AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
December 27, 2016, 05:55:02 PM |
|
There is a really common misunderstanding by miners, including the author of this article. A PCIe riser works fine in the 16x slot. The little 1x adapter board fits in the first part of the 16x slot. The notch fits perfectly and holds it in place. You just need to make sure you get it seated properly. You never want to use ribbon cables. They are poorly made. The power to the ribbon cable is usually from a cable that is hot glued to the ribbon cable. You can see the globs of hot glue in the photo on the product picture for the 16x ribbon cable at Amazon. (I bought one when I was a newb too.) +1 The best way to do it is to don't use any risers, but the conflict with this is that there is a maximum of 4 GPUs on the mobo with only a select number of mobo's. The next best option is usb risers which add cost, but give the flexibility of having the GPUs off of the mobo. After using ribbon risers, I would not use them anymore. They are too fragile and unreliable. In summary, go with the usb risers.
|
|
|
|
|
fittsy
|
|
December 27, 2016, 10:23:09 PM |
|
The best way to do it is to don't use any risers, but the conflict with this is that there is a maximum of 4 GPUs on the mobo with only a select number of mobo's. The next best option is usb risers which add cost, but give the flexibility of having the GPUs off of the mobo. After using ribbon risers, I would not use them anymore. They are too fragile and unreliable.
In summary, go with the usb risers.
I sell risers so take what I say with a grain of salt... but why wouldn't you use risers? You can space your GPUs out better and get more airflow and lower temperatures. Your GPUs will last longer. Yes it means you need more power in your PSU as you need to power the risers but you can also fit 6 or 8 (yes some people do more than cards per mobo/cpu/ram/ssd. You get cost savings by running more GPU per mobo.
|
|
|
|
Rami84
|
|
December 28, 2016, 09:25:42 PM Last edit: December 28, 2016, 09:49:36 PM by Rami84 |
|
I have a problem with a new rig, each time I start claymore it start to mine for a few seconds then it gave me 000 in hash rate after that miner restart itself then screen show squares and rig restart sometimes it gives a blue screen and sometimes widows blue screen then restart Rig: Mobo: MSI 870s Processor: AMD FX 4100 RAM: 4GB GPU: 2x Rx480 HDD: 160GB SATA PSU: Zalman ZM500-GV (tried corsair cx750m) OS: Windows 7
|
|
|
|
Jinx99
Member
Offline
Activity: 91
Merit: 10
|
|
December 28, 2016, 10:10:35 PM |
|
I have a problem with a new rig, each time I start claymore it start to mine for a few seconds then it gave me 000 in hash rate after that miner restart itself then screen show squares and rig
This is a new-built rig or this system already used in mining before problem appeared?
|
|
|
|
Rami84
|
|
December 28, 2016, 10:25:46 PM |
|
I have a problem with a new rig, each time I start claymore it start to mine for a few seconds then it gave me 000 in hash rate after that miner restart itself then screen show squares and rig
This is a new-built rig or this system already used in mining before problem appeared? It's new one
|
|
|
|
neokensou
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 30, 2016, 08:30:33 AM |
|
I have a rig with 5 gpus. All RX 480, diferent brand. 4 References + 1 Shappire Nitro HDMI plugged.
I bought a second hand XFX non reference 480 and after a hour plugged to this rig, Claymore's miner crashes and freezes. I changed its riser but I'm not sure if it can be for that or there is any problem with this XFX's card. Any help?
Thank you and thank you Claymore for your work.
|
|
|
|
yarikss
|
|
December 30, 2016, 11:19:11 AM |
|
I have a problem, 2*Radeon R9 380 4GB, Ram 4GB, OpenCL error-4 Cannot create DAG on GPU. Who else can help?
|
|
|
|
fittsy
|
|
December 30, 2016, 04:22:03 PM |
|
I have a rig with 5 gpus. All RX 480, diferent brand. 4 References + 1 Shappire Nitro HDMI plugged.
I bought a second hand XFX non reference 480 and after a hour plugged to this rig, Claymore's miner crashes and freezes. I changed its riser but I'm not sure if it can be for that or there is any problem with this XFX's card. Any help?
Thank you and thank you Claymore for your work.
That could definitely be a riser problem. Also can your PSU handle the extra load?
