[ANN] Firo (FIRO) - Implementing ZKP privacy without trusted setup

[nsummy]

Hey guys, i am new to Zcoin mining and have a question.

Whats the best/optimum overclock settings for gtx 1080?

I am mining with 6x 1080 with the following settings:
power limit: 90
core clock: +135
mem clock: -200

I am getting around 12.15mh/s, thats ~2025 kh/s per card. I read here ppl get ~2200 kh/s per card.

Thank you.

Hi, I have 6x1080 Gigabyte g1,14mh/s, the settings are:
power limit: 100
core clock: +130
mem clock: 0
Customize bat:ccminer-x64 -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u XXX.workername -p x --submit-stale -i 22

One question, why use the ccmine-x64 one instead of the ccminer.exe one?

Some mining tool upgrade, need a new tool to get faster speed. Is only a matter of the representation of program, you can modify this said, as long as you can set the corresponding program in the 'bat' file.

Thx for your reply,I am using the ccminr.exe file at this location:
https://github.com/djm34/ccminer-msvc2015/releases/

Also which executable is faster for nvidia cards? the ccminer_cuda9.exe or the ccminer.exe file?

Can you give me the location where you are using yours instead?
Which one is newer / better / faster?

Cuda 9 version will be the fastest

[1715158206]

1715158206

[1715158206]

1715158206

[1715158206]

1715158206

[1715158206]

1715158206

[spreewel]

Because in miningpoolhub nobody answer and support is awful, I have this configuration in my 2 x 1080

ccminer -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u sprint.miner130 -p 1

It returns me constantly stratum error, is there something specific that I have to do so I can start mining there, with suprnova I have problems....

[chrondosia91989]

For those having issues with mining at others pools...

cryptopool.xyz has added XZC

ccminer-x64-75 -a lyra2z -o stratum+tcp://cryptopool.xyz:4553 -u yourwalletaddress-p c=XZC

0% fee, hourly payouts after confirmed block, dedicated discord support channel, YIIMP based pool

Come hash with me!

[PlanetCrypto]

Ccminer_cuda9 then combined with the latest driver, or nvidia 387 driver, can also be used to run normally.

[tomsmith26]

Zcoin on the run. 10 Days ago was at $13 and today $33. I can see a support on $20, is this because the new Znode’ Masternode System and New Reward Model??, I want to buy some more but I'm going to wait for a retrace, I think this could moon in 2018!

I agree, ~$20 is reasonable to me. Good coin with a promising future.

Agree - way overpriced right now. Nowhere near a top 50 coin at the moment...barely have a working wallet (have had many serious fixes pushed out in the last month or two). It's a risky investment at this price, with the history of the coin. If they get their znodes out successfully (a bigger challenge than people understand), and a legitimate wallet to represent the protocol, maybe $50-$70 range, for legitimate market cap...but that's some big IFs. Lots of hype around master nodes (not released) and rewards at the moment. It's not going up much from here, and probably down....better off waiting to see if they successfully release some things before jumping in, as they are already priced in without being delivered.

MTP was to have come out in the summer...more delays, still months away.  Lots of premature hype.

From $13 to $40 in 2 weeks, now a top 50 market cap, on announcement of master nodes coming (after months of speculation), and winning a coin of the month vote to get on Binance exchange?

That said, in a few months, if they deliver, they could be one of the (if not the) best privacy coins available .... assuming Bitcoin's CT work underway (Confidential Transactions) doesn't wipe out all privacy coins.

Do you guys still think it will go back to 20$? It's above 40$ mostly and I don't think it will drop so much except if the whole market crashes.

Maybe. it can and you can wait for this price . I will spend 1 bitcoin to get some zcoins and hold it for a while .
I think Zcoin is on the correction way and I will not miss this chance to collect some cheap coins .
Next stage it will hit 100$  and I can get a big profit from this investment .

