scorpio18
Legendary
Offline
Activity: 1722
Merit: 1000
Admin of CoinMiners Pools
|
|
July 31, 2016, 03:54:16 PM |
|
No pool support Nicehash ?
Nicehash is supporting just ethereum , no support for elementrem sry NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same) 0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool) 1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools) 1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.) 2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.) You can setup your pool for using on a NiceHash order like this: WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue: https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427and implement this fix: https://github.com/sammy007/open-ethereum-pool/pull/48Best regards, NiceHash team. Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/ and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to
|
|
|
|
killerjoegreece
Legendary
Offline
Activity: 1680
Merit: 1010
Professional Native Greek Translator (2000+ done)
|
|
July 31, 2016, 03:58:37 PM |
|
No pool support Nicehash ?
Nicehash is supporting just ethereum , no support for elementrem sry NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same) 0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool) 1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools) 1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.) 2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.) You can setup your pool for using on a NiceHash order like this: WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue: https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427and implement this fix: https://github.com/sammy007/open-ethereum-pool/pull/48Best regards, NiceHash team. Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/ and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to you know if i can mine there with a gt630m?
|
|
|
|
minerjoen
|
|
July 31, 2016, 05:02:45 PM |
|
No pool support Nicehash ?
Nicehash is supporting just ethereum , no support for elementrem sry NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same) 0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool) 1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools) 1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.) 2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.) You can setup your pool for using on a NiceHash order like this: WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue: https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427and implement this fix: https://github.com/sammy007/open-ethereum-pool/pull/48Best regards, NiceHash team. Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/ and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to you know if i can mine there with a gt630m? Only if u want that ur laptop catch fire and blow up himself. Laptops are not made for mining. U can beter spam on every new topic for make translations
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
minerjoen
|
|
July 31, 2016, 05:06:29 PM |
|
No pool support Nicehash ?
Nicehash is supporting just ethereum , no support for elementrem sry NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same) 0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool) 1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools) 1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.) 2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.) You can setup your pool for using on a NiceHash order like this: WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue: https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427and implement this fix: https://github.com/sammy007/open-ethereum-pool/pull/48Best regards, NiceHash team. Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/ and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to I send u an PM for add something to ur pool.
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
killerjoegreece
Legendary
Offline
Activity: 1680
Merit: 1010
Professional Native Greek Translator (2000+ done)
|
|
July 31, 2016, 05:13:26 PM |
|
No pool support Nicehash ?
Nicehash is supporting just ethereum , no support for elementrem sry NiceHash fully supports any Ethereum fork / altcoin; and supports several stratum variants (we're mentioning also Ethereum pools below, just for reference, we're aware that this thread is about ELE, but pool technology is the same) 0- the "early stratum" (it was used by ethpool, ethermine, coinotron, mph, nanopool) 1.1- the eth-proxy (aka dwarfpool) style (used by dwarfpool and some other pools) 1.2- the eth-proxy-sammy (used by all pools, based on open-source https://github.com/sammy007/open-ethereum-pool; for example https://ethc.coin-miners.info, http://ethc.epool.io/, etc.) 2- the standardized EthereumStratum/1.0.0: this is the preferred one, documented here, supported by coinotron, hitchpool, etc.) You can setup your pool for using on a NiceHash order like this: WARNING: this CoinMiners Elementrem Pool seems to be poorly configured since it's dropping connection. So, CoinMiners, please make a testing order from NiceHash to your pool and fix the disconnects. Also, check out this sammy's pool issue: https://github.com/sammy007/open-ethereum-pool/issues/42#issuecomment-235638427and implement this fix: https://github.com/sammy007/open-ethereum-pool/pull/48Best regards, NiceHash team. Just to let you know i have aplied that fix to my stratums , so ETC and ELE pools both works just fine with https://ethc.coin-miners.info/ and http://ele.coin-miners.info/ , i just tested few minutes ago and i found a block on ELE , so guys you can rent hash from nicehash and point it to http://ele.coin-miners.info/ on the stratum port stratum.coin-miners.info:8010 and the modified ethminer works on my pool to you know if i can mine there with a gt630m? Only if u want that ur laptop catch fire and blow up himself. Laptops are not made for mining. U can beter spam on every new topic for make translations lol you are probably right
|
|
|
|
minerjoen
|
|
August 01, 2016, 08:50:05 AM |
|
Hey guys!