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
December 30, 2016, 10:17:02 PM Last edit: December 31, 2016, 12:13:01 AM by maxmad_x |
|
@Claymore
I am getting constant devfee DAG creation errors and constant crashes of the miner. ! The moement devfee DAG creation starts from dwarfpool; it crashes immediately with this error 18:09:21:751 87c DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008 18:09:21:888 87c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xe19fFB70E148A76d26698036A9fFD22057967D1b", "x"], "id": 2, "method": "eth_submitLogin"} 18:09:21:889 87c DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) 18:09:22:024 87c got 39 bytes 18:09:22:024 87c buf: {"id":2,"jsonrpc":"2.0","result":true} 18:09:22:024 87c parse packet: 38 18:09:22:024 87c ETH: Authorized 18:09:22:024 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 18:09:22:024 87c new buf size: 0 18:09:22:163 87c got 244 bytes 18:09:22:163 87c buf: {"result":["0xd91c11bf6e42ba9dda8d6c80488bd3ce943989494b3ffbc59c634ee7645ba0d8","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:22:163 87c parse packet: 242 18:09:22:163 87c ETH: job changed 18:09:22:163 87c new buf size: 0 18:09:22:164 87c DevFee: start mining 18:09:22:346 344 Setting DAG epoch #96... 18:09:23:987 344 Setting DAG epoch #96 for GPU #0 18:09:23:987 924 Setting DAG epoch #96 for GPU #3 18:09:23:987 8e0 Setting DAG epoch #96 for GPU #2 18:09:23:993 a78 Setting DAG epoch #96 for GPU #1 18:09:24:256 d7c recv: 51 18:09:24:256 d7c srv pck: 50 18:09:24:281 d7c srv bs: 0 18:09:24:281 d7c sent: 203 18:09:29:019 87c got 244 bytes 18:09:29:019 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
18:09:29:019 87c parse packet: 242 18:09:29:019 87c ETH: job changed 18:09:29:019 87c new buf size: 0 18:09:29:020 87c DevFee: ETH: 12/30/16-18:09:29 - New job from eth-eu.dwarfpool.com:8008 18:09:29:020 87c target: 0x0000000225c17d04 18:09:29:266 804 recv: 51 18:09:29:266 804 srv pck: 50 18:09:29:292 804 srv bs: 0 18:09:29:292 804 sent: 182 18:09:29:557 13a8 GPU0 t=62C fan=35%, GPU1 t=60C fan=34%, GPU2 t=75C fan=34%, GPU3 t=70C fan=35% 18:09:29:558 13a8 em hbt: 0, fm hbt: 0, 18:09:29:558 13a8 watchdog - thread 0, hb time 7391 18:09:29:558 13a8 watchdog - thread 1, hb time 7219 18:09:29:558 13a8 watchdog - thread 2, hb time 7344 18:09:29:558 13a8 watchdog - thread 3, hb time 7172 18:09:29:558 13a8 watchdog - thread 4, hb time 7219 18:09:29:558 13a8 watchdog - thread 5, hb time 7375 18:09:29:558 13a8 watchdog - thread 6, hb time 7172 18:09:29:558 13a8 watchdog - thread 7, hb time 7375 18:09:31:596 8e0 GPU 2 DAG creation time - 7566 ms 18:09:31:596 8e0 Setting DAG epoch #96 for GPU #2 done 18:09:31:596 8e0 DevFee: restart timer because of updating DAG 18:09:31:607 924 GPU 3 DAG creation time - 7564 ms 18:09:31:608 924 Setting DAG epoch #96 for GPU #3 done 18:09:31:609 924 DevFee: restart timer because of updating DAG 18:09:31:643 a78 GPU 1 DAG creation time - 7609 ms 18:09:31:643 a78 Setting DAG epoch #96 for GPU #1 done 18:09:31:644 a78 DevFee: restart timer because of updating DAG 18:09:31:782 344 GPU 0 DAG creation time - 7634 ms 18:09:31:782 344 Setting DAG epoch #96 for GPU #0 done 18:09:31:783 344 DevFee: restart timer because of updating DAG 18:09:32:166 87c DevFee: ETH: checking pool connection... 18:09:32:166 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
18:09:32:301 87c got 244 bytes 18:09:32:301 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:32:301 87c parse packet: 242 18:09:32:301 87c ETH: job is the same 18:09:32:301 87c new buf size: 0 This is a new error. Gotta mine buddy!!
