Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fittsy]

yesterday everything working fine but today i am getting too much errros like


ETH: Stratum - Cannot connect to eth-asia1.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20 sec..

ETH: Stratum - socket send failed 10054, disconnect
ETH: Connection lost

ETH: Stratum - socket send failed 10054, disconnect
ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <103.3.62.64> port 9999

Can you pin the above address without any problem? It might be related to your internet service provider.

internet is working fine bro. and i tried this pool also us1.ethpool.org:3333 same error
and how to pin address?
sorry i am newbie

Anyone else having problems with nanopool?

I know from my previous mining of SIA that I frequently found problems with nanopool. (I don't mine SIA any more.) They could be under DDoS or whatever.

Try a different SIA pool and see if you are still having problems.

[1714294798]

1714294798

[1714294798]

1714294798

[1714294798]

1714294798

[1714294798]

1714294798

[1714294798]

1714294798

[maxmad_x]

maxmad_x that's why I've asked:

-dbg   debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
   "-dbg 1" - create log file and show debug messages.

hmm..  you mean crash of miner or whole rig?
how much resources (ram, processor, disk)  do you have?
any info from event viewer?

I have i5-6600K asus z170b mobo, 8gb DDR4 ripjaws 3000 ram, 2 cards in pcie16 slot and one with riser in x1 slot

[shadabahmed]

yesterday everything working fine but today i am getting too much errros like


ETH: Stratum - Cannot connect to eth-asia1.nanopool.org:9999
ETH: Stratum - Failed to connect, retry in 20 sec..

ETH: Stratum - socket send failed 10054, disconnect
ETH: Connection lost

ETH: Stratum - socket send failed 10054, disconnect
ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <103.3.62.64> port 9999

Can you pin the above address without any problem? It might be related to your internet service provider.

internet is working fine bro. and i tried this pool also us1.ethpool.org:3333 same error
and how to pin address?
sorry i am newbie

Maybe he is referring to PING command in CMD. in windows open command prompt or CMD, and TYPE ping eth-asia1.nanopool.org THEN Press enter if you receive replies then your connection is good. :-)

here is the ping result

Pinging eth-asia1.nanopool.org [103.3.62.64] with 32 bytes of data:
Reply from 103.3.62.64: bytes=32 time=300ms TTL=52
Reply from 103.3.62.64: bytes=32 time=328ms TTL=52
Reply from 103.3.62.64: bytes=32 time=314ms TTL=52
Reply from 103.3.62.64: bytes=32 time=316ms TTL=52

Ping statistics for 103.3.62.64:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 300ms, Maximum = 328ms, Average = 314ms

If the ping works then perhaps it is the port that is blocked. Perhaps your firewall/router/proxy is blocking the ports 3333 and 9999.

i tried with cyberghost and everything working fine.

thanksalot all bros. for helping me

[maxmad_x]

Hey @Claymore

Any plans to add controls on updated drivers? is the API for 16.9.2/3 or 16.10 out?

If there is a version that works (power, temp , core clock speed, memory clock speed etc) with later versions of Crimson , that will be great. As almost all the miners are using modified BIOS and 16.7.x needs signed drivers while 16.9 onwards it does not.

Thank you
   

[Claymore]

Hey @Claymore

Any plans to add controls on updated drivers? is the API for 16.9.2/3 or 16.10 out?
If there is a version that works (power, temp , core clock speed, memory clock speed etc) with later versions of Crimson , that will be great. As almost all the miners are using modified BIOS and 16.7.x needs signed drivers while 16.9 onwards it does not.
Thank you

It already works, at least in Windows. For Linux, only temp/fan reading is supported because root access is required to change anything.

[armyman]

Anyone please want to help me with this ? As far as I can see , I dont see an error. No usual OpenCL call error exit... I can't see the error but the miner reboots !

I have 3 rx480s, Win 10, Crimson 16.9.3  and as you can see , for first few lines it has been working at 30.6MH each. then something has happened and the miner crashes. Can someone please help?


20:27:29:198   1590   parse packet: 247
20:27:29:198   1590   eth: job changed
20:27:29:214   1590   new buf size: 0
20:27:29:214   1590   ETH: 10/14/16-20:27:29 - New job from us1.ethpool.org:3333
20:27:29:214   1590   target: 0x0000000112e0be82 (diff: 4000MH), epoch #81
20:27:29:230   1590   ETH - Total Speed: 92.021 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
20:27:29:230   1590   ETH: GPU0 30.688 Mh/s, GPU1 30.634 Mh/s, GPU2 30.699 Mh/s
20:27:30:042   1590   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x57b652a", "0x000000000000000000000000000000000000000000000000000000009563b0cb"]}

20:27:30:089   1590   ETH: checking pool connection...
20:27:30:089   1590   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:27:30:136   1590   got 39 bytes
20:27:30:136   1590   buf: {"id":6,"jsonrpc":"2.0","result":true}