[Hosam Mazawi]

interesting

[onetwostep]

interesting

Welcome to this forum. Your first message is interesting too
Why you write this shit? or why you registered this forum?

[leojoyms]

in Suprnova for Ryzen 1700 is best port 1599 (very, very slow CPU's) or 1598 (low diff)

[nsummy]

Because in miningpoolhub nobody answer and support is awful, I have this configuration in my 2 x 1080

ccminer -a lyra2z -o stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581 -u sprint.miner130 -p 1

It returns me constantly stratum error, is there something specific that I have to do so I can start mining there, with suprnova I have problems....

what does the error say?

[Larmen]

Hey guys, i have a problem. I have two rigs with 6x1080ti and on first rig all cards do 3,25 Mh/s but on second they do only 3,05 - 3,1 Mh/s. Where can be be a problem? Official windows 10, 4 GB ram. Using miner by djim34. Intensity 20

[abudfv2008]

Normal hashrates.
1080

1080ti

[Larmen]

Normal hashrates.
1080
https://image.ibb.co/g1tDfG/1234.jpg
1080ti
https://image.ibb.co/g02H7w/123.png

Miner? Overclock?

[Frank White]

Is that #1 miner on MiningPoolHub a botnet, farm, or NiceHash? The hash rate has progressively gone up so it seems like it's a botnet (computers go on and off so it fluctuates the hash rate) ... or it's nicehash... If it's a "farm" how to u explain the hash rate going up by 1mil hash  in a span of a few hours?

[b4h4mu7]

Hello Zcoin!

I'm thrilled to announce our research efforts into the hardened version of MTP, Itsuku, have been published to the International Association for Cryptologic Research (IACR)! We'll be releasing a C++ implementation of the design in our upcoming Boolberry hardfork when we rebrand to Doubloon. If your team plans on using the new design maybe we can organize a GPU mining contest as it would benefit both projects. If not, no worries we've given you guys credit in our project reveal announcement and also in the published paper.

"Itsuku: a Memory-Hardened Proof-of-Work Scheme"
https://eprint.iacr.org/2017/1168

https://bitcointalk.org/index.php?topic=577267.msg25519288#msg25519288

Thanks for organizing the bounty program. It was a pleasure seeing researchers from all sides collaborate towards a mutually beneficial outcome.

Cheers!

[plopzz]

Ok so ZNodes are only for owners of 1000 XZC.

Why not for early adopters ?

Mining are useless with the new share plan.

[cyberspacemonkey]

Ok so ZNodes are only for owners of 1000 XZC.

Why not for early adopters ?

Mining are useless with the new share plan.

1000 XZC is a lot, but I guess that it was set that way to attract big investors. Early adopters had the chance to mine the hell out of it when the coin started, it's not early development any longer for Zcoin it's actually very popular right now.

[amin_eshgh]

Hi guys I'm new to zcoin
1) How I can earn more money from it ?
And there is 3 basic question ?
2) What are masters node and their profit ?
3) Should I wait for price correction ?
4) what is the profit of minig with a GPU gtx 1070 ?

[S_Natural]

Hi guys I'm new to zcoin
1) How I can earn more money from it ?
And there is 3 basic question ?
2) What are masters node and their profit ?
3) Should I wait for price correction ?
4) what is the profit of minig with a GPU gtx 1070 ?

You asked very good questions man

1. No one can answer this question but you. You can mine and keep them, buy and trade...
2. Masternodes are running the same wallet software on the same blockchain to provide service to the network. Masternodes get portion of reward for each block. Masternode's profit depends on coins and number of masternodes on the network.
3. You have answered your question. Like BTC's price from 0.1 to 11000 USD, if we would know, we will be a millionaire.
4. With current diff, 1070 can make 3 - 3.5 USD/ day after electric cost.

[endlessskill]

When Znodes release?

[rowenta01]

When Znodes release?

The Znodes are scheduled for the next weekend!