gsanjin
Member
Offline
Activity: 191
Merit: 12
|
|
February 22, 2018, 11:25:18 AM |
|
Hey guys, Im new at mining Currently bought 3 GPU Asus GTX 1060 6GB and mine on Nicehash Is there any tips what profitable algo to mine? and what is good setting with Msi Afterburner for the GPU? Thanks whattomine.com and just previous page or two you can find some general recommendations for 1060/3GB ... I just done reading and decided the setting of my 3 gtx 1060 6gb use Msi Afterburner 1x gtx 1060 6gb (micron) power limit 70, coreclock -400, memclock +602, Algo DaggerHashimoto(EthDcrMiner64), 23MH/s with temp 60 C 2x gtx 1060 6gb (hynix) power limit 80, coreclock +122, memclock +220, Algo Equihash(ewbf), 290 - 299 sol/s each, with temp 60 C total earnings 46k satoshis/day is this setting okay? Thanks Considering first card have micron mem, it's ok. For equihash you can oc a little more core & mem, but not needed. Use dstm miner for equihash algo coins, it gives few % more sol/s than ewbf. BTW, nicehash is hassle free (no worry about pools, wallets, exchanges, etc) but there you are mining for someone else and mining profits can be lower upto 30% than if you mined your currently profitable coins directly.
|
|
|
|
MelTronic
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 22, 2018, 01:44:22 PM |
|
I have Asus GTX 1060 0C 6G (dual fan) and mining on Nicehash with settings 90% power, +145core, +500memory, T=~45°C. Most profitable algo is Equihash with ~330-340 Sols/s.
Can I get more profit from mining something else then Nicehash? Whitetomine.com shows most profitable "Ethash" but in software itself is vice-versa.
|
|
|
|
vladutz1186
Jr. Member
Offline
Activity: 39
Merit: 2
|
|
February 22, 2018, 08:28:19 PM |
|
vladutz1186, yes you can lower power limit.
Thanks, I`ll try that !
|
|
|
|
osem
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 23, 2018, 05:14:21 AM |
|
hi,
i have 6x 1060 gtx 6gt rig on MSİ Z270A-PRO
i get 25 mhs from 4 cards, other 2 cards gives 20 mhs. clock settings are same. OS is win 10, i am using claymores miner. Any suggestions?
hello again, i checked cable connections, checked psu, all are correct. I changed os to ethos sat up again, hashrates are same. still 2 cards gives 20mhs, 4 cards gives 25 mhs. I realized something, near 4 cards written name that GTX 1060 6GT, other 2 cards written name GTX 1060 6GT Rev. 2. what is differences between them, how can i fix it?
|
|
|
|
samy_sa
|
|
February 23, 2018, 08:05:33 AM |
|
Tried to search on different topics and blogs and couldn't find the exact results.
So, what is the hashrate of GTX 1060 on different algos? Especially on Ether.
it is depend on some parameters, I use windos 10 and my hash rate is around 18-27.5 MH/s. what is your hashrate? more than this or your hashrate low than this?
|
|
|
|
gsanjin
Member
Offline
Activity: 191
Merit: 12
|
|
February 23, 2018, 09:38:49 AM |
|
hi,
i have 6x 1060 gtx 6gt rig on MSİ Z270A-PRO
i get 25 mhs from 4 cards, other 2 cards gives 20 mhs. clock settings are same. OS is win 10, i am using claymores miner. Any suggestions?
hello again, i checked cable connections, checked psu, all are correct. I changed os to ethos sat up again, hashrates are same. still 2 cards gives 20mhs, 4 cards gives 25 mhs. I realized something, near 4 cards written name that GTX 1060 6GT, other 2 cards written name GTX 1060 6GT Rev. 2. what is differences between them, how can i fix it? Try to read this thread, this is well explained It is 99,99% because memory chips on card. Best hashrate gives samsung memory (up to 25MH/S), then micron (up to 23MH/S) and the worst is hynix (up to 19-20 MH/S). You can check memory brand using GPU-Z.
|
|
|
|
KDM724
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 26, 2018, 10:09:08 AM |
|
thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?
in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU).
|
|
|
|
gsanjin
Member
Offline
Activity: 191
Merit: 12
|
|
February 26, 2018, 04:48:47 PM |
|
thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?
in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). Core +140 Mem +540 PL 90%, Hynix 3GB, using DSTM 0.58 and getting rock solid average 314 sol/s
|
|
|
|
crairezx20
Legendary
Offline
Activity: 1638
Merit: 1046
|
|
February 26, 2018, 05:32:12 PM |
|
Guys are you experience to hit 74c temperature with 30c room temperature with stock settings and 100% fan? My card is MSI 1060 6gb armor OC edition but the temp is too high compare to my other cards like 1080ti super jetstream and 1070 dual oc.. I hope someone could give me a tip for OC settings with good hashrate for zcash or ethereum dual mining.. thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?
