moreplavec
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 20, 2017, 08:47:19 PM |
|
Im trying to mine with Radeon HD-7770 1GB, but everytime i try to run GPU mining i end up with this:
����������������������������������������������������������������ͻ � Claymore's ZCash AMD GPU Miner v12.0 Beta � ����������������������������������������������������������������ͼ
ZEC: 1 pool is specified Main ZCash pool is zec.pool.minergate.com:3357
Catalyst 15.12 is REQUIRED for best performance and compatibility 15.12 does not support some Fiji cards, use 16.3.2 for them For 4xx cards (Polaris) Crimson 16.12.2 is recommended
At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools NOTE: miner uses 3000 rounds to calculate average speed, so it may take about a minute to get correct speed. OpenCL initializing... AMD Cards available: 1 GPU #0: Capeverde, 638 MB available, 5 compute units POOL version GPU #0 is going to use too high intensity (2), not enough memory, intensity value reduced (0) GPU #0 algorithm 1, intensity 0 Total cards: 1 AMD ADL library not found. OpenCL error 0 #101 - -61 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ZEC: Stratum - connecting to 'zec.pool.minergate.com' <176.9.122.21> port 3357 ZEC: Stratum - Connected (zec.pool.minergate.com:3357) (unsecure) ZEC: Authorized Pool sets new share target: 0x0083126e (diff: 500H) GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36
Any tip whats wrong? I set variables in ./start.bash as described in the first post, still not working. Im running Ubuntu 16 lts. Thanks!
|
|
|
|
grimjaw99
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 21, 2017, 09:57:33 PM |
|
Im trying to mine with Radeon HD-7770 1GB, but everytime i try to run GPU mining i end up with this:
����������������������������������������������������������������ͻ � Claymore's ZCash AMD GPU Miner v12.0 Beta � ����������������������������������������������������������������ͼ
ZEC: 1 pool is specified Main ZCash pool is zec.pool.minergate.com:3357
Catalyst 15.12 is REQUIRED for best performance and compatibility 15.12 does not support some Fiji cards, use 16.3.2 for them For 4xx cards (Polaris) Crimson 16.12.2 is recommended
At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools NOTE: miner uses 3000 rounds to calculate average speed, so it may take about a minute to get correct speed. OpenCL initializing... AMD Cards available: 1 GPU #0: Capeverde, 638 MB available, 5 compute units POOL version GPU #0 is going to use too high intensity (2), not enough memory, intensity value reduced (0) GPU #0 algorithm 1, intensity 0 Total cards: 1 AMD ADL library not found. OpenCL error 0 #101 - -61 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ZEC: Stratum - connecting to 'zec.pool.minergate.com' <176.9.122.21> port 3357 ZEC: Stratum - Connected (zec.pool.minergate.com:3357) (unsecure) ZEC: Authorized Pool sets new share target: 0x0083126e (diff: 500H) GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36
Any tip whats wrong? I set variables in ./start.bash as described in the first post, still not working. Im running Ubuntu 16 lts. Thanks!
Probably lack of memory with your video card.. It needs at least 2 GB of ram I think. Also your card is soooooo weak, it's pointless to even mine with it. You would be losing money to mine with that card. Get yourself a proper mining rig with at least 5 or more AMD RX 470 4GB video card if you want to earn any money. Remember you are competing against other miners with a lot more hashing power.
|
|
|
|
dawidt
Jr. Member
Offline
Activity: 54
Merit: 10
|
|
November 21, 2017, 10:35:51 PM |
|
how many sols should i get on rig with 6x380x from AMD, i'm thinking about make a rig, winter is coming.
|
|
|
|
halker2010
Sr. Member
Offline
Activity: 532
Merit: 250
The harder your life is the more meaning it has.
|
|
November 22, 2017, 05:34:09 AM |
|
how many sols should i get on rig with 6x380x from AMD, i'm thinking about make a rig, winter is coming. amd r9 380x gives around 280 - 340 sol/s based on bios and clocks, amd products are better for cryptonote a moded rx 480 can give around 750 - 1000 h/s.
