Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order

[Biodom]

there is no 11-28 anymore, replaced by 11-29.
I wonder...if something needed to be added one day later, would you need at least a few days to check it out?
If someone used 11-29 firmware, please post.
I have one B12 miner on 11-25, chip temp are too high. I have another on 7-13 and chip temp are 10-13C lower.

@wolfen or anyone else, maybe we can organize a firmware repository: i am interested in earlier reliable firmware for a 550 mhz machine (my understanding is that 7-13 firmware is just for 600mhz, but I could be wrong). If you can post the 7-13 tar, it would be great.

[1714167311]

1714167311

[1714167311]

1714167311

[mamiakimo]

the new 29Nov damage one board in my machine
after upgrade it start with 0000 hash and i returned to old firmware and this board disappear!

[mamiakimo]

i lost 2 boards this week on old machine B9 600M
because of this stupid firmware's
and they refuse to repair it under warranty

[pupok]

hi, i just got my antminers S9 but they are working at temps over 100, but all my S7 are working under 50 temp, i have good cooling, (with s9 i can not edit the fan speed and its realy quiet it might be the problem) is there a way to activate this setting ?

[mamiakimo]

i create restart by power supply and it returned to work

[pupok]

why  i cant max fan speed manually in S9 but i can in S7?

[wolfen]

why  i cant max fan speed manually in S9 but i can in S7?

Was removed in the firmware.

[wolfen]

there is no 11-28 anymore, replaced by 11-29.
I wonder...if something needed to be added one day later, would you need at least a few days to check it out?
If someone used 11-29 firmware, please post.
I have one B12 miner on 11-25, chip temp are too high. I have another on 7-13 and chip temp are 10-13C lower.

@wolfen or anyone else, maybe we can organize a firmware repository: i am interested in earlier reliable firmware for a 550 mhz machine (my understanding is that 7-13 firmware is just for 600mhz, but I could be wrong). If you can post the 7-13 tar, it would be great.

I believe there is a 7-13 550 firmware. I'm sure I have it on ONE of my pc's. I try to make sure I download every version they kick out there.
11-29? lol

I agree about a repository, I would upload everything I have if there is a persistent location.

[wolfen]

i create restart by power supply and it returned to work

A lot of times power cycle or reboot will clear things up. If not then off to repair.

[gt_addict]

hi, i just got my antminers S9 but they are working at temps over 100, but all my S7 are working under 50 temp, i have good cooling, (with s9 i can not edit the fan speed and its realy quiet it might be the problem) is there a way to activate this setting ?

Have you tried resetting them?? Not sure how on an S9 but im sure it will be in the manual somewhere.

[wolfen]

there is no 11-28 anymore, replaced by 11-29.
I wonder...if something needed to be added one day later, would you need at least a few days to check it out?
If someone used 11-29 firmware, please post.
I have one B12 miner on 11-25, chip temp are too high. I have another on 7-13 and chip temp are 10-13C lower.

@wolfen or anyone else, maybe we can organize a firmware repository: i am interested in earlier reliable firmware for a 550 mhz machine (my understanding is that 7-13 firmware is just for 600mhz, but I could be wrong). If you can post the 7-13 tar, it would be great.

I use the 600M 7-13 on my 550M machines, works ok , you can set the freq and the fans.

[wolfen]

hi, i just got my antminers S9 but they are working at temps over 100, but all my S7 are working under 50 temp, i have good cooling, (with s9 i can not edit the fan speed and its realy quiet it might be the problem) is there a way to activate this setting ?

Have you tried resetting them?? Not sure how on an S9 but im sure it will be in the manual somewhere.

Looks like you have autotune s9's
What version of firmware are you running? What is the speed on the label? The new 11-29 firmware should work well for you with cooler temps.
No fan setting on the new autotunes, it figures out what the speed should be.

[NotFuzzyWarm]

Also be aware that the s7's report only board temps. I take it the temps you are concerned about are the chip temps - not boards right? Can't compare the 2 as the chip temps are always high on the s9's. As in from mid 80's to yes even around 100C.

[Biodom]

@wolfen
I made a filebox for firmware at http://www.filefactory.com
It is password protected for upload. PMed (you are welcome to upload whatever you have re firmware).
I will only accept genuine files (no changes) from people I already know.
Surprisingly, this site does not have https, not sure why.

EDIT: Nevermind, this is a sneaky site.
It told me to setup just the password, but now it requests email addresses and names of uploaders when i NEVER specified this.
Another info collecting entity.

[pupok]

hi, i just got my antminers S9 but they are working at temps over 100, but all my S7 are working under 50 temp, i have good cooling, (with s9 i can not edit the fan speed and its realy quiet it might be the problem) is there a way to activate this setting ?

Have you tried resetting them?? Not sure how on an S9 but im sure it will be in the manual somewhere.

Looks like you have autotune s9's
What version of firmware are you running? What is the speed on the label? The new 11-29 firmware should work well for you with cooler temps.
No fan setting on the new autotunes, it figures out what the speed should be.

where can i see the firmware version? and what speed and label are u talking about?

[babycicak]

hi all, please help, after upgrade my s9 to latest version, i cant hashing anymore.

"Socket connect failed: Connection refused"

my version is 12.93ths, i have set the 600M freq, but still cant make any hashing.

please help...

[philipma1957]

hi all, please help, after upgrade my s9 to latest version, i cant hashing anymore.

"Socket connect failed: Connection refused"

my version is 12.93ths, i have set the 600M freq, but still cant make any hashing.

please help...

first look at the mirror and curse at your self for doing a firmware upgrade when your gear was working.

next power down.  wait 5 minutes  power up

then wait 1 hour and check your gui

good luck bro

[babycicak]

  1 hour? you serious?

[NotFuzzyWarm]

1 hour? you serious?

To see how it is really doing, yes he is.
That said, check every 10 min or so though. The socket connection error is from the hash boards being busy with their auto-tuning. The hardware (hash boards) will connect to the miner software when it is finished.

[babycicak]

how to role back to old version? it's possible to do that ?