|
xleejohnx
|
 |
March 12, 2017, 07:27:25 PM |
|
I pm'd and emailed.
Note I have 2 accounts one is just the pandaminer one is 8 pc's
they uses separate emails.
So far I am in for 0.03121111 btc. I will send more. Down the road.
note I am sending the coin with my bittrex.com account
It's well worth the btc I sent Now I dont have to coustom bios anymore Having to keep up with all the original bios for all the gpus I have like 6 or 7 different brands all different memory and models This helps a ton and take a headache away |
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
|
thedue
|
|
March 12, 2017, 07:31:22 PM |
|
I pm'd and emailed.
Note I have 2 accounts one is just the pandaminer one is 8 pc's
they uses separate emails.
So far I am in for 0.03121111 btc. I will send more. Down the road.
note I am sending the coin with my bittrex.com account
It's well worth the btc I sent Now I dont have to coustom bios anymore Having to keep up with all the original bios for all the gpus I have like 6 or 7 different brands all different memory and models This helps a ton and take a headache away no memstrap?!  btw@all what are you settings for the best W / Hash ratio? Still experiencing with 1050 gpu and 1850 or 1900 / 1950 mem since my energy price is pretty high |
|
|
|
|
tytanick (OP)
Legendary
 Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 07:41:38 PM |
|
I pm'd and emailed.
Note I have 2 accounts one is just the pandaminer one is 8 pc's
they uses separate emails.
So far I am in for 0.03121111 btc. I will send more. Down the road.
note I am sending the coin with my bittrex.com account
It's well worth the btc I sent Now I dont have to coustom bios anymore Having to keep up with all the original bios for all the gpus I have like 6 or 7 different brands all different memory and models This helps a ton and take a headache away xleejohnx no, it wont work that way i suppose. You need to veryfy this. This overclocks a little bit but not too much. In my case i had to make offset undervolting custom mod + timings ofcourse and on top of this i set undervolt 3 and now its all good. Anyway this undervolt is not what you think, please verify this. If you can do the test how much power system takes with stock bios + my "dummy undervolt" VS modded bios + dummy undervolt as well. In my case i have 2 and they work ok together. |
|
|
|
|
xleejohnx
|
|
March 12, 2017, 07:45:31 PM |
|
I pm'd and emailed.
Note I have 2 accounts one is just the pandaminer one is 8 pc's
they uses separate emails.
So far I am in for 0.03121111 btc. I will send more. Down the road.
note I am sending the coin with my bittrex.com account
It's well worth the btc I sent Now I dont have to coustom bios anymore Having to keep up with all the original bios for all the gpus I have like 6 or 7 different brands all different memory and models This helps a ton and take a headache away no memstrap?! btw@all what are you settings for the best W / Hash ratio? Still experiencing with 1050 gpu and 1850 or 1900 / 1950 mem since my energy price is pretty high On eth 1950/1850 mem give so close to the same 1950-27mhs 1850-26.8mhs 1850 uses less watts Plus i only run my core at 1130 due to sometimes I move over to xmr and it needs more core 1050 is fine on eth I probably won't do memstrap anymore It does give 3mhs right out the gate but resale if I don't keep the original bios to move the mem back It could hurt me in the long run if my buyer found out |
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 07:46:24 PM |
|
no memstrap?! btw@all what are you settings for the best W / Hash ratio? Still experiencing with 1050 gpu and 1850 or 1900 / 1950 mem since my energy price is pretty high Myself i have memstrap from 1500 then i have 1050/1930-1980 Undervolt offset -112-150mv in VBIOS (i have all gigabyte RX470) Anyway 1 rig with 6 GPUS x RX470 doing 158.01 MH/s ETC at 750-800 watts from wall On top of that i belive we can make those gpus running to 29MH+ because of custom timings (not copying from 1500 to above) Anyway one guy that i wanted to buy this strap for my cards didnt wanted to sell me eventually. If anybody have custom timing strap for RX470 gpus *hynix) then please write to me at admin@simplemining.net - i could buy it if results will be 29MH+ from my gpus  |
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 07:48:38 PM |
|
It could hurt me in the long run if my buyer found out
So just flash back those before you sell. There are original bioses all areound, also its better to make original yourself. Anyway hmmm i think user would be happy that gpu works better than normally  right ? |
|
|
|
|
thedue
|
|
March 12, 2017, 08:23:42 PM |
|
For ETH yeah, right now I'm on XMR getting 630 H/s with 1050 / 1850 per gpu pulling 605W at wall with 6 gpu. I think more GPU clock would only bring the energy consumption up... anyone who can deny that? You can pull around 10 Hash more for every 50 memclock and this brings you 1-2W per gpu up.
