb card not working on my rig... getting openCL call error. just 1 min after starting mining card doing this on stock settings. I feel like its a bad card because i switched around alot of things today and installed another new card that worked fine... is there anyway to reinstall the openCL settings in the GPU or is there a fix for this problem.
oh yeah i am running 8gb ram
1200 watt psu
powered risers
btc pro mobo
|
|
|
|
|
Trimegistus
Legendary
Offline
Activity: 1564
Merit: 1027
|
|
November 17, 2016, 07:33:26 PM |
|
HELP!!!!!!! New Nitro RX470 8gb card not working on my rig... getting openCL call error. just 1 min after starting mining card doing this on stock settings. I feel like its a bad card because i switched around alot of things today and installed another new card that worked fine... is there anyway to reinstall the openCL settings in the GPU or is there a fix for this problem.
oh yeah i am running 8gb ram
1200 watt psu
powered risers
btc pro mobo
Remove drivers with DDU and reinstall |
|
|
|
n3v3rxf4i1s
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 17, 2016, 07:50:42 PM |
|
HELP!!!!!!! New Nitro RX470 8gb card not working on my rig... getting openCL call error. just 1 min after starting mining card doing this on stock settings. I feel like its a bad card because i switched around alot of things today and installed another new card that worked fine... is there anyway to reinstall the openCL settings in the GPU or is there a fix for this problem.
oh yeah i am running 8gb ram
1200 watt psu
powered risers
btc pro mobo
Remove drivers with DDU and reinstall doing it now but i have done this once already. i did read somewhere that if you uncheck the hdmi audio box it will fix it to so thats what im trying i will update when finished |
|
|
|
|
n3v3rxf4i1s
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 17, 2016, 08:03:56 PM
Last edit: November 17, 2016, 08:14:19 PM by n3v3rxf4i1s |
|
HELP!!!!!!! New Nitro RX470 8gb card not working on my rig... getting openCL call error. just 1 min after starting mining card doing this on stock settings. I feel like its a bad card because i switched around alot of things today and installed another new card that worked fine... is there anyway to reinstall the openCL settings in the GPU or is there a fix for this problem.
oh yeah i am running 8gb ram
1200 watt psu
powered risers
btc pro mobo
Remove drivers with DDU and reinstall doing it now but i have done this once already. i did read somewhere that if you uncheck the hdmi audio box it will fix it to so thats what im trying i will update when finished okay this did not work any other advice pls i am using the most current drivers should i try and find 15.12 or is that not somthing that could fix this problem |
|
|
|
|
|
|
Nightw0rkeR
Newbie
Offline
Activity: 12
Merit: 0
|
|
November 17, 2016, 10:14:39 PM |
|
Try 16.6.2...Unpack driver and install inf fail manually,after that instal radeon settings app |
|
|
|
|
|
ffthomas
|
|
November 18, 2016, 09:07:46 AM |
|
HELP!!!!!!! New Nitro RX470 8gb card not working on my rig... getting openCL call error. just 1 min after starting mining card doing this on stock settings. I feel like its a bad card because i switched around alot of things today and installed another new card that worked fine... is there anyway to reinstall the openCL settings in the GPU or is there a fix for this problem.
oh yeah i am running 8gb ram
1200 watt psu
powered risers
btc pro mobo
Remove drivers with DDU and reinstall doing it now but i have done this once already. i did read somewhere that if you uncheck the hdmi audio box it will fix it to so thats what im trying i will update when finished okay this did not work any other advice pls i am using the most current drivers should i try and find 15.12 or is that not somthing that could fix this problem I use the newest ATI driver on my older (290/390) and new (RX 470/480) rigs. I tried the 15.12 version as Claymore recommends it. I didn't experience any difference, so I still use 16.x newest driver. I think changing the driver will not solve your problem. Did you over/underclock your cards or flashed a modded bios? |
|
|
|
|
|
king_pin
|
|
November 18, 2016, 11:33:43 AM |
|
It would be so great if the WATCHDOG could start one .bat file if one miner crashes, and another .bat file if another miner crashes
|
|
|
|
vlcmstne
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 18, 2016, 02:24:22 PM |
|
@Claymore can you put -retrydelay option in this great miner as you did in the awesome ZEC miner? So we could use it in multi algo pools  10x in advance. Ok I'll add it in a day. Thank you for that much needed lol |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 18, 2016, 04:52:12 PM |
|
Small update v7.4:
- added "-retrydelay" option.