20:27:30:136   1590   parse packet: 38
20:27:30:151   1590   new buf size: 0
20:27:30:230   1590   got 248 bytes
20:27:30:230   1590   buf: {"id":3,"jsonrpc":"2.0","result":["0x78c1694f033caa2116ca25d4d5b99cd7de8f1b0eeef909a511164d263cf4434f","0xbf544f3a8adce8002e4ec2a0af5fc0615ae1508d746c330510cde6f239796be6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2544f9"]}

20:27:30:245   1590   parse packet: 247
20:27:30:245   1590   eth: job is the same
20:27:30:261   1590   new buf size: 0
20:27:30:808   17d0   recv: 51
20:27:30:823   17d0   srv pck: 50
20:27:30:870   17d0   srv bs: 0
20:27:30:886   17d0   sent: 162
20:27:35:824   117c   recv: 51
20:27:35:824   117c   srv pck: 50
20:27:35:871   117c   srv bs: 0
20:27:35:871   117c   sent: 162
20:27:40:121   1590   ETH: checking pool connection...
20:27:40:121   1590   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:27:40:215   1590   got 248 bytes
20:27:40:215   1590   buf: {"id":3,"jsonrpc":"2.0","result":["0x78c1694f033caa2116ca25d4d5b99cd7de8f1b0eeef909a511164d263cf4434f","0xbf544f3a8adce8002e4ec2a0af5fc0615ae1508d746c330510cde6f239796be6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2544f9"]}

20:27:40:231   1590   parse packet: 247
20:27:40:231   1590   eth: job is the same
20:27:40:246   1590   new buf size: 0
20:27:40:824   1468   recv: 51
20:27:40:840   1468   srv pck: 50
20:27:40:887   1468   srv bs: 0
20:27:40:887   1468   sent: 162
20:27:45:825   514   recv: 51
20:27:45:841   514   srv pck: 50
20:27:45:888   514   srv bs: 0
20:27:45:903   514   sent: 162
20:27:47:372   1580   ETH: put share nonce 4ef7ab1c0ff574f1
20:27:47:372   1580   ETH round found 1 shares
20:27:47:388   1590   ETH: 10/14/16-20:27:47 - SHARE FOUND - (GPU 1)
20:27:47:403   1590   send: {"id":4,"method":"eth_submitWork","params":["0x4ef7ab1c0ff574f1","0x78c1694f033caa2116ca25d4d5b99cd7de8f1b0eeef909a511164d263cf4434f","0xf70b5bbcbe4143debf392fc7bb00587fa0901077d9e2652f967a15d56e33db83"]}

20:27:47:497   1590   got 39 bytes
20:27:47:497   1590   buf: {"id":4,"jsonrpc":"2.0","result":true}

20:27:47:497   1590   parse packet: 38
20:27:47:513   1590   ETH: Share accepted (110 ms)!

20:27:47:513   1590   new buf size: 0
20:27:50:060   1590   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x57bb1bb", "0x000000000000000000000000000000000000000000000000000000009563b0cb"]}

20:27:50:138   1590   got 39 bytes
20:27:50:138   1590   buf: {"id":6,"jsonrpc":"2.0","result":true}

20:27:50:154   1590   parse packet: 38
20:27:50:154   1590   new buf size: 0
20:27:50:169   1590   ETH: checking pool connection...
20:27:50:185   1590   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

20:27:50:263   1590   got 248 bytes
20:27:50:263   1590   buf: {"id":3,"jsonrpc":"2.0","result":["0x78c1694f033caa2116ca25d4d5b99cd7de8f1b0eeef909a511164d263cf4434f","0xbf544f3a8adce8002e4ec2a0af5fc0615ae1508d746c330510cde6f239796be6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x2544f9"]}

20:27:50:279   1590   parse packet: 247
20:27:50:279   1590   eth: job is the same
20:27:50:294   1590   new buf size: 0
20:27:50:841   740   recv: 51
20:27:50:857   740   srv pck: 50
20:27:50:904   740   srv bs: 0
20:27:50:904   740   sent: 162
20:27:51:060   1414   GPU0 t=76C fan=40%, GPU1 t=70C fan=32%, GPU2 t=76C fan=40%
20:27:51:060   1414   em hbt: 0, fm hbt: 62,
20:27:51:060   1414   watchdog - thread 0, hb time 187
20:27:51:060   1414   watchdog - thread 1, hb time 500
20:27:51:076   1414   watchdog - thread 2, hb time 562
20:27:51:076   1414   watchdog - thread 3, hb time 250
20:27:51:076   1414   watchdog - thread 4, hb time 328
20:27:51:076   1414   watchdog - thread 5, hb time 15

Have you solved the problem?

Also are your cards overclocked or reference?

[jjiimm_64]

@claymore:

Is there a way we can call the monitoring API directly instead of using the provided EthMan.exe.

I have my own  webmon I would like to use.  just need the json calls/commands.  any documentation?

Jim

[Claymore]

@claymore:
Is there a way we can call the monitoring API directly instead of using the provided EthMan.exe.
I have my own  webmon I would like to use.  just need the json calls/commands.  any documentation?
Jim

No docs currently, but protocol is very easy, you can see it with any sniffer like WireShark.