Strapmod bios only. Maybe I should try playing around with uv and TDP etc like Tytanick
|
|
|
|
|
|
Beave162
|
|
March 12, 2017, 08:36:40 PM |
|
tytanick,
What program are you using to undervolt offset (112-1150mV) in VBIOS? Is it Poloaris Bios Editor or something else?
|
YaCoin: YL5kf54wPPXKsXd5T18xCaNkyUsS1DgY7z
BitCoin: 14PFbLyUdTyxZg3V8hnvj5VXkx3dhthmDj
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 08:39:43 PM |
|
tytanick,
What program are you using to undervolt offset (112-1150mV) in VBIOS? Is it Poloaris Bios Editor or something else?
HxD Hex Editor |
|
|
|
|
Beave162
|
|
March 12, 2017, 09:14:42 PM |
|
tytanick,
What program are you using to undervolt offset (112-1150mV) in VBIOS? Is it Poloaris Bios Editor or something else?
HxD Hex Editor Ok that is a new one to me. Thank you! *Correction* (112-150mV) |
YaCoin: YL5kf54wPPXKsXd5T18xCaNkyUsS1DgY7z
BitCoin: 14PFbLyUdTyxZg3V8hnvj5VXkx3dhthmDj
|
|
|
|
Beave162
|
|
March 12, 2017, 09:29:18 PM |
|
What's your btc address I'll help offset that price.
My BTC address is this DONATIONS GOES HERE: 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVDIf anybody will send me some cash, please write me email to admin@simplemining.net with tx info and amount with your email that you are using in simplemining.net . It would be not so good if you guys send me some cash now and i will implement in some near time fee system, you would pay double, thats why please send me email. I'm already seeing improvements to my rigs! Here is a very small donation for what is the best crypto-mining management, monitoring system in existence! Based on the your receptiveness and capabilities, tytanick, I imagine it will the best system out there for some time to come, if not forever. Thank you! txid: 5d39bb2b0af38f108a4069276413ae7605ba03edccfb30a40025e6e86a23c6a7 |
YaCoin: YL5kf54wPPXKsXd5T18xCaNkyUsS1DgY7z
BitCoin: 14PFbLyUdTyxZg3V8hnvj5VXkx3dhthmDj
|
|
|
|
bughatti
|
|
March 12, 2017, 09:59:52 PM |
|
Hey tytanick, I redid my rack a different way today. After plugging all 3 rigs back in i seem to be getting alot of low memory errors, gpu hangs in opencl. I have not changed anything with my cards and I am running anoraks OC rom. It was all working fine before I turned everything off so the only difference is I see I went to 1077 and I see alot of talks about the OC stuff. Could the voltage be causing problems with my already clocked cards?
|
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 10:12:31 PM |
|
Hey tytanick, I redid my rack a different way today. After plugging all 3 rigs back in i seem to be getting alot of low memory errors, gpu hangs in opencl. I have not changed anything with my cards and I am running anoraks OC rom. It was all working fine before I turned everything off so the only difference is I see I went to 1077 and I see alot of talks about the OC stuff. Could the voltage be causing problems with my already clocked cards?
I dont think so, You have in mind RX OS right ? IF you had old values like dpm level + memory OC in % then you shoudl be getting exactly the same thing as before update. The new system is only active when you enter core and memory in MHz so core: 300-1500 memory: 300-3000 Only then if calues are in this range , the new overclocking system kicks in. So if you have old values then nothing should changed. |
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 10:14:03 PM |
|
I'm already seeing improvements to my rigs!