|
|
|
|
Hotmetal
|
|
December 31, 2016, 02:42:01 AM |
|
@Claymore
I am getting constant devfee DAG creation errors and constant crashes of the miner. ! The moement devfee DAG creation starts from dwarfpool; it crashes immediately with this error 18:09:21:751 87c DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008 18:09:21:888 87c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xe19fFB70E148A76d26698036A9fFD22057967D1b", "x"], "id": 2, "method": "eth_submitLogin"} 18:09:21:889 87c DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) 18:09:22:024 87c got 39 bytes 18:09:22:024 87c buf: {"id":2,"jsonrpc":"2.0","result":true} 18:09:22:024 87c parse packet: 38 18:09:22:024 87c ETH: Authorized 18:09:22:024 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 18:09:22:024 87c new buf size: 0 18:09:22:163 87c got 244 bytes 18:09:22:163 87c buf: {"result":["0xd91c11bf6e42ba9dda8d6c80488bd3ce943989494b3ffbc59c634ee7645ba0d8","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:22:163 87c parse packet: 242 18:09:22:163 87c ETH: job changed 18:09:22:163 87c new buf size: 0 18:09:22:164 87c DevFee: start mining 18:09:22:346 344 Setting DAG epoch #96... 18:09:23:987 344 Setting DAG epoch #96 for GPU #0 18:09:23:987 924 Setting DAG epoch #96 for GPU #3 18:09:23:987 8e0 Setting DAG epoch #96 for GPU #2 18:09:23:993 a78 Setting DAG epoch #96 for GPU #1 18:09:24:256 d7c recv: 51 18:09:24:256 d7c srv pck: 50 18:09:24:281 d7c srv bs: 0 18:09:24:281 d7c sent: 203 18:09:29:019 87c got 244 bytes 18:09:29:019 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
18:09:29:019 87c parse packet: 242 18:09:29:019 87c ETH: job changed 18:09:29:019 87c new buf size: 0 18:09:29:020 87c DevFee: ETH: 12/30/16-18:09:29 - New job from eth-eu.dwarfpool.com:8008 18:09:29:020 87c target: 0x0000000225c17d04 18:09:29:266 804 recv: 51 18:09:29:266 804 srv pck: 50 18:09:29:292 804 srv bs: 0 18:09:29:292 804 sent: 182 18:09:29:557 13a8 GPU0 t=62C fan=35%, GPU1 t=60C fan=34%, GPU2 t=75C fan=34%, GPU3 t=70C fan=35% 18:09:29:558 13a8 em hbt: 0, fm hbt: 0, 18:09:29:558 13a8 watchdog - thread 0, hb time 7391 18:09:29:558 13a8 watchdog - thread 1, hb time 7219 18:09:29:558 13a8 watchdog - thread 2, hb time 7344 18:09:29:558 13a8 watchdog - thread 3, hb time 7172 18:09:29:558 13a8 watchdog - thread 4, hb time 7219 18:09:29:558 13a8 watchdog - thread 5, hb time 7375 18:09:29:558 13a8 watchdog - thread 6, hb time 7172 18:09:29:558 13a8 watchdog - thread 7, hb time 7375 18:09:31:596 8e0 GPU 2 DAG creation time - 7566 ms 18:09:31:596 8e0 Setting DAG epoch #96 for GPU #2 done 18:09:31:596 8e0 DevFee: restart timer because of updating DAG 18:09:31:607 924 GPU 3 DAG creation time - 7564 ms 18:09:31:608 924 Setting DAG epoch #96 for GPU #3 done 18:09:31:609 924 DevFee: restart timer because of updating DAG 18:09:31:643 a78 GPU 1 DAG creation time - 7609 ms 18:09:31:643 a78 Setting DAG epoch #96 for GPU #1 done 18:09:31:644 a78 DevFee: restart timer because of updating DAG 18:09:31:782 344 GPU 0 DAG creation time - 7634 ms 18:09:31:782 344 Setting DAG epoch #96 for GPU #0 done 18:09:31:783 344 DevFee: restart timer because of updating DAG 18:09:32:166 87c DevFee: ETH: checking pool connection... 18:09:32:166 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
18:09:32:301 87c got 244 bytes 18:09:32:301 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:32:301 87c parse packet: 242 18:09:32:301 87c ETH: job is the same 18:09:32:301 87c new buf size: 0 This is a new error. Gotta mine buddy!! 2 Gig video card?
