Pericle13
Newbie
Offline
Activity: 29
Merit: 1
|
|
September 27, 2017, 09:27:57 PM |
|
anyone got luck with rx 550 mining on this.
here is what i have in my bat file GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool ssl://us-east.equihash-hub.miningpoolhub.com:20570 -zwal skyline88908.new2 -zpsw x
it just closes any help would be awesome
try this: set GPU_FORCE_64BIT_PTR=1 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100 and make sure that zecminer64.exe is in the miner folder.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
September 28, 2017, 12:07:18 AM |
|
Hello guyz,
Can i dual mine zcash and zencash? GTX 1070
They use the SAME algorithm, that stresses the SAME parts of the card. The point to Dual Mining is one algo will be MEMORY heavy (ETH) the other will be CORE heavy thus allowing more full usage of the ENTIRE card.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Haidong Liang
Newbie
Offline
Activity: 65
Merit: 0
|
|
September 28, 2017, 07:40:04 AM |
|
Hello guyz,
Can i dual mine zcash and zencash? GTX 1070
They use the SAME algorithm, that stresses the SAME parts of the card. The point to Dual Mining is one algo will be MEMORY heavy (ETH) the other will be CORE heavy thus allowing more full usage of the ENTIRE card. That is right. The bottle neck of the ZEC mining is both the core and memory.
|
|
|
|
dejan2010
Newbie
Offline
Activity: 242
Merit: 0
|
|
September 28, 2017, 10:58:37 AM |
|
I need help guys .. how much hashrate does hd 7870 2gb gives when using this claymore miner ver. 12.6 ?
thanks in advance.
160 h/s I get 170-175 h/s with sapphire hd 7870 2GB
|
|
|
|
SIRacer09
Newbie
Offline
Activity: 55
Merit: 0
|
|
September 29, 2017, 12:48:34 PM |
|
What kind of hashrate are people getting out of the Sapphire RX 580 Nitro+ 4GB and 8GB? Anyone have a good bios? I can't seem to get more than about 285. Thought they would be more than that.
|
|
|
|
Ocatin
Newbie
Offline
Activity: 16
Merit: 0
|
|
September 29, 2017, 05:07:37 PM |
|
What kind of hashrate are people getting out of the Sapphire RX 580 Nitro+ 4GB and 8GB? Anyone have a good bios? I can't seem to get more than about 285. Thought they would be more than that.
For the RX 580, it should be around 300H/s. You are not far off.
|
|
|
|
UnknownX
|
|
September 29, 2017, 06:00:08 PM |
|
Hello guyz,
Can i dual mine zcash and zencash? GTX 1070
no, ZEC and ZEN are both equilhash algo coins, so you can't mine it in dual mode. And even if you start 2 miners to mine both coins your hashrate will be divide aprox. 50/50.
|
|
|
|
fapar
Sr. Member
Offline
Activity: 1414
Merit: 267
Undeads.com - P2E Runner Game
|
|
September 30, 2017, 05:23:29 AM |
|
I need help guys .. how much hashrate does hd 7870 2gb gives when using this claymore miner ver. 12.6 ?
thanks in advance.
160 h/s I get 170-175 h/s with sapphire hd 7870 2GB Asus 270X 2Gb 178-180 h/s (1050/1400 Mhz) What kind of hashrate are people getting out of the Sapphire RX 580 Nitro+ 4GB and 8GB? Anyone have a good bios? I can't seem to get more than about 285. Thought they would be more than that.
Asus STRIX RX480 8Gb 313-320 h/s (1310/2000 Mhz)
|
|
|
|
jojo69
Legendary
Offline
Activity: 3220
Merit: 4387
diamond-handed zealot
|
|
September 30, 2017, 05:50:24 PM |
|
My apologies if this is an old or common question...741 pages in this thread man
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal ...etc
I just get a red list of "unknown options"
now, I game also so I am running newer drivers, 16.6 to be precise, will this really not work? or have I missed something?
|
This is not some pseudoeconomic post-modern Libertarian cult, it's an un-led, crowd-sourced mega startup organized around mutual self-interest where problems, whether of the theoretical or purely practical variety, are treated as temporary and, ultimately, solvable. Censorship of e-gold was easy. Censorship of Bitcoin will be… entertaining.
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
September 30, 2017, 08:23:14 PM |
|
that is right. I started using nVidia cards as well.
The 1080Ti is good for ZCash. It is not good for ETH related mining. GTX 1080ti is a good card on a hash/watt basis for ETH, but it is not good on a hash/$ basis. Prior to the release of the Vega line, the 1080ti was the highest hashrate card you could mine ETH on with only a single GPU on it - and it's almost a match for the Vega64 on hashrate at MUCH lower power usage and similar cost. 1080ti is definitely better off on ZEC ZEN and related coins though, among other options.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
UnknownX
|
|
September 30, 2017, 08:42:57 PM |
|
My apologies if this is an old or common question...741 pages in this thread man
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal ...etc
I just get a red list of "unknown options"
now, I game also so I am running newer drivers, 16.6 to be precise, will this really not work? or have I missed something?