- EthMan: added "View miner console" command.
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
November 18, 2016, 05:06:01 PM |
|
Small update v7.4:
- added "-retrydelay" option.
- EthMan: added "View miner console" command.
second one is really great |
|
|
|
|
|
adamvp
|
|
November 18, 2016, 05:45:00 PM |
|
any hashrate improvement?  |
I am looking for signature campaign pm me |
|
|
EuroCanuck
Newbie
Offline
Activity: 52
Merit: 0
|
|
November 18, 2016, 06:03:29 PM |
|
any hashrate improvement? i see no difference..7.3 works fine,im not gonna bother updating all my rigs.. |
|
|
|
|
demeso
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 18, 2016, 06:19:37 PM
Last edit: November 18, 2016, 06:33:22 PM by demeso |
|
hi guys im having some problem with one of my rx470 4gb 09:52:54:759 1144 Setting DAG epoch #88 for GPU #3
09:52:54:759 1270 Setting DAG epoch #88 for GPU #4
09:52:54:774 1270 Create GPU buffer for GPU #4
09:52:54:769 1144 Create GPU buffer for GPU #3
09:52:54:769 8cc Setting DAG epoch #88 for GPU #2
09:52:54:789 13cc Setting DAG epoch #88 for GPU #0
09:52:54:789 aa8 Setting DAG epoch #88 for GPU #1
09:52:54:806 13cc Create GPU buffer for GPU #0
09:52:54:807 aa8 Create GPU buffer for GPU #1
09:52:54:808 8cc Create GPU buffer for GPU #2
09:52:55:044 aa8 GPU 1, OpenCL error -4 (0) - cannot create DAG on GPU
09:52:55:520 c34 OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
09:52:55:530 c34 OC v7, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst
09:52:55:540 c34 OC v7, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
09:52:55:550 c34 OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst
09:52:55:560 c34 OC v7, Reset control for GPU 24, close miner right now if you want to use default control from Catalyst
09:52:58:052 e7c Setting DAG epoch #88 for GPU #1
09:52:58:258 e7c GPU 1, OpenCL error -4 (0) - cannot create DAG on GPU i am mining with claymore zcash without any problem but with this miner dont any help? Cheers |
|
|
|
|
markosvaba
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 18, 2016, 07:12:08 PM |
|
mem clock is high
|
|
|
|
|
demeso
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 18, 2016, 07:15:15 PM |
|
hi guys im having some problem with one of my rx470 4gb 09:52:54:759 1144 Setting DAG epoch #88 for GPU #3
09:52:54:759 1270 Setting DAG epoch #88 for GPU #4
09:52:54:774 1270 Create GPU buffer for GPU #4
09:52:54:769 1144 Create GPU buffer for GPU #3
09:52:54:769 8cc Setting DAG epoch #88 for GPU #2
09:52:54:789 13cc Setting DAG epoch #88 for GPU #0
09:52:54:789 aa8 Setting DAG epoch #88 for GPU #1
09:52:54:806 13cc Create GPU buffer for GPU #0
09:52:54:807 aa8 Create GPU buffer for GPU #1
09:52:54:808 8cc Create GPU buffer for GPU #2
09:52:55:044 aa8 GPU 1, OpenCL error -4 (0) - cannot create DAG on GPU
09:52:55:520 c34 OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
09:52:55:530 c34 OC v7, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst
09:52:55:540 c34 OC v7, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
09:52:55:550 c34 OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst
09:52:55:560 c34 OC v7, Reset control for GPU 24, close miner right now if you want to use default control from Catalyst
09:52:58:052 e7c Setting DAG epoch #88 for GPU #1
09:52:58:258 e7c GPU 1, OpenCL error -4 (0) - cannot create DAG on GPU i am mining with claymore zcash without any problem but with this miner dont any help? Cheers fixed. changed virtual memory |
|
|
|
|
vlcmstne
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 18, 2016, 10:47:29 PM |
|
Is there a way shorten or remove the timeout timer of 10 mins of not receiving a share (and deciding something is wrong with pool), I'm trying to let -retrydelay pick up on the pool removing auth. faster
|
|
|
|
|
|