in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). I think better to try change the negative to positive i always experience the msi oc software hang or crashes. try to use the + in memory clock instead..
|
|
|
|
Patuba
Newbie
Offline
Activity: 63
Merit: 0
|
|
February 26, 2018, 07:25:05 PM |
|
Just curious, when you guys get your average SOLs, do you get it from your mining software or the mining pool site?
|
|
|
|
PowerRangerX
Newbie
Offline
Activity: 30
Merit: 0
|
|
February 27, 2018, 04:23:28 AM |
|
Guys are you experience to hit 74c temperature with 30c room temperature with stock settings and 100% fan? My card is MSI 1060 6gb armor OC edition but the temp is too high compare to my other cards like 1080ti super jetstream and 1070 dual oc.. I hope someone could give me a tip for OC settings with good hashrate for zcash or ethereum dual mining..
....
Yes I have same experience too My card Zotac 1060 3Gb temp hit 71C with stock setting, and compare to my EVGA 1070 SC juts hit 60C. I dont know whats wrong with 1060 why generate so much heat. Now after OC a little bit and set fan to 80% power limit 70% temp hit 62C
|
|
|
|
greyday
Member
Offline
Activity: 434
Merit: 52
|
|
February 27, 2018, 04:55:25 AM |
|
Just curious, when you guys get your average SOLs, do you get it from your mining software or the mining pool site?
Both. I use the software to tweak until I'm happy then compare to the pool stats 1-2 days later.
|
|
|
|
cryptodunno
Member
Offline
Activity: 308
Merit: 10
|
|
February 27, 2018, 06:09:31 AM |
|
guys, need some advice.. recently i switched few of my 1060s with Samsung memory to ETH+keccak and doing abt 170mh/s per claymore, but actual hashrate on ethermine is only around 140 mh/s. actual daily income around the same as WTM shows.
Should I worry abt it and try another pool?
|
|
|
|
greyday
Member
Offline
Activity: 434
Merit: 52
|
|
February 27, 2018, 07:03:42 AM |
|
guys, need some advice.. recently i switched few of my 1060s with Samsung memory to ETH+keccak and doing abt 170mh/s per claymore, but actual hashrate on ethermine is only around 140 mh/s. actual daily income around the same as WTM shows.
Should I worry abt it and try another pool?
Go by income, not site hashrate.
|
|
|
|
Quake4
Member
Offline
Activity: 825
Merit: 18
MindMiner developer
|
|
February 28, 2018, 06:13:38 AM |
|
thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?
in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). Core +140 Mem +540 PL 90%, Hynix 3GB, using DSTM 0.58 and getting rock solid average 314 sol/s Core +99 Mem -113 PL 91% 3Gb, Bminer 5.3.0 309 sol/s and no craches, but GPU 70 degrees fan 70% ~2700rpm
|
MindMiner - miner manager programm with autoswitch between Algos&Pools. This isnt a fork based on MultiPoolMiner (Nemos, SniffDog, Mega, NPlus & etc)
|
|
|
Quake4
Member
Offline
Activity: 825
Merit: 18
MindMiner developer
|
|
February 28, 2018, 06:26:15 AM |
|
When one or more cards hit 53-54 degrees, system is instable and I get "gpu clock are too low" Memory Clock : +775 (Micron memory)
IMHO, memory clock for micron very high. Try range 500 - 700. If its stable adjust core clock by +50 up to 250.
|
MindMiner - miner manager programm with autoswitch between Algos&Pools. This isnt a fork based on MultiPoolMiner (Nemos, SniffDog, Mega, NPlus & etc)
|
|
|
lotfiuser
|
|
February 28, 2018, 06:28:48 AM |
|
ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it
|
Free palestine
|
|
|
Quake4
Member
Offline
Activity: 825
Merit: 18
MindMiner developer
|
|
February 28, 2018, 06:42:09 AM |
|
what is differences between them, how can i fix it?
4 card have samsung memory with small latency and 2 new have hynix memory with large latency. Only change cards.
|
MindMiner - miner manager programm with autoswitch between Algos&Pools. This isnt a fork based on MultiPoolMiner (Nemos, SniffDog, Mega, NPlus & etc)
|
|
|
timikulit
|
|
February 28, 2018, 06:47:09 AM |
|
ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it
If ETH is already POS. What coin are you going to mine? is the profit somehow similar when mining ETH? I can sense that Its too late to enter mining altcoin specially when ETH goes POS. Theres nothing more profitable rather than ETH And the majority of the miners are on ETH. hmmm
|
|
|
|
ltcsprite
|
|
February 28, 2018, 07:19:29 AM |
|
ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it
If ETH is already POS. What coin are you going to mine? is the profit somehow similar when mining ETH? I can sense that Its too late to enter mining altcoin specially when ETH goes POS. Theres nothing more profitable rather than ETH And the majority of the miners are on ETH. hmmm Uhhhhhhhhhhhhhhhh. All kinda stupid here. Do you fuckers even read?
|
|
|
|
|