[jjiimm_64]

@claymore:
Is there a way we can call the monitoring API directly instead of using the provided EthMan.exe.
I have my own  webmon I would like to use.  just need the json calls/commands.  any documentation?
Jim

No docs currently, but protocol is very easy, you can see it with any sniffer like WireShark.

thxs for response.

[amirheavy666]

i used this bat file for eth-Lbry mining
------------------------------------------------
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal mywallet/rig1/myemail -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal myuser.rig2 -dpsw x -dcoin lbc
---------------------------------------------------

But it doesn't work and give me just hashrate for Eth only....what' wrong in my bat file ?please guide
thanks


note:
----------------------------------
I am mining (eth-sia) now successfully too. with (one R9 390x + R9 380 + R9 280x about eth =65 MHZ  and Sia 1000MHZ)
----------------------------------

[fittsy]

i used this bat file for eth-Lbry mining
------------------------------------------------
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool etc-eu1.nanopool.org:19999 -ewal mywallet/rig1/myemail -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal myuser.rig2 -dpsw x -dcoin lbc
---------------------------------------------------

But it doesn't work and give me just hashrate for Eth only....what' wrong in my bat file ?please guide
thanks


note:
----------------------------------
I am mining (eth-sia) now successfully too. with (one R9 390x + R9 380 + R9 280x about eth =65 MHZ  and Sia 1000MHZ)
----------------------------------

I think you need to add -esm 0

That means stratum mode which is what you're using for Suprnova LBC

[giagge]

The best pool for ethereum ? i use nvidia .

[Blamsud]

The best pool for ethereum ? i use nvidia .

I use the Ethpool.org. It is quite good if you have more than 1GH/s. Or you can use the https://www.miningrigrentals.com

[giagge]

The best pool for ethereum ? i use nvidia .

I use the Ethpool.org. It is quite good if you have more than 1GH/s. Or you can use the https://www.miningrigrentals.com

Thanks , i dont put ETH address poloniex or bittrex for mining ? .

[scryptr]

The best pool for ethereum ? i use nvidia .

I use the Ethpool.org. It is quite good if you have more than 1GH/s. Or you can use the https://www.miningrigrentals.com

Thanks , i dont put ETH address poloniex or bittrex for mining ? .

AN EXCHANGE WALLET WILL WORK--

But the attacks on the Ethereum network have left mining deposits in a sluggish state.  A hard-fork fix is scheduled for tomorrow.  If you use GETH, be sure to upgrade after the fork.  Most pools and exchanges will be updating; tomorrow may be a rough day.       --scryptr

[costi.kocev]

Hi,

When I use option :

-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
   "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
   So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line there: "shutdown /r /t 5 /f".

my miner says, that it can not find the reboot.bat, but reboot.bat is in miner directory?

Did someone have idea?

[calculatorduck]

-U --cuda-extragpu-mem 4096 --cuda-streams 1 --cuda-block-size 64 --cuda-grid-size 4096

for genoil

for ccminer i use 1.8.2 with -i 23 no special parameter (but also not specifing intensity is giving me same results)

settings :

70 % power limit

+ 212 core

+ 756 mem

60% fan speed

Temp limit 92 degrees ( videocards at 63 degrees anyway so no problem) power approximately 350  - 370 w from the wall (3x 1070 gtx)

alterantively i could specify no param to genoil and get  70 mhs  to ethereum and  240 from ccminer  with same card specs.

raising power limit and core or mem does not yeld any significant improvement but raising the engery consumed. alternatively there is also possibility to run x11revo  at 11mhs and eth at 9 mhs OR  23 mhs Eth and 6 mhs x11 revo for each card . same settings. Pretty good considering that just x11rev gives 36 mh max on 3 cards ( so 12 mhs per card). power is lower . 320 w

also i wanted to ask why if i put 50 % power the cores do not turbo bost and hangs at  low speed _ they should stay at 1400 - 1500 according to oc but they chill at 1000 slowing greatly eht (happens both with u and genoil... with cc miner instead card does not sit but keep working at full speed)

else 1070 gtx would be best card for eth. 70w @ 34 mhs by solving this issue

I tried these settings on my 1070 and get about 7mh/s on ETH and 200 mh/s on LBRY using genoil and ccminer...doesn't seem good at all. I'm not sure what you're doing if this is working for you.

[zchervonec]

Hello!

Internet infected by new cryptocurrency https://z.cash/. It new way. It start at 28.10.2016. All pre-buy hash zcash at genesis mining. You new version support it?


 

[jjiimm_64]

Hello!

Internet infected by new cryptocurrency https://z.cash/. It new way. It start at 28.10.2016. All pre-buy hash zcash at genesis mining. You new version support it?


 

@claymore..  I dont understand his english very well.. but I am with him on the zcash mining.. can/will you make a gpu miner for zcash..

?
Jim

[Claymore]

Search for "Zcash" in this thread and you will see my answer.