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
December 31, 2016, 02:43:58 AM |
|
@Claymore
I am getting constant devfee DAG creation errors and constant crashes of the miner. ! The moement devfee DAG creation starts from dwarfpool; it crashes immediately with this error 18:09:21:751 87c DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008 18:09:21:888 87c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xe19fFB70E148A76d26698036A9fFD22057967D1b", "x"], "id": 2, "method": "eth_submitLogin"} 18:09:21:889 87c DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) 18:09:22:024 87c got 39 bytes 18:09:22:024 87c buf: {"id":2,"jsonrpc":"2.0","result":true} 18:09:22:024 87c parse packet: 38 18:09:22:024 87c ETH: Authorized 18:09:22:024 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 18:09:22:024 87c new buf size: 0 18:09:22:163 87c got 244 bytes 18:09:22:163 87c buf: {"result":["0xd91c11bf6e42ba9dda8d6c80488bd3ce943989494b3ffbc59c634ee7645ba0d8","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:22:163 87c parse packet: 242 18:09:22:163 87c ETH: job changed 18:09:22:163 87c new buf size: 0 18:09:22:164 87c DevFee: start mining 18:09:22:346 344 Setting DAG epoch #96... 18:09:23:987 344 Setting DAG epoch #96 for GPU #0 18:09:23:987 924 Setting DAG epoch #96 for GPU #3 18:09:23:987 8e0 Setting DAG epoch #96 for GPU #2 18:09:23:993 a78 Setting DAG epoch #96 for GPU #1 18:09:24:256 d7c recv: 51 18:09:24:256 d7c srv pck: 50 18:09:24:281 d7c srv bs: 0 18:09:24:281 d7c sent: 203 18:09:29:019 87c got 244 bytes 18:09:29:019 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
18:09:29:019 87c parse packet: 242 18:09:29:019 87c ETH: job changed 18:09:29:019 87c new buf size: 0 18:09:29:020 87c DevFee: ETH: 12/30/16-18:09:29 - New job from eth-eu.dwarfpool.com:8008 18:09:29:020 87c target: 0x0000000225c17d04 18:09:29:266 804 recv: 51 18:09:29:266 804 srv pck: 50 18:09:29:292 804 srv bs: 0 18:09:29:292 804 sent: 182 18:09:29:557 13a8 GPU0 t=62C fan=35%, GPU1 t=60C fan=34%, GPU2 t=75C fan=34%, GPU3 t=70C fan=35% 18:09:29:558 13a8 em hbt: 0, fm hbt: 0, 18:09:29:558 13a8 watchdog - thread 0, hb time 7391 18:09:29:558 13a8 watchdog - thread 1, hb time 7219 18:09:29:558 13a8 watchdog - thread 2, hb time 7344 18:09:29:558 13a8 watchdog - thread 3, hb time 7172 18:09:29:558 13a8 watchdog - thread 4, hb time 7219 18:09:29:558 13a8 watchdog - thread 5, hb time 7375 18:09:29:558 13a8 watchdog - thread 6, hb time 7172 18:09:29:558 13a8 watchdog - thread 7, hb time 7375 18:09:31:596 8e0 GPU 2 DAG creation time - 7566 ms 18:09:31:596 8e0 Setting DAG epoch #96 for GPU #2 done 18:09:31:596 8e0 DevFee: restart timer because of updating DAG 18:09:31:607 924 GPU 3 DAG creation time - 7564 ms 18:09:31:608 924 Setting DAG epoch #96 for GPU #3 done 18:09:31:609 924 DevFee: restart timer because of updating DAG 18:09:31:643 a78 GPU 1 DAG creation time - 7609 ms 18:09:31:643 a78 Setting DAG epoch #96 for GPU #1 done 18:09:31:644 a78 DevFee: restart timer because of updating DAG 18:09:31:782 344 GPU 0 DAG creation time - 7634 ms 18:09:31:782 344 Setting DAG epoch #96 for GPU #0 done 18:09:31:783 344 DevFee: restart timer because of updating DAG 18:09:32:166 87c DevFee: ETH: checking pool connection... 18:09:32:166 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
18:09:32:301 87c got 244 bytes 18:09:32:301 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:32:301 87c parse packet: 242 18:09:32:301 87c ETH: job is the same 18:09:32:301 87c new buf size: 0 This is a new error. Gotta mine buddy!! 2 Gig video card? Nope.. Its happening to my RX480s on all 3 rigs at the same time.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
December 31, 2016, 08:07:47 AM |
|
@Claymore
