[ANN] Firo (FIRO) - Implementing ZKP privacy without trusted setup

[biggee]

Hey guys,

Is there anybody out there that has managed to get sgminer working on XZC with AMD RX* cards?

The latest djm34 release complains about missing dll files then crashes.

The previous version looks like it's all going to work then crashes and closes down.

I can't even get the supplied test.bat to run.

Win 10 / Latest AMD drivers (blockchain release) / 6 x RX480 / 470 mixed

Any suggestions or is this a lost cause with AMD cards?

[1715258227]

1715258227

[1715258227]

1715258227

[CjMapope]

Hey guys,  how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  

it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue.  (BTC itself has i believe 50 confirms on fresh mined coins )
Today it took a LOONG time to confirm coins, but how she goes :/
I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm

[timnguyen]

Hey guys,  how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  

it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue.  (BTC itself has i believe 50 confirms on fresh mined coins )
Today it took a LOONG time to confirm coins, but how she goes :/
I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm

Can you tell which one is better? miningpoolhub for suprnova?

[majonezas]

Global hashrate has increased nearly twice over the last few days, ~ 50,000 Mh/s now, from 30,000 few days back

tried mining this with 2x1070 + 2x1080 nvidia cards and xeon cpu, and its way more profitable than anything on whattomine charts, very low power consumption compared to equihash, very low temps: 30-40C with fans set at 45-55%, and somehow very low gpu usage only 33-46% no matter where the power limit is set at. 100% or 60% it's the same

[doktor83]

Hey guys,

Is there anybody out there that has managed to get sgminer working on XZC with AMD RX* cards?

The latest djm34 release complains about missing dll files then crashes.

The previous version looks like it's all going to work then crashes and closes down.

I can't even get the supplied test.bat to run.

Win 10 / Latest AMD drivers (blockchain release) / 6 x RX480 / 470 mixed

Any suggestions or is this a lost cause with AMD cards?

it's not worth mining it with amd, like on 1060 i get about 1000khs, with a modded 470 max 500khs.

[cyberspacemonkey]

Global hashrate has increased nearly twice over the last few days, ~ 50,000 Mh/s now, from 30,000 few days back

tried mining this with 2x1070 + 2x1080 nvidia cards and xeon cpu, and its way more profitable than anything on whattomine charts, very low power consumption compared to equihash, very low temps: 30-40C with fans set at 45-55%, and somehow very low gpu usage only 33-46% no matter where the power limit is set at. 100% or 60% it's the same

Do you mine sharing what miner are you using? I have an AMD but the hashrate from my CPU is twice as much as I get with the GPU which is an R9 280x so I'm using it to mine ETH instead but it may have to do with the miner.

[majonezas]

its ccminer for nvidia by djm34, got it from the link on zcoin.io website https://zcoin.io/guide-on-how-to-mine-zcoin-xzc/

[timnguyen]

Hey guys,  how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  

it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue.  (BTC itself has i believe 50 confirms on fresh mined coins )
Today it took a LOONG time to confirm coins, but how she goes :/
I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm

oh alright thanks, i thought something was wrong with my setup.


What is the avg 1080ti can get? im getting about 2800 but mph reports only 1.6 or something

Same here I got 6000 but the pool only report 4000. been running for 2 days

[majonezas]

Hey guys,  how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  

it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue.  (BTC itself has i believe 50 confirms on fresh mined coins )
Today it took a LOONG time to confirm coins, but how she goes :/
I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm

oh alright thanks, i thought something was wrong with my setup.


What is the avg 1080ti can get? im getting about 2800 but mph reports only 1.6 or something

Same here I got 6000 but the pool only report 4000. been running for 2 days

check whattomine.com and if your daily reward is something like 0.89 xzc (which it should be with 6000Mhs) or a little less then you shouldnt worry

[gurumeditation]

Hey guys,  how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  

it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue.  (BTC itself has i believe 50 confirms on fresh mined coins )
Today it took a LOONG time to confirm coins, but how she goes :/
I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm

oh alright thanks, i thought something was wrong with my setup.


What is the avg 1080ti can get? im getting about 2800 but mph reports only 1.6 or something

Same here I got 6000 but the pool only report 4000. been running for 2 days

check whattomine.com and if your daily reward is something like 0.89 xzc (which it should be with 6000Mhs) or a little less then you shouldnt worry

Have the same problem here. According to WTM, your post, and my hashrate (7500Kh/s), I should get around 1 xzc/day
On the pool side it shows 4400 Kh/s at best, and most of the time 3500-4000 kh/s. Got only 0.6 xzc in the past 24 hours (which is accurate regarding WTM calculation for that hashrate).
I know WTM calculation is often overestimated, but eh, -40% is huge.
Using ccminer 2.2 x64. Dunno if it's on miner or pool side, but clearly there is something wrong

[M82]

Hey guys,  how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  

it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue.  (BTC itself has i believe 50 confirms on fresh mined coins )
Today it took a LOONG time to confirm coins, but how she goes :/
I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm

oh alright thanks, i thought something was wrong with my setup.


