Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Lafu]

Haha Lol some Brand new Newbie has created a Copy of the OP with other Link  dont use it i think its scam virus thing  !  Admin has deleted now Tace Care all

[Claymore]

v11.0:

- improved speed for Hawaii, Fury, Tahiti and Pitcairn cards. About 355H/s on stock 390X, 370H/s on stock Nano, 250H/s on stock 280X.
- added faster assembler implementation kernels for these cards.
- added "-asm" option.

NOTE: we are on assembler level now, it has best speed but bad compatibility. If it fails for you, make sure you use recommended drivers, or use "-asm 0" option.
Now I will check what I can do for Polaris cards.
Linux version will be available later.

[IOTUSA]

v11.0:

- improved speed for Hawaii, Fury, Tahiti and Pitcairn cards. About 355H/s on stock 390X, 370H/s on stock Nano, 250H/s on stock 280X.
- added faster assembler implementation kernels for these cards.
- added "-asm" option.

Now I will check what I can do for Polaris cards.
Linux version will be available later.

I sure wish you could work some magic on 280/380 cards as well. Sad to see them so far behind the pack
Also: What's the power consumption bump with these updates?

[Mrjangoss]

I have two rx 480 of 8 and 4 gb I have to lower the memory clock to 1750 to the one of 8 gb because if I leave it in 2000 it freezes the pc, I have not been able to get the best yielding to the one of 8 gb that can be the problem ? My hardware is corsair 650 atx, 12 gb ram amd fx 6300 msi 970 mobo , win 10 pro crimson 16.12.1 my has 250 h/s 8gb 254h/s 4gb, I hope your help many thanks and good night.

Any help please Change to the crimson version 16.11.3 and the problem persists.

[Moondreams]

Claymore's ZCash AMD GPU Miner.
=========================

Latest version v11.0:

- improved speed for Hawaii, Fury, Tahiti and Pitcairn cards. About 355H/s on stock 390X, 370H/s on stock Nano, 250H/s on stock 280X.
- added faster assembler implementation kernels for these cards.
- added "-asm" option.

Claymore..you are first class!!!

[fredeq]

What is typical top coins Fury performance?
I can see some for 370USD in my local shop.

Wattage is probably through the roof?

[hhdllhflower]

claymore 
  miner displays algorithm ASM but can't get any speed.
  what's the best -a option for feiji core ,please

06:55:31:321   43a0   OpenCL platform: AMD Accelerated Parallel Processing
06:55:31:415   43a0   OpenCL initializing...

06:55:31:421   43a0   AMD Cards available: 3
06:55:31:427   43a0   GPU #0: Hawaii, 4096 MB available, 40 compute units
06:55:31:432   43a0   GPU #0 recognized as Radeon 290
06:55:31:438   43a0   GPU #1: Fiji, 4096 MB available, 64 compute units
06:55:31:443   43a0   GPU #1 recognized as Fury X/Nano
06:55:31:449   43a0   GPU #2: Fiji, 4096 MB available, 64 compute units
06:55:31:454   43a0   GPU #2 recognized as Fury X/Nano
06:55:31:460   43a0   POOL version
06:55:31:465   43a0   b357
06:55:31:471   43a0   Platform: Windows
06:55:31:761   43a0   start building OpenCL program for GPU 0...
06:55:31:771   43a0   done
06:55:31:979   43a0   start building OpenCL program for GPU 1...
06:55:31:988   43a0   done
06:55:32:195   43a0   start building OpenCL program for GPU 2...
06:55:32:205   43a0   done
06:55:32:688   43a0   GPU #0 algorithm ASM, intensity 8
06:55:33:024   43a0   GPU #1 algorithm ASM, intensity 8
06:55:33:363   43a0   GPU #2 algorithm ASM, intensity 8
06:55:33:369   43a0   Total cards: 3
06:55:46:175   43a0   Watchdog enabled
06:55:46:181   43a0   Remote management (READ-ONLY MODE) is enabled on port 3333
06:55:46:187   43a0   

06:55:46:192   43a0   
BENCHMARK MODE!