Here is a very small donation for what is the best crypto-mining management, monitoring system in existence! Based on the your receptiveness and capabilities, tytanick, I imagine it will the best system out there for some time to come, if not forever. Thank you!
Best ? And why not ethos  ? |
|
|
|
|
bughatti
|
|
March 12, 2017, 10:49:11 PM |
|
Hey tytanick, I redid my rack a different way today. After plugging all 3 rigs back in i seem to be getting alot of low memory errors, gpu hangs in opencl. I have not changed anything with my cards and I am running anoraks OC rom. It was all working fine before I turned everything off so the only difference is I see I went to 1077 and I see alot of talks about the OC stuff. Could the voltage be causing problems with my already clocked cards?
I dont think so, You have in mind RX OS right ? IF you had old values like dpm level + memory OC in % then you shoudl be getting exactly the same thing as before update. The new system is only active when you enter core and memory in MHz so core: 300-1500 memory: 300-3000 Only then if calues are in this range , the new overclocking system kicks in. So if you have old values then nothing should changed. Ok so taking out the mhz in core and mem fixed the issue, leaving the default to 5 in undervolting. I went back in and reflashed all cards to be safe also |
|
|
|
|
tytanick (OP)
Legendary
Offline
Activity: 2660
Merit: 1096
Simplemining.net Admin
|
|
March 12, 2017, 10:51:06 PM |
|
Ok so taking out the mhz in core and mem fixed the issue, leaving the default to 5 in undervolting. I went back in and reflashed all cards to be safe also
So you accualy changes something and then booted those rigs ? Tell me how did you proceed. What was wrong and how you fixed ? |
|
|
|
|
bughatti
|
|
March 12, 2017, 11:07:59 PM |
|
Ok so taking out the mhz in core and mem fixed the issue, leaving the default to 5 in undervolting. I went back in and reflashed all cards to be safe also
So you accualy changes something and then booted those rigs ? Tell me how did you proceed. What was wrong and how you fixed ? First I ssh'd in and reflashed all the cards with my rom, after you replied with your thoughts, I went in the OC settings on the dashboard and took out core mhz and memory mhz and left them blank. |
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
|
March 13, 2017, 12:05:29 AM |
|
40 Rigs/ down with your new tool i can`t get them working anymore.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4130
Merit: 7929
'The right to privacy matters'
|
|
March 13, 2017, 12:14:51 AM
Last edit: March 13, 2017, 01:10:23 AM by philipma1957 |
|
40 Rigs/ down with your new tool i can`t get them working anymore.
yeah i did that.. mine are all back up. can you access the rigs? I powered all of mine off. turned on one and set new settings. I have 9 rigs various gpus I have 1 rig pandaminer I use 2 emails all is well now. took an hour to fix. nine rigs most set to 2 for undervolt and stock core stock me clocks rig Philipma1957Asus3 is flakey just a bit rig Philipma1957E wants 3 for underplot not 2 this is my multi rig email my panda miner email with 1 panda miner is a bit weird but pool side it hashs correctly.  https://i.imgur.com/khKwWjh.png |
|
|
|
|
TheYankeesWin!
|
|
March 13, 2017, 01:12:15 AM |
|
40 Rigs/ down with your new tool i can`t get them working anymore.
yeah i did that.. mine are all back up. can you access the rigs? I powered all of mine off. turned on one and set new settings. I have 9 rigs various gpus I have 1 rig pandaminer I use 2 emails all is well now. took an hour to fix. nine rigs most set to 2 for undervolt and stock core stock me clocks rig Philipma1957Asus3 is flakey just a bit rig Philipma1957E wants 3 for underplot not 2 this is my multi rig email my panda miner email with 1 panda miner is a bit weird but pool side it hashs correctly.  did you forget to put the img for the pandaminer? I fixed it. |
|
|
|
|
|