I am getting constant devfee DAG creation errors and constant crashes of the miner. ! The moement devfee DAG creation starts from dwarfpool; it crashes immediately with this error 18:09:21:751 87c DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008 18:09:21:888 87c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xe19fFB70E148A76d26698036A9fFD22057967D1b", "x"], "id": 2, "method": "eth_submitLogin"} 18:09:21:889 87c DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) 18:09:22:024 87c got 39 bytes 18:09:22:024 87c buf: {"id":2,"jsonrpc":"2.0","result":true} 18:09:22:024 87c parse packet: 38 18:09:22:024 87c ETH: Authorized 18:09:22:024 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 18:09:22:024 87c new buf size: 0 18:09:22:163 87c got 244 bytes 18:09:22:163 87c buf: {"result":["0xd91c11bf6e42ba9dda8d6c80488bd3ce943989494b3ffbc59c634ee7645ba0d8","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:22:163 87c parse packet: 242 18:09:22:163 87c ETH: job changed 18:09:22:163 87c new buf size: 0 18:09:22:164 87c DevFee: start mining 18:09:22:346 344 Setting DAG epoch #96... 18:09:23:987 344 Setting DAG epoch #96 for GPU #0 18:09:23:987 924 Setting DAG epoch #96 for GPU #3 18:09:23:987 8e0 Setting DAG epoch #96 for GPU #2 18:09:23:993 a78 Setting DAG epoch #96 for GPU #1 18:09:24:256 d7c recv: 51 18:09:24:256 d7c srv pck: 50 18:09:24:281 d7c srv bs: 0 18:09:24:281 d7c sent: 203 18:09:29:019 87c got 244 bytes 18:09:29:019 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
18:09:29:019 87c parse packet: 242 18:09:29:019 87c ETH: job changed 18:09:29:019 87c new buf size: 0 18:09:29:020 87c DevFee: ETH: 12/30/16-18:09:29 - New job from eth-eu.dwarfpool.com:8008 18:09:29:020 87c target: 0x0000000225c17d04 18:09:29:266 804 recv: 51 18:09:29:266 804 srv pck: 50 18:09:29:292 804 srv bs: 0 18:09:29:292 804 sent: 182 18:09:29:557 13a8 GPU0 t=62C fan=35%, GPU1 t=60C fan=34%, GPU2 t=75C fan=34%, GPU3 t=70C fan=35% 18:09:29:558 13a8 em hbt: 0, fm hbt: 0, 18:09:29:558 13a8 watchdog - thread 0, hb time 7391 18:09:29:558 13a8 watchdog - thread 1, hb time 7219 18:09:29:558 13a8 watchdog - thread 2, hb time 7344 18:09:29:558 13a8 watchdog - thread 3, hb time 7172 18:09:29:558 13a8 watchdog - thread 4, hb time 7219 18:09:29:558 13a8 watchdog - thread 5, hb time 7375 18:09:29:558 13a8 watchdog - thread 6, hb time 7172 18:09:29:558 13a8 watchdog - thread 7, hb time 7375 18:09:31:596 8e0 GPU 2 DAG creation time - 7566 ms 18:09:31:596 8e0 Setting DAG epoch #96 for GPU #2 done 18:09:31:596 8e0 DevFee: restart timer because of updating DAG 18:09:31:607 924 GPU 3 DAG creation time - 7564 ms 18:09:31:608 924 Setting DAG epoch #96 for GPU #3 done 18:09:31:609 924 DevFee: restart timer because of updating DAG 18:09:31:643 a78 GPU 1 DAG creation time - 7609 ms 18:09:31:643 a78 Setting DAG epoch #96 for GPU #1 done 18:09:31:644 a78 DevFee: restart timer because of updating DAG 18:09:31:782 344 GPU 0 DAG creation time - 7634 ms 18:09:31:782 344 Setting DAG epoch #96 for GPU #0 done 18:09:31:783 344 DevFee: restart timer because of updating DAG 18:09:32:166 87c DevFee: ETH: checking pool connection... 18:09:32:166 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
18:09:32:301 87c got 244 bytes 18:09:32:301 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:32:301 87c parse packet: 242 18:09:32:301 87c ETH: job is the same 18:09:32:301 87c new buf size: 0 This is a new error. Gotta mine buddy!! 2 Gig video card? Nope.. Its happening to my RX480s on all 3 rigs at the same time. You mine not ETH, but some fork. By default, miner mines ETH in devfee mode, so it has to re-build DAG because ETH and your coin use different epochs. If you mine EXP, use "-allcoins exp". If you mine ETC - you can use pools that accept wallet address directly (i.e. pools that work without "-allpools 1" option). If you mine some different coin, there is no way to fix it and you will lose about 10-15 seconds every hour for DAG recreation. If your GPU is 2GB and it cannot handle ETH DAG - it will crash. It your cards can mine ETH properly - try "-allcoins -1" so miner can detect correct DAG size at once (read Readme for details).