|
|
|
|
Haryford
Newbie
Offline
Activity: 61
Merit: 0
|
|
November 22, 2017, 08:05:34 AM |
|
how many sols should i get on rig with 6x380x from AMD, i'm thinking about make a rig, winter is coming. amd r9 380x gives around 280 - 340 sol/s based on bios and clocks, amd products are better for cryptonote a moded rx 480 can give around 750 - 1000 h/s. I think rx 480 is not that fast.
|
|
|
|
gglala
Newbie
Offline
Activity: 16
Merit: 0
|
|
November 22, 2017, 03:41:37 PM |
|
Dear all, I need some help with the zecminer64. I downloaded the files for claymore and updated the wallet etc. When I ran the zecminer64.exe, it does not work and has error message saying the path cannot be found. Any advice on how to fix this?
|
|
|
|
Wefud
Newbie
Offline
Activity: 62
Merit: 0
|
|
November 22, 2017, 05:01:53 PM |
|
Dear all, I need some help with the zecminer64. I downloaded the files for claymore and updated the wallet etc. When I ran the zecminer64.exe, it does not work and has error message saying the path cannot be found. Any advice on how to fix this?
Can you post the message?
|
|
|
|
gglala
Newbie
Offline
Activity: 16
Merit: 0
|
|
November 23, 2017, 02:03:44 AM |
|
The error message is from a pop up window after I double clicked on the zecminer64.exe application.
"Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."
Even if I ran the file as administrator, same error message.
|
|
|
|
OneEvilRU
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 23, 2017, 05:02:45 AM |
|
@Claymore: Please add support BTG. For BTG Maximum job timeout over 20 min. 12mins for BTG is low
|
|
|
|
alisafidel58
|
|
November 23, 2017, 06:56:39 AM |
|
Im trying to mine with Radeon HD-7770 1GB, but everytime i try to run GPU mining i end up with this:
����������������������������������������������������������������ͻ � Claymore's ZCash AMD GPU Miner v12.0 Beta � ����������������������������������������������������������������ͼ
ZEC: 1 pool is specified Main ZCash pool is zec.pool.minergate.com:3357
Catalyst 15.12 is REQUIRED for best performance and compatibility 15.12 does not support some Fiji cards, use 16.3.2 for them For 4xx cards (Polaris) Crimson 16.12.2 is recommended
At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools NOTE: miner uses 3000 rounds to calculate average speed, so it may take about a minute to get correct speed. OpenCL initializing... AMD Cards available: 1 GPU #0: Capeverde, 638 MB available, 5 compute units POOL version GPU #0 is going to use too high intensity (2), not enough memory, intensity value reduced (0) GPU #0 algorithm 1, intensity 0 Total cards: 1 AMD ADL library not found. OpenCL error 0 #101 - -61 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ZEC: Stratum - connecting to 'zec.pool.minergate.com' <176.9.122.21> port 3357 ZEC: Stratum - Connected (zec.pool.minergate.com:3357) (unsecure) ZEC: Authorized Pool sets new share target: 0x0083126e (diff: 500H) GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36 GPU 0, GpuMiner kx(2) failed -36
Any tip whats wrong? I set variables in ./start.bash as described in the first post, still not working. Im running Ubuntu 16 lts. Thanks!
If you back read a page back you and i have almost the same problem, we lack the virtual memory to continue mining. I suggestion you add more memory your hard drive since you need at least 12k MB to mine.
|
|
|
|
blackwolfe82
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 23, 2017, 07:33:53 AM Last edit: November 23, 2017, 01:56:44 PM by blackwolfe82 |
|
EDIT: Problem fixed. Leaving original post intact below.
This morning I decided to check my graphics driver version and I discovered that despite me manually doing a clean install of 16.3.2 yesterday, 17.11.1 was installed at some point without my knowledge or me being prompted for it. Auto update was unchecked in the AMD app, so i'm not sure what happened nor why I wasn't even prompted for a restart after it updated.
All seems well now, though I wonder what changed in the Fiji/Fury drivers since 16.3.2 that messes with ASM?
------------ Original Post -------------
Hey guys, I got a little problem and I'm hoping that someone can help me find the fix here. I've tried google and really haven't had much luck finding a fix.
Miner v12.6 Card: AMD Radeon Fury Win10 64Bit Divers: Both 16.3.2 and 17.11.1 (current)
The problem I seem to be having is that the miner freezes on me at start, usually right after authorization. No Hash speed, or anything else. It just hangs, freezes my PC and looks like it might be crashing my graphics driver (screen goes black).