06:55:48:225   428   recv: 51
06:55:48:231   428   srv pck: 50
06:55:48:260   428   srv bs: 0
06:55:48:266   428   sent: 139
06:55:49:219   43a0   ZEC - Total Speed: 240.406 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
06:55:49:225   43a0   ZEC: GPU0 242.526 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s
06:55:52:251   43a0   ZEC - Total Speed: 253.753 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
06:55:52:257   43a0   ZEC: GPU0 253.753 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s
06:55:52:729   1498   recv: 51
06:55:52:730   1498   srv pck: 50
06:55:52:748   1498   srv bs: 0
06:55:52:749   1498   sent: 139
06:55:55:284   43a0   ZEC - Total Speed: 261.199 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
06:55:55:285   43a0   ZEC: GPU0 261.199 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s
06:55:57:727   272c   recv: 51
06:55:57:728   272c   srv pck: 50
06:55:57:750   272c   srv bs: 0
06:55:57:751   272c   sent: 139
06:55:58:305   43a0   ZEC - Total Speed: 256.453 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
06:55:58:306   43a0   ZEC: GPU0 256.453 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s
06:56:01:327   43a0   ZEC - Total Speed: 259.078 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
06:56:01:328   43a0   ZEC: GPU0 259.078 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s
06:56:01:779   b44   
06:56:01:780   b44   GPU #0: Hawaii
06:56:01:781   b44   GPU #1: Fiji
06:56:01:782   b44   GPU #2: Fiji
06:56:01:783   b44   ZEC - Total Speed: 259.947 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
06:56:01:783   b44   ZEC: GPU0 259.947 H/s, GPU1 0.000 H/s, GPU2 0.000 H/s
06:56:01:806   b44   GPU0 t=57C fan=79%, GPU1 t=34C fan=56%, GPU2 t=44C fan=63%
06:56:01:807   b44   

[mamboOo]

Almost same speed as v10

[zzzzzzzzzz]

Wow! That's it for v11? Those new numbers still aren't even close to Optiminer v1.3. I'm getting over 400 Sols/s on my Nanos, stock clocks, with optiminer - after the devfee.

[fr4nkthetank]

yeah fury doesnt work properly.  Can only do algo 1, and no asm, which results in slower speeds than v10.  any other options gets 0 h/s

[omshree]

Same with nanos

[Claymore]

As I said before, assembler has good speed but very bad compatibility. If you use 15.12 drivers and it does not work for you - please report, I will check these issues.
If you don't want to install 15.12 drivers - use "-asm 0" option. In next update I will add version check and display warning or set "-asm 0" automatically for incompatible drivers.

[roony]

Still a long way to run, but not bad...
Now we need performance on polaris and 390x 

[fr4nkthetank]

280x - about 12.5 % better speeds
390 - about 4%

[jstefanop]

Wow! That's it for v11? Those new numbers still aren't even close to Optiminer v1.3. I'm getting over 400 Sols/s on my Nanos, stock clocks, with optiminer - after the devfee.

Seems like Tahiti is the new king card...getting 280h/s on mine with moded bios (and clock under 1ghz...could prob get over 300 if I really pushed them). Not bad for a 5 year old $90 card

[Claymore]

yeah fury doesnt work properly.  Can only do algo 1, and no asm, which results in slower speeds than v10.  any other options gets 0 h/s

Use "-asm 0", miner will select "-a 3" automatically. What drivers version do you use?

[Holyblood89]

the same rate 290(290x)

[texv]

For RX 4x0 V10.0 is better

[cracker666]

think ill stay with optiminer at the moment geting 200h/s with my r9 380 and its stable so if claymore can match or better it ill start using claymore again its stable with overclock at gpu 1090 mem 1585 using watman and latest amd drivers not worried about power as free

[fr4nkthetank]

ok clay, tried that, works.  I have 16.11.4.  guess its the drivers, I wont downgrade the drivers, maybe someone else can try, my only fury is on my main gaming computer.  rest of the cards work fine other than this fury.  works but speed = 360 vs 390 v10