Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Snorremans]

i give up and hope someone can help me...

i have 8x nvidia gtx 1080.
windows 7, cause its not yet working under ubuntu 16.04

i have installed cuda but keep getting errors....
i added one image which shows everything i can show or what is needed.
Newest drivers are installed etc etc.
https://i.imgsafe.org/c3a5fb0de8.png

[1714235466]

1714235466

[1714235466]

1714235466

[wntrb0y]

Having a similar issue here, Linux Mint 17.1, FGLRX version 15.30.3  kernel-3.13.0-37-generic-x86_64, using 3 Radeon R9 Fury X GPUs.

All i get when running the ./start.bash script is :

Code:

????????????????????????????????????????????????????????????????ͻ
?        Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.1         ?
????????????????????????????????????????????????????????????????ͼ

ETH: 7 pools are specified
Main Ethereum pool is us1.ethermine.org:4444
DCR: 0 pool is specified
No protocol specified
No protocol specified
No AMD cards in the list.
No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit

But i know for a fact the GPUs are being detected by the system, since the output of

Code:

"aticonfig --lsa"

is :

Code:

* 0. 08:00.0 AMD Radeon (TM) R9 Fury Series
  1. 0b:00.0 AMD Radeon (TM) R9 Fury Series
  2. 0c:00.0 AMD Radeon (TM) R9 Fury Series

EDIT: v7.1 has been working fine on my 6x Fury X rig with FGLRX v 15.20.3 for 30 hours straight now with no issues.....maybe i should change the driver in my problem rig to this revision?

EDIT 2: Just tried swapping drivers....no luck. Forgot to mention the rig that is working correctly is running on Ubuntu 14.04.5 LTS, and the problem rig that i just swapped drivers on is Mint 17.1 MATE.

[citronick]

Hi Claymore,

I have a small request to include a field in Ethman, to extract the Crimson version installed on each rig.

If this is useful addition, I hope other members can also support this request so that justification for Claymore to spend the effort to add the field.

Thanks and keep up the good work.

Thanks

[adamvp]

another issue with Linux version, from few days it constantly switching SIA pools every 30-40minutes..
Windows version is ok, even if I revert rigs :S

Code:

SC: http error #28.
 SC: Failed to check work on pool, retry in 10 sec..

This error code means "operation timeout".
I can say again and again: don't use Linux if you can use Windows! Most problems are related not to miner but to Linux itself and I have to find workarounds all the time.

Hmm Windows is too expensive, and is unstable  if miner crash =windows crash and hard reset is necessary. If on linux fail = just kill the process

[Zedmony]

Hi Claymore,

I have a small request to include a field in Ethman, to extract the Crimson version installed on each rig.

If this is useful addition, I hope other members can also support this request so that justification for Claymore to spend the effort to add the field.

Thanks and keep up the good work.

Thanks

Why do you want to extract the Crimson version installed on each rig. What is the extra benefit for doing that?

[CoRpO]

purpose of repost 1 hour later ?

He posted between my original post and when I posted again. I reposted as he more then likely missed the original post in the sea of other posts. I thought it was very pertinent information as someone else mentioned having a similar problem. Having discussed a similar option with Genoil, I think it would be prudent in Claymores miner too.

Although thanks for policing. Your service is invaluable to this thread.

Well I may have been a bit rude, I'm pissed off by the pollution in this thread. Anyway problem solved, wou've been heard

[citronick]

Hi Claymore,

I have a small request to include a field in Ethman, to extract the Crimson version installed on each rig.

If this is useful addition, I hope other members can also support this request so that justification for Claymore to spend the effort to add the field.

Thanks and keep up the good work.

Thanks

Why do you want to extract the Crimson version installed on each rig. What is the extra benefit for doing that?

It may not be a big deal if you have only a couple of rigs, but its very useful for managing large mining farms.

I have many rigs with different types of GPUs and several batches are with modded ROMs, and Win7, Win8.1, Win10 and a lone Linux build.

I had to use different levels of Crimson drivers (for modded and non-modded rom rigs) and keep an eye on temperature and power consumption/power bill.

In addition, I have added a few new rigs for XMR mining and new Ethman manages both ETH and XMR on a single dashboard, the dashboard is going to look very busy.