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
December 31, 2016, 11:58:41 AM |
|
@Claymore
I am getting constant devfee DAG creation errors and constant crashes of the miner. ! The moement devfee DAG creation starts from dwarfpool; it crashes immediately with this error 18:09:21:751 87c DevFee: ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <87.98.182.61> port 8008 18:09:21:888 87c send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0xe19fFB70E148A76d26698036A9fFD22057967D1b", "x"], "id": 2, "method": "eth_submitLogin"} 18:09:21:889 87c DevFee: ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) 18:09:22:024 87c got 39 bytes 18:09:22:024 87c buf: {"id":2,"jsonrpc":"2.0","result":true} 18:09:22:024 87c parse packet: 38 18:09:22:024 87c ETH: Authorized 18:09:22:024 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"} 18:09:22:024 87c new buf size: 0 18:09:22:163 87c got 244 bytes 18:09:22:163 87c buf: {"result":["0xd91c11bf6e42ba9dda8d6c80488bd3ce943989494b3ffbc59c634ee7645ba0d8","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:22:163 87c parse packet: 242 18:09:22:163 87c ETH: job changed 18:09:22:163 87c new buf size: 0 18:09:22:164 87c DevFee: start mining 18:09:22:346 344 Setting DAG epoch #96... 18:09:23:987 344 Setting DAG epoch #96 for GPU #0 18:09:23:987 924 Setting DAG epoch #96 for GPU #3 18:09:23:987 8e0 Setting DAG epoch #96 for GPU #2 18:09:23:993 a78 Setting DAG epoch #96 for GPU #1 18:09:24:256 d7c recv: 51 18:09:24:256 d7c srv pck: 50 18:09:24:281 d7c srv bs: 0 18:09:24:281 d7c sent: 203 18:09:29:019 87c got 244 bytes 18:09:29:019 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}
18:09:29:019 87c parse packet: 242 18:09:29:019 87c ETH: job changed 18:09:29:019 87c new buf size: 0 18:09:29:020 87c DevFee: ETH: 12/30/16-18:09:29 - New job from eth-eu.dwarfpool.com:8008 18:09:29:020 87c target: 0x0000000225c17d04 18:09:29:266 804 recv: 51 18:09:29:266 804 srv pck: 50 18:09:29:292 804 srv bs: 0 18:09:29:292 804 sent: 182 18:09:29:557 13a8 GPU0 t=62C fan=35%, GPU1 t=60C fan=34%, GPU2 t=75C fan=34%, GPU3 t=70C fan=35% 18:09:29:558 13a8 em hbt: 0, fm hbt: 0, 18:09:29:558 13a8 watchdog - thread 0, hb time 7391 18:09:29:558 13a8 watchdog - thread 1, hb time 7219 18:09:29:558 13a8 watchdog - thread 2, hb time 7344 18:09:29:558 13a8 watchdog - thread 3, hb time 7172 18:09:29:558 13a8 watchdog - thread 4, hb time 7219 18:09:29:558 13a8 watchdog - thread 5, hb time 7375 18:09:29:558 13a8 watchdog - thread 6, hb time 7172 18:09:29:558 13a8 watchdog - thread 7, hb time 7375 18:09:31:596 8e0 GPU 2 DAG creation time - 7566 ms 18:09:31:596 8e0 Setting DAG epoch #96 for GPU #2 done 18:09:31:596 8e0 DevFee: restart timer because of updating DAG 18:09:31:607 924 GPU 3 DAG creation time - 7564 ms 18:09:31:608 924 Setting DAG epoch #96 for GPU #3 done 18:09:31:609 924 DevFee: restart timer because of updating DAG 18:09:31:643 a78 GPU 1 DAG creation time - 7609 ms 18:09:31:643 a78 Setting DAG epoch #96 for GPU #1 done 18:09:31:644 a78 DevFee: restart timer because of updating DAG 18:09:31:782 344 GPU 0 DAG creation time - 7634 ms 18:09:31:782 344 Setting DAG epoch #96 for GPU #0 done 18:09:31:783 344 DevFee: restart timer because of updating DAG 18:09:32:166 87c DevFee: ETH: checking pool connection... 18:09:32:166 87c send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
18:09:32:301 87c got 244 bytes 18:09:32:301 87c buf: {"result":["0xfbd42bf89ae4b0bdffdafa7c9ac7842b0cb13b4745f4cd3ea6c81e62c1617595","0xb0a52850ea22f7b03f44593e27552c6d850e40a9f6b92fbf1d15586b6affbccb","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}