2 Questions:
What is the block reward? How to solo mine?
I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
killerjoegreece
Legendary
Offline
Activity: 1680
Merit: 1010
Professional Native Greek Translator (2000+ done)
|
|
August 01, 2016, 09:14:39 AM |
|
Hey guys!
2 Questions:
What is the block reward? How to solo mine?
I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.
stick around. dev will respond to these soon
|
|
|
|
RFKotyara
Member
Offline
Activity: 63
Merit: 10
|
|
August 01, 2016, 09:40:04 AM |
|
|
|
|
|
minerjoen
|
|
August 01, 2016, 09:45:11 AM |
|
Hey guys!
2 Questions:
What is the block reward? How to solo mine?
I see i find some nice blocks on acc-pool but the rewards is like nothing for finding a block.
stick around. dev will respond to these soon okidoki
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
killerjoegreece
Legendary
Offline
Activity: 1680
Merit: 1010
Professional Native Greek Translator (2000+ done)
|
|
August 01, 2016, 10:05:16 AM |
|
|
|
|
|
|
minerjoen
|
|
August 01, 2016, 11:24:22 AM Last edit: August 01, 2016, 11:55:17 AM by minerjoen |
|
Thanks for your reply, i will check that out as soon as possible (i will compare the block founds x 5 and the payouts i get on the pool) Anyway, compliments about this coin, wallet looks very good, works nice and fast. Nothing bad to say. Edit: fast calculation, i get less coins then i found blocks. So like: 100 blocks found and the payout is like 450, so i miss 50 coins. I guess i need to setup the solo mining. Edit 2: tried the solo mining using github: JSON-RPC problem. Probably couldn't connect. Retrying in 1... miner 13:53:43.977|main Getting work package... X 13:53:45.182|main Failed to submit hashrate. X 13:53:45.186|main Dynamic exception type: class jsonrpc::JsonRpcException std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
elementrem (OP)
|
|
August 01, 2016, 03:32:44 PM Last edit: August 01, 2016, 03:47:29 PM by elementrem |
|
Thanks for your reply, i will check that out as soon as possible (i will compare the block founds x 5 and the payouts i get on the pool) Anyway, compliments about this coin, wallet looks very good, works nice and fast. Nothing bad to say. Edit: fast calculation, i get less coins then i found blocks. So like: 100 blocks found and the payout is like 450, so i miss 50 coins. I guess i need to setup the solo mining. Edit 2: tried the solo mining using github: JSON-RPC problem. Probably couldn't connect. Retrying in 1... miner 13:53:43.977|main Getting work package... X 13:53:45.182|main Failed to submit hashrate. X 13:53:45.186|main Dynamic exception type: class jsonrpc::JsonRpcException std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075 Thank you very much for such compliments. sir. Edit 2: tried the solo mining using github: JSON-RPC problem. Probably couldn't connect. Retrying in 1... miner 13:53:43.977|main Getting work package... X 13:53:45.182|main Failed to submit hashrate. X 13:53:45.186|main Dynamic exception type: class jsonrpc::JsonRpcException std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075It did not open the RPC of "gele" Opening the RPC There are two ways. Here is the easiest way. 1. run Elementre-Wallet 2. open cmd mode (C:\windows\system32\cmd.exe) 3. Go to "gele" path in cmd mode (cd <Elementrem-Wallet path>\resources\node\gele) 4. run command gele attach 5. in gele console mode run web3.admin.startRPC() (RPC open command in console) // case-sensitive If you have some confusion, I would provide the some batch file. sir.