What is the avg 1080ti can get? im getting about 2800 but mph reports only 1.6 or something

Same here I got 6000 but the pool only report 4000. been running for 2 days

check whattomine.com and if your daily reward is something like 0.89 xzc (which it should be with 6000Mhs) or a little less then you shouldnt worry

Have the same problem here. According to WTM, your post, and my hashrate (7500Kh/s), I should get around 1 xzc/day
On the pool side it shows 4400 Kh/s at best, and most of the time 3500-4000 kh/s. Got only 0.6 xzc in the past 24 hours (which is accurate regarding WTM calculation for that hashrate).
I know WTM calculation is often overestimated, but eh, -40% is huge.
Using ccminer 2.2 x64. Dunno if it's on miner or pool side, but clearly there is something wrong

This pool steal shares.. i mine on xzc.suprnova.cc and payments are fine.
2 days mining on minerpool 1,1 xzc , 12 hours mining on suprnova 0,77 xzc lol

[elsystem]

Where can I find an all-time chart of ZCoin's network hashrate and difficulty?

[gurumeditation]

Where can I find an all-time chart of ZCoin's network hashrate and difficulty?

https://bitinfocharts.com/zerocoin/

[elsystem]

Where can I find an all-time chart of ZCoin's network hashrate and difficulty?

https://bitinfocharts.com/zerocoin/

Thanks gurumeditation, but this is a price chart, not a network hashrate/difficulty chart.

Does anyone have a link to an all-time chart of ZCoin's network hashrate and difficulty? I suggest this is added to the website. It's quite important to miners and potential network supporters. The only thing I've come across are current network stats.

[k0a1l0]

Hey everyone. Where can I see the results of miner bounty challenge? Are there working miners for AMD/nVidia for new algo (MTP) on testnet? Curious to check it out

[krazyx]

HI, could anyone tell me the minimum xzc necessary for creating a znode (masternode)? Also, what is the purpose of this special nodes on this coin? Thanks

Zcoin Dev Update 19 September 2017: Znodes, GUI, libzerocoin, MTP and ZEth



Znodes
At the same time, work will begin on Znodes, the long awaited update that allows incentivized nodes to support the Zcoin network and makes Zcoin into a hybrid Proof of Work and Proof of Stake system. Znode owners will earn a proportion of the block rewards as an incentive to maintain a full node, keep it updated and maintain the network. A certain number of Zcoin will be required as a ‘collateral’ to start a Znode to discourage Sybil attacks. This number will be announced as we come closer to launch but we aim to achieve a balance between allowing people to participate while maintaining a decent profitability for node owners to keep them sufficiently incentivized.

No numbers announced yet, maybe there is some rumors on the slack but i did not hear any numbers for now...

[gurumeditation]

Where can I find an all-time chart of ZCoin's network hashrate and difficulty?

https://bitinfocharts.com/zerocoin/

Thanks gurumeditation, but this is a price chart, not a network hashrate/difficulty chart.

Does anyone have a link to an all-time chart of ZCoin's network hashrate and difficulty? I suggest this is added to the website. It's quite important to miners and potential network supporters. The only thing I've come across are current network stats.

Duh ! sorry :
https://chainz.cryptoid.info/xzc/#@diff

[webtimmi]

Where can I find an all-time chart of ZCoin's network hashrate and difficulty?

https://bitinfocharts.com/zerocoin/

Thanks gurumeditation, but this is a price chart, not a network hashrate/difficulty chart.

Does anyone have a link to an all-time chart of ZCoin's network hashrate and difficulty? I suggest this is added to the website. It's quite important to miners and potential network supporters. The only thing I've come across are current network stats.

Duh ! sorry :
https://chainz.cryptoid.info/xzc/#@diff

Hi guys. question - sent from my wallet a few coins to the  exchange (bittrex), but there is no confirmation in the wallet, the coins did not come to the  exchange. How long does it take to receive a confirmation from the network?

[jkirby19]

Is zcoin better than other privacy cryptos like Dash, Monero and Zcash and why and why not?

[CjMapope]

hahha thats a funny thing to say about mining, its called VARIANCE
you can use all the calculators you want till your blue in the face, they honestly DONT MEAN SHIT   a pool could hit 100 blocks a day, or ZERO ;p
ALL you can do is trust the pool operators and do the math of shares yourself AFTER you hit the blocks

"clearly something wrong" because you earned less than a calculator says.... LOL!~

EDIT: a 1080 does 2mh/s, some of mine are on zcoin right now