It will be useful to keep track of Crimson drivers in the dashboard so that one could continuously ensure each rig is at optimum performance, with lowest power consumption and safe temperature, with the correct drivers as when they are available.

[blue1984]

@ Claymore
Which windows Version is recommened for the Rx470?

[brusque]

Hello everybody!

This is weird:

https://postimg.org/image/6jktdsfr9/

It's a RX 470 Red Dragon 4GB board on an old machine (that I use for tests) running Windows 10 and AMD 16.9.1 drivers.

Claymore recognizes correctly other boards like 4GB Tongas. But reports only 3072 MB on Ellesmeres.

I tried with 3 different models and other driver versions. Always same result.

Log file says:
11:51:33:253   f8   args: -allpools 1 -allcoins 1 -epool etc-eu.suprnova.cc:3333 -ewal brusque.labpc -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal brusque.labpc -dpsw x -dcoin sia -dcri 30
11:51:33:269   f8   
11:51:33:269   f8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:51:33:285   f8   º      Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta      º
11:51:33:285   f8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:51:33:300   f8   
11:51:33:519   f8   ETH: 1 pool is specified
11:51:33:519   f8   Main Ethereum pool is etc-eu.suprnova.cc:3333
11:51:33:535   f8   SC: 1 pool is specified
11:51:33:550   f8   Main Siacoin pool is sia.suprnova.cc:7777
11:51:33:675   f8   OpenCL platform: AMD Accelerated Parallel Processing
11:51:33:706   f8   OpenCL initializing...

11:51:33:722   f8   AMD Cards available: 1
11:51:33:722   f8   GPU #0: Ellesmere, 3072 MB available, 32 compute units
11:51:33:738   f8   POOL/SOLO version
11:51:33:738   f8   b221
11:51:33:785   f8   start building OpenCL program...

Best regards!

Brusque

[evertec]

Does anyone know if there's any way to mine two different secondary coins; for example, SIACOIN on my RX 480 cards, and LBRY on my 1070?

[rednoW]

Does anyone know if there's any way to mine two different secondary coins; for example, SIACOIN on my RX 480 cards, and LBRY on my 1070?

Use two miner instances with different *.bat files. Use -di option to select needed gpus and -mport 0 option to disable monitoring errors when running 2 miners simultaneously.

[lmc87sg]

Hi, Claymore!

Will you be adding the up-coming Zcash into your dual mining? They have a bounty of $30k for CPU and GPU miner.

[poseidon2017]

Hello everybody!

This is weird:

https://postimg.org/image/6jktdsfr9/

It's a RX 470 Red Dragon 4GB board on an old machine (that I use for tests) running Windows 10 and AMD 16.9.1 drivers.

Claymore recognizes correctly other boards like 4GB Tongas. But reports only 3072 MB on Ellesmeres.

I tried with 3 different models and other driver versions. Always same result.

Log file says:
11:51:33:253   f8   args: -allpools 1 -allcoins 1 -epool etc-eu.suprnova.cc:3333 -ewal brusque.labpc -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal brusque.labpc -dpsw x -dcoin sia -dcri 30
11:51:33:269   f8   
11:51:33:269   f8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:51:33:285   f8   º      Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta      º
11:51:33:285   f8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:51:33:300   f8   
11:51:33:519   f8   ETH: 1 pool is specified
11:51:33:519   f8   Main Ethereum pool is etc-eu.suprnova.cc:3333
11:51:33:535   f8   SC: 1 pool is specified
11:51:33:550   f8   Main Siacoin pool is sia.suprnova.cc:7777
11:51:33:675   f8   OpenCL platform: AMD Accelerated Parallel Processing
11:51:33:706   f8   OpenCL initializing...

11:51:33:722   f8   AMD Cards available: 1
11:51:33:722   f8   GPU #0: Ellesmere, 3072 MB available, 32 compute units
11:51:33:738   f8   POOL/SOLO version
11:51:33:738   f8   b221
11:51:33:785   f8   start building OpenCL program...

Best regards!

Brusque

Happened to me as well... reinstalling the driver solved. Make sure to use Wagnard DDU to uninstall the old drivers without leaving any trace, and use the new rx 470 driver alone..

