GTX 1060 discussion thread

[BennyT]

Has anyone tried the 385.28 drivers? Wondering if it's worth a shot

I'm using the 385.28 drivers now. I'm thinking about rolling back to the 384.9x? drivers because I have a GPU lagging now. I believe that's what's causing it. Wasn't lagging before the driver update

Thanks. I guess I'll stay on 384.94. It's been fairly good so far.

I love the 1060's. I'm drawing 800w per 8 card rig. This week I'm going to try and drop it to 775w and see if I can plug two rigs into one outlet. If the total wattage is under 1550w I think it should be fine for one receptacle.

[1714264949]

1714264949

[1714264949]

1714264949

[damNmad]

Has anyone tried the 385.28 drivers? Wondering if it's worth a shot

I'm using the 385.28 drivers now. I'm thinking about rolling back to the 384.9x? drivers because I have a GPU lagging now. I believe that's what's causing it. Wasn't lagging before the driver update

Thanks. I guess I'll stay on 384.94. It's been fairly good so far.

I love the 1060's. I'm drawing 800w per 8 card rig. This week I'm going to try and drop it to 775w and see if I can plug two rigs into one outlet. If the total wattage is under 1550w I think it should be fine for one receptacle.

What are the hash rates and temperatures you getting with 800W? what is the card's individual power limit?

[mineblue]

Has anyone tried the 385.28 drivers? Wondering if it's worth a shot

I'm using the 385.28 drivers now. I'm thinking about rolling back to the 384.9x? drivers because I have a GPU lagging now. I believe that's what's causing it. Wasn't lagging before the driver update

Thanks. I guess I'll stay on 384.94. It's been fairly good so far.

I love the 1060's. I'm drawing 800w per 8 card rig. This week I'm going to try and drop it to 775w and see if I can plug two rigs into one outlet. If the total wattage is under 1550w I think it should be fine for one receptacle.

I am wondering if my 1000w gold rating PSU can handle it.
I am thinking of adding more now but I hesitated because of these 3 Hynix cards that are currently drawing 100w mining zcash.

[heavyarms1912]

Two of my gtx 1060 does 23.8 MH/s @ -200 core and +750 on memory (both are samsung chips) and 65% power limiter.  That's the best I have found so far.

[HarmlessBlueberry]

i end up getting around 19MH/s standard clocking.
used to be be 21 but after abuse its at 19

[mensa84]

After update drivers, i have 24.1 MH/s

[AS10]

What is the hashrate difference of 3GB vs 6GB in ETH mining? ( consider both have Samsung memory )

[KORUN]

Help,

I put 2 x 1060 mining edition on a rig with 4 other 1060 gaming, they are both Gigabyte.
Before, the 4 regular were working great, now, after DDU and the newest driver (tried older too), this happens:


https://image.prntscr.com/image/MwIEIASMRgmVW22MafIPgA.png

Any suggestion?

[Undefined31415]

Help,

I put 2 x 1060 mining edition on a rig with 4 other 1060 gaming, they are both Gigabyte.
Before, the 4 regular were working great, now, after DDU and the newest driver (tried older too), this happens:




Any suggestion?

Have you looked at your BIOS settings? Do you have the PCIe link speed set to auto, gen 1, etc.? Try changing that.

[BennyT]

What are the hash rates and temperatures you getting with 800W? what is the card's individual power limit?

I get 20.8-20.1 dual mining eth and decred at 482-485. Temps are 58-62 at around 75% power.

[damNmad]

What are the hash rates and temperatures you getting with 800W? what is the card's individual power limit?

I get 20.8-20.1 dual mining eth and decred at 482-485. Temps are 58-62 at around 75% power.

What is the dcri you use for this settings?

I get same rates & same temperature too (fans run at 30-35) with 68% tdp on Ubuntu though!!

just my 2 cents...

[umine]

For my Palit GTX1060 SJS 3Gb I got about 280 Sol/s at 80W power consumption: +110 core, +650 mem, 65% PL (EWBF 0.3.4b, Win7x64)

[KORUN]

Help,

I put 2 x 1060 mining edition on a rig with 4 other 1060 gaming, they are both Gigabyte.
Before, the 4 regular were working great, now, after DDU and the newest driver (tried older too), this happens:


https://image.prntscr.com/image/MwIEIASMRgmVW22MafIPgA.png

Any suggestion?

Have you looked at your BIOS settings? Do you have the PCIe link speed set to auto, gen 1, etc.? Try changing that.

I managed to get them to work or at least appear as working (https://image.prntscr.com/image/1HzujqM2RhW39NFdZSLzjg.png)
but I can't change anything in Afterburner on the 1060 Mining Edition.

I get this https://i.redd.it/od2otzv29uuy.png

On Claymore, they get around 19-20 MH/s but I thing that is on stock, because I can't change anything.

Any suggestions?


UPDATE: Fixed it by using system restore and installing older drivers.

[mineblue]

Has anyone tried the 385.28 drivers? Wondering if it's worth a shot

I'm using the 385.28 drivers now. I'm thinking about rolling back to the 384.9x? drivers because I have a GPU lagging now. I believe that's what's causing it. Wasn't lagging before the driver update

Thanks. I guess I'll stay on 384.94. It's been fairly good so far.

I love the 1060's. I'm drawing 800w per 8 card rig. This week I'm going to try and drop it to 775w and see if I can plug two rigs into one outlet. If the total wattage is under 1550w I think it should be fine for one receptacle.

Somebody might not care since this is not much about 385.28 driver.
I tried installing 385.28 driver and the LED of my Palit GTX1060 LED were not turning ON after OS boot.
I thought the LEDs were broken.
But when I reverted the driver back, the LEDs are turning ON again.
This driver might still have some issues.

[HashashInnC]

i have  3 asus rog strix 1060 6gb , great card they keep always low temp ,never get more than 70°c at 22-23 mh/s(eth algo) ,mc +699 cc+129

[kaptenhafiz70]

MSI GTX 1060 6GB Armor - OC 100% TDP 23Mh/s eth only

[volkie1912]

1 zotac amp gtx 1060 6gb (samsung memory)----> 24mh/s 70pl -300 c.clock +750 m. clock 56 C auto fan
2 evga scc gtx 1060 6gb (micron memory)----> 24 mh/s 70pl -300 c.clock +750 mem. clock 55 C auto fan
1 gigabyte gtx 1060 wf oc 6gb (hynix memory)----> 70pl 19.23 mh/s +150 c.clock +600 mem. clock 61 C

all of them running with 2 zotac gtx 1070 mini with micron mem. for 10 days without issue, total hashrate 155mh/s

[digdugg67]

Gigabyte GeForce GTX 1060 3GB ~ 24.2 mh/s. Does anyone have GeForce GTX 1060 with 4 Gb? want to know hashrate

[Aruu]

Gigabyte GeForce GTX 1060 6GB @Samsung -> -100 C.Clock | +850 M.Clock | Powerlimit @70% 
-> 24.3 MH/S while Dualing Mining Sia @Dcri 15

Whole rig consumption @7GPU : 650w for 170MH~ETH | 850MH~Sia

[preda]

I have 21 1060 cards all 3gb all with Samsung memory


Well let me tell you something the best of the best are the
EVGA 1060 3gb they are incredible mine do 23.5mh + 20mh lbry dual mining the others cards can't do it

Just mining eth does 24.5/25mh

Core +100
Tdp 60%
+730 memory