Try next one: set GPU_FORCE_64BIT_PTR=0 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100
|
|
|
|
mistercoin
Legendary
Offline
Activity: 1044
Merit: 1000
https://r.honeygain.me/XEDDM2B07C
|
|
September 30, 2017, 09:23:54 PM |
|
anyone got luck with rx 550 mining on this.
here is what i have in my bat file GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool ssl://us-east.equihash-hub.miningpoolhub.com:20570 -zwal skyline88908.new2 -zpsw x
it just closes any help would be awesome
In your batch file you need to change the first bit to: setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool ssl://us-east.equihash-hub.miningpoolhub.com:20570 -zwal skyline88908.new2 -zpsw x without the 'setx' the batch file tries to run GPU_FORCE.... as the starting command. Cheers, --Mistercoin
|
|
|
|
Kumic
|
|
September 30, 2017, 09:40:55 PM |
|
How much speed could I get with 1070 Gainward Phoenix with the latest miner? Power consumption?
|
|
|
|
jojo69
Legendary
Offline
Activity: 3220
Merit: 4387
diamond-handed zealot
|
|
September 30, 2017, 10:24:06 PM |
|
My apologies if this is an old or common question...741 pages in this thread man
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal ...etc
I just get a red list of "unknown options"
now, I game also so I am running newer drivers, 16.6 to be precise, will this really not work? or have I missed something?
Try next one: set GPU_FORCE_64BIT_PTR=0 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100 Thanks for the reply, but no luck. I tried adding both set and setx, all it does is double the number of unknown options eg. UNKNOWN OPTION setx UNKNOWN OPTION GPU_FORCE_64BIT_PTR=0 etc any other ideas?
|
This is not some pseudoeconomic post-modern Libertarian cult, it's an un-led, crowd-sourced mega startup organized around mutual self-interest where problems, whether of the theoretical or purely practical variety, are treated as temporary and, ultimately, solvable. Censorship of e-gold was easy. Censorship of Bitcoin will be… entertaining.
|
|
|
UnknownX
|
|
September 30, 2017, 10:48:26 PM |
|
My apologies if this is an old or common question...741 pages in this thread man
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal ...etc
I just get a red list of "unknown options"
now, I game also so I am running newer drivers, 16.6 to be precise, will this really not work? or have I missed something?
Try next one: set GPU_FORCE_64BIT_PTR=0 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1 set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100 Thanks for the reply, but no luck. I tried adding both set and setx, all it does is double the number of unknown options eg. UNKNOWN OPTION setx UNKNOWN OPTION GPU_FORCE_64BIT_PTR=0 etc any other ideas? did you tried reinstall drivers or to try older one? Does mining starts without environment variables? It should work without it.
|
|
|
|
jojo69
Legendary
Offline
Activity: 3220
Merit: 4387
diamond-handed zealot
|
|
September 30, 2017, 10:58:18 PM |
|
did you tried reinstall drivers or to try older one?
Does mining starts without environment variables? It should work without it.
no, I was really hoping to NOT have to roll my drivers back, like, 6 versions, in fact I don't think I will, just not worth it and, no, it says no pool specified
|
This is not some pseudoeconomic post-modern Libertarian cult, it's an un-led, crowd-sourced mega startup organized around mutual self-interest where problems, whether of the theoretical or purely practical variety, are treated as temporary and, ultimately, solvable. Censorship of e-gold was easy. Censorship of Bitcoin will be… entertaining.
|
|
|
crypto.bin101
Newbie
Offline
Activity: 37
Merit: 0
|
|
October 01, 2017, 09:48:46 AM |
|
From zcash flypool it says Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.
What address then we enter in claymore?
|
|
|
|
questen
Newbie
Offline
Activity: 45
Merit: 0
|
|
October 01, 2017, 10:55:23 AM |
|
can support Fiji cards, for driver 17.1.1 ?
|
|
|
|
UnknownX
|
|
October 01, 2017, 01:12:40 PM |
|
From zcash flypool it says Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.
What address then we enter in claymore? you should use t addresses. Announce about z addresses made some where in OCT or NOV 2016, so it's truly shouldn't care you. Nowadays all are using t addresses of ZEC.
|
|
|
|
Estimated
Newbie
Offline
Activity: 44
Merit: 0
|
|
October 01, 2017, 03:38:11 PM |
|
From zcash flypool it says Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.
What address then we enter in claymore? you should use t addresses. Announce about z addresses made some where in OCT or NOV 2016, so it's truly shouldn't care you. Nowadays all are using t addresses of ZEC. I use t address and pay directly into altcoin exchange without problem.
|
|
|
|
|