It does this if I try to use ASM. If I set "-asm 0" in the config then it doesn't crash, but I only get 314H/s, far below what I should be getting on a Fury.
-asm 0 -a 2 gets me about 380H/s
I managed to get it running with asm on only 1 time, and that gets me 480H/s
Anyone have any ideas that could help me getting the full power of this gpu?
|
|
|
|
sammy007
Legendary
Offline
Activity: 1904
Merit: 1003
|
|
November 25, 2017, 01:14:28 AM |
|
1. No need to disconnect from pool during slow blocks, it requires pools to periodically broadcast dummy jobs, it does not make any sense. Or make it configurable.
{"id": null, "method": "mining.notify", "params": ["JOB_ID", "VERSION", "PREVHASH", "MERKLEROOT", "RESERVED", "TIME", "BITS", CLEAN_JOBS]}
So in order to keep miner connected pool must force such dummy notify with last parameter (CLEAN_JOBS) set to false and incr ntime.
2. No need to treat error response to a nonsensical and non standard "extranonce.subscribe" method as "Share rejected" on launch. 3. No need to disallow different logins if `-nofee 1` specified, since there is no fee, allow any usernames to be used. At least useful for testing.
Just from 3 minutes of using it.
|
|
|
|
QNX
Newbie
Offline
Activity: 58
Merit: 0
|
|
November 25, 2017, 07:32:54 PM |
|
is this version 12.6 also vulnerable for remote attackers? last week i'm getting messages in log like: Remote management: read-only mode, command miner_file ignored Remote management: read-only only, command miner_reboot ignored every several minutes
|
|
|
|
etype
Newbie
Offline
Activity: 57
Merit: 0
|
|
November 25, 2017, 08:06:44 PM |
|
i have 2 x fury x cards water cooled , is it better to run crossfire or just 2 cards ?
|
|
|
|
Call_Me_Bambi
|
|
November 25, 2017, 09:03:23 PM |
|
i have 2 x fury x cards water cooled , is it better to run crossfire or just 2 cards ?
I've never heard of anyone mining with crossfired GPUs, in fact all the advice given (when using several GPUs) is to turn crossfire off as it can cause problems when mining. Why not just give it a go and see what happens when running crossfire, if it works, and compare it to running the cards non-crossfire.
|
|
|
|
halker2010
Sr. Member
Offline
Activity: 532
Merit: 250
The harder your life is the more meaning it has.
|
|
November 26, 2017, 03:04:27 PM |
|
how many sols should i get on rig with 6x380x from AMD, i'm thinking about make a rig, winter is coming. amd r9 380x gives around 280 - 340 sol/s based on bios and clocks, amd products are better for cryptonote a moded rx 480 can give around 750 - 1000 h/s. I think rx 480 is not that fast. It wasn't but claymore's last cryptonight update did a miracle and now my rx 480 8gb gives 1000 h/s on monero.
|
|
|
|
notbatman
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
November 27, 2017, 01:09:57 AM |
|
how many sols should i get on rig with 6x380x from AMD, i'm thinking about make a rig, winter is coming. amd r9 380x gives around 280 - 340 sol/s based on bios and clocks, amd products are better for cryptonote a moded rx 480 can give around 750 - 1000 h/s. I think rx 480 is not that fast. It wasn't but claymore's last cryptonight update did a miracle and now my rx 480 8gb gives 1000 h/s on monero. I've experienced this same miracle.
|
|
|
|
Acrefawn
Member
Offline
Activity: 118
Merit: 13
FarmWatchBot script Developer
|
|
November 27, 2017, 09:51:46 PM |
|
Hello guys (again)! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, CLAYMORE miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you.
|
FarmWatchBot script Developer
|
|
|
786sam
Member
Offline
Activity: 83
Merit: 10
|
|
November 28, 2017, 10:23:17 AM |
|
Is there a program that can switch my rig off and on e every day or 2?
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
November 28, 2017, 02:15:38 PM |
|
Is there a program that can switch my rig off and on e every day or 2?
Well you could get a simple rig resetter. See SMOS website, they sell rig resetters. Or you could build your own, its not that complicated. Or you could have a switched PDU.
|
|
|
|
|