[ANN][ELE] Elementrem - Smartcontract BlockChain | More Fast, More convenient

[scorpio18]

No pool support Nicehash ?

Nicehash is supporting just ethereum , no support for elementrem sry

NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same)

0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool)
1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools)
1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.)
2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.)

You can setup your pool for using on a NiceHash order like this:



WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue:

https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427

and implement this fix:

https://github.com/sammy007/open-ethereum-pool/pull/48


Best regards,
NiceHash team.

Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/  and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to

[1714804021]

1714804021

[1714804021]

1714804021

[1714804021]

1714804021

[killerjoegreece]

No pool support Nicehash ?

Nicehash is supporting just ethereum , no support for elementrem sry

NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same)

0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool)
1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools)
1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.)
2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.)

You can setup your pool for using on a NiceHash order like this:



WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue:

https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427

and implement this fix:

https://github.com/sammy007/open-ethereum-pool/pull/48


Best regards,
NiceHash team.

Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/  and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to

you know if i can mine there with a gt630m?

[minerjoen]

No pool support Nicehash ?

Nicehash is supporting just ethereum , no support for elementrem sry

NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same)

0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool)
1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools)
1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.)
2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.)

You can setup your pool for using on a NiceHash order like this:



WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue:

https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427

and implement this fix:

https://github.com/sammy007/open-ethereum-pool/pull/48


Best regards,
NiceHash team.

Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/  and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to

you know if i can mine there with a gt630m?

Only if u want that ur laptop catch fire and blow up himself.

Laptops are not made for mining.

U can beter spam on every new topic for make translations

[minerjoen]

No pool support Nicehash ?

Nicehash is supporting just ethereum , no support for elementrem sry

NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same)

0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool)
1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools)
1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.)
2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.)

You can setup your pool for using on a NiceHash order like this:



WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue:

https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427

and implement this fix:

https://github.com/sammy007/open-ethereum-pool/pull/48


Best regards,
NiceHash team.

Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/  and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to

I send u an PM for add something to ur pool.

[killerjoegreece]

No pool support Nicehash ?

Nicehash is supporting just ethereum , no support for elementrem sry

NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same)

0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool)
1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools)
1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.)
2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.)

You can setup your pool for using on a NiceHash order like this:



WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue:

https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427

and implement this fix:

https://github.com/sammy007/open-ethereum-pool/pull/48


Best regards,
NiceHash team.

Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/  and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to

you know if i can mine there with a gt630m?

Only if u want that ur laptop catch fire and blow up himself.

Laptops are not made for mining.

U can beter spam on every new topic for make translations

lol you are probably right

[minerjoen]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

[killerjoegreece]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

stick around. dev will respond to these soon

[RFKotyara]

https://www.livecoin.net/voting/index?vote=Elementrem Go Go!

[minerjoen]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

stick around. dev will respond to these soon

okidoki

[killerjoegreece]

https://www.livecoin.net/voting/index?vote=Elementrem Go Go!

im doing now

[elementrem]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

stick around. dev will respond to these soon

1. it is five.
2. just run gele with rpc option, and run eleminer -G
   https://github.com/elementrem/webthree-umbrella/blob/master/GPU_mining_command.md

thank you for your interest!

[minerjoen]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

stick around. dev will respond to these soon

1. it is five.
2. just run gele with rpc option, and run eleminer -G
   https://github.com/elementrem/webthree-umbrella/blob/master/GPU_mining_command.md

thank you for your interest!

Thanks for your reply, i will check that out as soon as possible (i will compare the block founds x 5 and the payouts i get on the pool)

Anyway, compliments about this coin, wallet looks very good, works nice and fast. Nothing bad to say.

Edit: fast calculation, i get less coins then i found blocks. So like: 100 blocks found and the payout is like 450, so i miss 50 coins.
I guess i need to setup the solo mining.

Edit 2: tried the solo mining using github:
JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner  13:53:43.977|main  Getting work package...
  X  13:53:45.182|main  Failed to submit hashrate.
  X  13:53:45.186|main  Dynamic exception type: class jsonrpc::JsonRpcException
std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075

[elementrem]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

stick around. dev will respond to these soon

1. it is five.
2. just run gele with rpc option, and run eleminer -G
   https://github.com/elementrem/webthree-umbrella/blob/master/GPU_mining_command.md

thank you for your interest!

Thanks for your reply, i will check that out as soon as possible (i will compare the block founds x 5 and the payouts i get on the pool)

Anyway, compliments about this coin, wallet looks very good, works nice and fast. Nothing bad to say.

Edit: fast calculation, i get less coins then i found blocks. So like: 100 blocks found and the payout is like 450, so i miss 50 coins.
I guess i need to setup the solo mining.