[Claymore]

@ Claymore
Which windows Version is recommened for the Rx470?

Win7 or Win10 no difference for miner.

Hi, Claymore!
Will you be adding the up-coming Zcash into your dual mining? They have a bounty of $30k for CPU and GPU miner.

I will not do anything until this coin is released.

Hello everybody!

This is weird:

It's a RX 470 Red Dragon 4GB board on an old machine (that I use for tests) running Windows 10 and AMD 16.9.1 drivers.

Claymore recognizes correctly other boards like 4GB Tongas. But reports only 3072 MB on Ellesmeres.

I tried with 3 different models and other driver versions. Always same result.

OpenCL reduced available memory for OpenCL applications on your system, usually it is related to environment variables and size of RAM installed.
But detecting 3GB instead of 4GB will not change your mining speed. So what's the problem?

[Dowper]

Hello everybody!

This is weird:



It's a RX 470 Red Dragon 4GB board on an old machine (that I use for tests) running Windows 10 and AMD 16.9.1 drivers.

Claymore recognizes correctly other boards like 4GB Tongas. But reports only 3072 MB on Ellesmeres.

I tried with 3 different models and other driver versions. Always same result.

Log file says:
11:51:33:253   f8   args: -allpools 1 -allcoins 1 -epool etc-eu.suprnova.cc:3333 -ewal brusque.labpc -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal brusque.labpc -dpsw x -dcoin sia -dcri 30
11:51:33:269   f8   
11:51:33:269   f8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:51:33:285   f8   º      Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta      º
11:51:33:285   f8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:51:33:300   f8   
11:51:33:519   f8   ETH: 1 pool is specified
11:51:33:519   f8   Main Ethereum pool is etc-eu.suprnova.cc:3333
11:51:33:535   f8   SC: 1 pool is specified
11:51:33:550   f8   Main Siacoin pool is sia.suprnova.cc:7777
11:51:33:675   f8   OpenCL platform: AMD Accelerated Parallel Processing
11:51:33:706   f8   OpenCL initializing...

11:51:33:722   f8   AMD Cards available: 1
11:51:33:722   f8   GPU #0: Ellesmere, 3072 MB available, 32 compute units
11:51:33:738   f8   POOL/SOLO version
11:51:33:738   f8   b221
11:51:33:785   f8   start building OpenCL program...

Best regards!

Brusque

I've had the same problem but with my RX480. My problem was that it needs more ram, I was with only 2GB, then put 2GB more and everything is OK. How much ram do you have?

[36524s]

I have flashed my bios and 4 out of my 5 cards are running at 29mh but 1 is running at 18. Is there an easy way of identifying which physical card it is using the Claymore mining app (which is awesome btw!!!)?

[joaocha]

I have flashed my bios and 4 out of my 5 cards are running at 29mh but 1 is running at 18. Is there an easy way of identifying which physical card it is using the Claymore mining app (which is awesome btw!!!)?

See it tempo on claymore, example Gpu1 65c, press 1 on your keyboard, it ill stop mining on it, go to msi afterburn search for a low temp card, stop it fans, profit

[brusque]

OpenCL reduced available memory for OpenCL applications on your system, usually it is related to environment variables and size of RAM installed.
But detecting 3GB instead of 4GB will not change your mining speed. So what's the problem?

The miner exits just after the "start building OpenCL program...".

I've had the same problem but with my RX480. My problem was that it needs more ram, I was with only 2GB, then put 2GB more and everything is OK. How much ram do you have?

That's it. BINGO!

Machine had only 2GB of RAM. Replacing a 1GB memory card for a 2GB one (3GB total) solved.

Thank you very much to everyone to replied.

Regards, Brusque

[v66s]

Prompt, volume memory like something affects the production of ET, it turned out that is worth 1GB. What will happen if you increase to 4GB?

[tvasbn]

On the rigs that i have connected to the same network as my ETH Pool ( one PC running geth ) i get the
"No new jobs where received from the pool"  error

Screenshot

http://imgur.com/a/veWvW

its connected to the pool, it shows GPU temp but it wont start mining

any suggestions?