18:09:32:301 87c parse packet: 242 18:09:32:301 87c ETH: job is the same 18:09:32:301 87c new buf size: 0 This is a new error. Gotta mine buddy!! 2 Gig video card? Nope.. Its happening to my RX480s on all 3 rigs at the same time. You mine not ETH, but some fork. By default, miner mines ETH in devfee mode, so it has to re-build DAG because ETH and your coin use different epochs. If you mine EXP, use "-allcoins exp". If you mine ETC - you can use pools that accept wallet address directly (i.e. pools that work without "-allpools 1" option). If you mine some different coin, there is no way to fix it and you will lose about 10-15 seconds every hour for DAG recreation. If your GPU is 2GB and it cannot handle ETH DAG - it will crash. It your cards can mine ETH properly - try "-allcoins -1" so miner can detect correct DAG size at once (read Readme for details). I am using minigpoolhub with EthDcrMiner64.exe -epool us-east.ethash-hub.miningpoolhub.com:17020 -ewal blah.blah1 -eworker blah.blah1 -esm 2 -epsw x -allpools 1 -allcoins 1 -r 0 -wd 1 -etha 0 -wd 1 -dbg 1 -lidag 0 -mport 4444. it was working fine for last 2 months. suddenly yesterday I started getting restarts. Did something change yesterday? ETH shows epoch 96 tome there
|
|
|
|
bittawm
Legendary
Offline
Activity: 1894
Merit: 1087
|
|
January 01, 2017, 11:51:05 PM |
|
any1 else have problems with fluctuating hash rates
one of my rigs is not working
hash rates are all over the place
with an average rate of 20mhs instead of 100+ (4 cards)
last time my miner did this it said
gpu0 has hanged gpu1 has hanged gpu2 has hanged gpu3 has hanged
then it restarted and worked
|
@bittawm is my real telegram @bittawm is my real twitter beware of impersonators
|
|
|
Blamsud
|
|
January 02, 2017, 10:20:08 AM |
|
any1 else have problems with fluctuating hash rates
one of my rigs is not working
hash rates are all over the place
with an average rate of 20mhs instead of 100+ (4 cards)
last time my miner did this it said
gpu0 has hanged gpu1 has hanged gpu2 has hanged gpu3 has hanged
then it restarted and worked
Check your power supply. It might not be big enough. Or reduce the intensity for all the cards.
|
|
|
|
doktor83
|
|
January 03, 2017, 09:13:13 AM |
|
Claymore
Could you put devfee mining on pools that use username for login, like miningpoolhub, suprnova, etc. , like you have on the ZEC miner ?
That would be awesome.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
January 03, 2017, 09:55:39 AM |
|
Claymore
Could you put devfee mining on pools that use username for login, like miningpoolhub, suprnova, etc. , like you have on the ZEC miner ?
That would be awesome.
Yes it's planned in upcoming release. Unfortunately, I had to postpone it a bit because I decided to release an update for XMR miner firstly (it will be released in 1-2 days).
|
|
|
|
agitato
Newbie
Offline
Activity: 6
Merit: 0
|
|
January 03, 2017, 02:19:30 PM |
|
Claymore, can it only mining Siacoin? without Ethereum?
|
|
|
|
doktor83
|
|
January 03, 2017, 04:02:30 PM |
|
Claymore
Could you put devfee mining on pools that use username for login, like miningpoolhub, suprnova, etc. , like you have on the ZEC miner ?
That would be awesome.
Yes it's planned in upcoming release. Unfortunately, I had to postpone it a bit because I decided to release an update for XMR miner firstly (it will be released in 1-2 days). No problem, i can wait, thank you
|
|
|
|
|