|
|
|
|
elementrem (OP)
|
|
August 01, 2016, 06:27:19 PM |
|
Block Explorer was updated as It is possible to see address balance information Across the board this explorer needs a big shake-up. It'll take time but I'll make it.
|
|
|
|
minerjoen
|
|
August 01, 2016, 06:43:23 PM |
|
Block Explorer was updated as It is possible to see address balance information Across the board this explorer needs a big shake-up. It'll take time but I'll make it. I will try that solo mining tomorrow, for now i am using an pool for mining. About that gele atach tomorrow (read something about it on the git)
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
minerjoen
|
|
August 01, 2016, 06:48:23 PM |
|
Thanks for your reply, i will check that out as soon as possible (i will compare the block founds x 5 and the payouts i get on the pool) Anyway, compliments about this coin, wallet looks very good, works nice and fast. Nothing bad to say. Edit: fast calculation, i get less coins then i found blocks. So like: 100 blocks found and the payout is like 450, so i miss 50 coins. I guess i need to setup the solo mining. Edit 2: tried the solo mining using github: JSON-RPC problem. Probably couldn't connect. Retrying in 1... miner 13:53:43.977|main Getting work package... X 13:53:45.182|main Failed to submit hashrate. X 13:53:45.186|main Dynamic exception type: class jsonrpc::JsonRpcException std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075 Thank you very much for such compliments. sir. Edit 2: tried the solo mining using github: JSON-RPC problem. Probably couldn't connect. Retrying in 1... miner 13:53:43.977|main Getting work package... X 13:53:45.182|main Failed to submit hashrate. X 13:53:45.186|main Dynamic exception type: class jsonrpc::JsonRpcException std::exception::what: Exception -32003 : Client connector error: libcurl error: 7 -> Could not connect to http://127.0.0.1:7075It did not open the RPC of "gele" Opening the RPC There are two ways. Here is the easiest way. 1. run Elementre-Wallet 2. open cmd mode (C:\windows\system32\cmd.exe) 3. Go to "gele" path in cmd mode (cd <Elementrem-Wallet path>\resources\node\gele) 4. run command gele attach 5. in gele console mode run web3.admin.startRPC() (RPC open command in console) // case-sensitive If you have some confusion, I would provide the some batch file. sir. Couldnt wait What i did was step 1 till 5 After i started my ''run''.bat file (should be STEP 6 haha) and i think i'm mining, i see the hash rate, he is connected.. Now i will wait till some blocks roll in (i will test for 2 hours, if nothing happen i switch back to pool and check again tomorrow) Thanks for the help!
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
minerjoen
|
|
August 01, 2016, 07:35:57 PM |
|
Block Explorer was updated as It is possible to see address balance information Across the board this explorer needs a big shake-up. It'll take time but I'll make it. Nice! Keep up the good work dev. any plans about an exchange? Or want to go slow but good/strong? Till the time, my miners are running.
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
minerjoen
|
|
August 01, 2016, 07:58:26 PM |
|
Solo mining is working, transactions are comming. Its good till more people join, later i will go back to pools, for now solo is working beter for me i see.
Used the way u told, perfect!
|
Bitcoin: 1GPjrqoWGQfqyCEYnPhbA3nWN9dmMwFHRE Elementrem: 0xF4789b95826C4474B3E7C780Fd90f639b51C4B6c
|
|
|
elementrem (OP)
|
|
August 01, 2016, 09:05:45 PM Last edit: August 02, 2016, 02:17:33 AM by elementrem |
|
Block Explorer was updated as It is possible to see address balance information Across the board this explorer needs a big shake-up. It'll take time but I'll make it. Nice! Keep up the good work dev. any plans about an exchange? Or want to go slow but good/strong? Till the time, my miners are running. Thank you! exchange vote list https://www.livecoin.net/voting/index?vote=Elementremhttps://c-cex.com/?id=voteOne day Elementrem would show up looking triumphant and wonderful.
|
|
|
|
|
|