Edit 2: tried the solo mining using github:
JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner  13:53:43.977|main  Getting work package...
  X  13:53:45.182|main  Failed to submit hashrate.
  X  13:53:45.186|main  Dynamic exception type: class jsonrpc::JsonRpcException
std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075

Thank you very much for such compliments. sir.

Edit 2: tried the solo mining using github:
JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner  13:53:43.977|main  Getting work package...
  X  13:53:45.182|main  Failed to submit hashrate.
  X  13:53:45.186|main  Dynamic exception type: class jsonrpc::JsonRpcException
std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075

It did not open the RPC of "gele"
Opening the RPC There are two ways.

Here is the easiest way.
1. run Elementre-Wallet
2. open cmd mode (C:\windows\system32\cmd.exe)
3. Go to "gele" path in cmd mode (cd <Elementrem-Wallet path>\resources\node\gele)
4. run command gele attach
5. in gele console mode
   run web3.admin.startRPC()   (RPC open command in console) // case-sensitive

If you have some confusion, I would provide the some batch file. sir.

[elementrem]

Block Explorer was updated as It is possible to see address balance information  
Across the board this explorer needs a big shake-up.
It'll take time but I'll make it.

[minerjoen]

Block Explorer was updated as It is possible to see address balance information  
Across the board this explorer needs a big shake-up.
It'll take time but I'll make it.

I will try that solo mining tomorrow, for now i am using an pool for mining.

About that gele atach tomorrow (read something about it on the git)

[minerjoen]

Hey guys!

2 Questions:

What is the block reward?
How to solo mine?

I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.

stick around. dev will respond to these soon

1. it is five.
2. just run gele with rpc option, and run eleminer -G
   https://github.com/elementrem/webthree-umbrella/blob/master/GPU_mining_command.md

thank you for your interest!

Thanks for your reply, i will check that out as soon as possible (i will compare the block founds x 5 and the payouts i get on the pool)

Anyway, compliments about this coin, wallet looks very good, works nice and fast. Nothing bad to say.

Edit: fast calculation, i get less coins then i found blocks. So like: 100 blocks found and the payout is like 450, so i miss 50 coins.
I guess i need to setup the solo mining.

Edit 2: tried the solo mining using github:
JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner  13:53:43.977|main  Getting work package...
  X  13:53:45.182|main  Failed to submit hashrate.
  X  13:53:45.186|main  Dynamic exception type: class jsonrpc::JsonRpcException
std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075

Thank you very much for such compliments. sir.

Edit 2: tried the solo mining using github:
JSON-RPC problem. Probably couldn't connect. Retrying in 1...
miner  13:53:43.977|main  Getting work package...
  X  13:53:45.182|main  Failed to submit hashrate.
  X  13:53:45.186|main  Dynamic exception type: class jsonrpc::JsonRpcException
std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075

It did not open the RPC of "gele"
Opening the RPC There are two ways.

Here is the easiest way.
1. run Elementre-Wallet
2. open cmd mode (C:\windows\system32\cmd.exe)
3. Go to "gele" path in cmd mode (cd <Elementrem-Wallet path>\resources\node\gele)
4. run command gele attach
5. in gele console mode
   run web3.admin.startRPC()   (RPC open command in console) // case-sensitive

If you have some confusion, I would provide the some batch file. sir.

Couldnt wait

What i did was step 1 till 5
After i started my ''run''.bat file (should be STEP 6 haha) and i think i'm mining, i see the hash rate, he is connected.. Now i will wait till some blocks roll in (i will test for 2 hours, if nothing happen i switch back to pool and check again tomorrow)

Thanks for the help!

[minerjoen]

Block Explorer was updated as It is possible to see address balance information  
Across the board this explorer needs a big shake-up.
It'll take time but I'll make it.

Nice!

Keep up the good work dev.

any plans about an exchange? Or want to go slow but good/strong?
Till the time, my miners are running.

[minerjoen]

Solo mining is working, transactions are comming. Its good till more people join, later i will go back to pools, for now solo is working beter for me i see.

Used the way u told, perfect!

[elementrem]

Block Explorer was updated as It is possible to see address balance information  
Across the board this explorer needs a big shake-up.
It'll take time but I'll make it.

Nice!

Keep up the good work dev.

any plans about an exchange? Or want to go slow but good/strong?
Till the time, my miners are running.

Thank you!

exchange vote list
https://www.livecoin.net/voting/index?vote=Elementrem
https://c-cex.com/?id=vote

One day Elementrem would show up looking triumphant and wonderful.

[elementrem]

Français ANN(by kaicrypzen) 

https://bitcointalk.org/index.php?topic=1571993