deadsix
|
|
November 28, 2017, 02:31:32 PM |
|
Is there a program that can switch my rig off and on e every day or 2?
Well you could get a simple rig resetter. See SMOS website, they sell rig resetters. Or you could build your own, its not that complicated. Or you could have a switched PDU. Why such expensive options? Just add the following to your claymore batch file at the end: -r 1440 1440 is time in minutes, it will restart your system after 1440 minutes ( 60 x 24 ) of continuous run.
|
|
|
|
th00ber
|
|
November 28, 2017, 02:57:50 PM |
|
what is the speed and the command from these miner with R9 RURY cards? ? powerlimit -50% undervolt -100mv fan 55% Hash between 410-420H/s
|
|
|
|
ubbe1
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 28, 2017, 06:05:56 PM |
|
Hi. when I read my log i find this: 19e8 watchdog - thread 0, hb time 454 18:30:42:722 19e8 watchdog - thread 1, hb time 219 18:30:42:722 19e8 watchdog - thread 2, hb time 110 18:30:42:722 19e8 watchdog - thread 3, hb time 329 18:30:43:613 17b8 warning: solutions buf overflow, 172 > 40 18:30:45:160 578 warning: solutions buf overflow, 72 > 40 18:30:46:050 578 warning: solutions buf overflow, 120 > 40 18:30:47:050 231c warning: solutions buf overflow, 301 > 40 18:30:48:816 231c warning: solutions buf overflow, 108 > 40 18:30:51:254 634 warning: solutions buf overflow, 91 > 40 18:30:53:254 231c warning: solutions buf overflow, 912 > 40 18:30:58:239 17b8 warning: solutions buf overflow, 46 > 40 18:30:59:239 634 warning: solutions buf overflow, 294 > 40 18:31:01:786 17b8 warning: solutions buf overflow, 239 > 40 18:31:02:896 578 warning: solutions buf overflow, 142 > 40 18:31:05:005 634 warning: solutions buf overflow, 397 > 40 18:31:07:443 231c warning: solutions buf overflow, 219 > 40 18:31:08:115 634 warning: solutions buf overflow, 171 > 40 18:31:09:553 578 warning: solutions buf overflow, 439 > 40 18:31:10:662 17b8 warning: solutions buf overflow, 735 > 40 18:31:12:209 578 warning: solutions buf overflow, 282 > 40 18:31:12:881 19e8 GPU0 t=52C fan=66% 18:31:12:881 19e8 em hbt: 0, fm hbt: 62, 18:31:12:881 19e8 watchdog - thread 0, hb time 437 18:31:12:881 19e8 watchdog - thread 1, hb time 218 18:31:12:881 19e8 watchdog - thread 2, hb time 109 18:31:12:881 19e8 watchdog - thread 3, hb time 328 18:31:13:444 634 warning: solutions buf overflow, 131 > 40 18:31:15:428 231c warning: solutions buf overflow, 219 > 40 18:31:16:100 634 warning: solutions buf overflow, 147 > 40 18:31:22:539 231c ZEC: put share nonce b0da 18:31:22:539 231c ZEC round found 1 shares 18:31:22:554 284c ZEC: 11/28/17-18:31:22 - SHARE FOUND - (GPU 0)
Is there a solution to solve those? warning: solutions buf overflow, 439 > 40? Anything to do? regards ubbe
|
|
|
|
AVM
Newbie
Offline
Activity: 8
Merit: 0
|
|
November 29, 2017, 01:08:51 AM |
|
is this version 12.6 also vulnerable for remote attackers? last week i'm getting messages in log like: Remote management: read-only mode, command miner_file ignored Remote management: read-only only, command miner_reboot ignored every several minutes Have you solved this problem
|
|
|
|
Nekor
Newbie
Offline
Activity: 28
Merit: 0
|
|
November 29, 2017, 02:15:58 AM |
|
I still can't get this to work. The console window closes out after about 15 seconds, Zecminer doesn't start (just shows the commands in my bat file). Even add PAUSE did nothing. Can't create log file either.
No idea why as I've disabled my AV/Win Defender. Using Crimson ReLive drivers with R9 270X (also have a GTX 1070) in my desktop. Other rigs are fine.
|
|
|
|
halker2010
Sr. Member
Offline
Activity: 532
Merit: 250
The harder your life is the more meaning it has.
|
|
November 29, 2017, 09:48:06 AM |
|
I still can't get this to work. The console window closes out after about 15 seconds, Zecminer doesn't start (just shows the commands in my bat file). Even add PAUSE did nothing. Can't create log file either.
No idea why as I've disabled my AV/Win Defender. Using Crimson ReLive drivers with R9 270X (also have a GTX 1070) in my desktop. Other rigs are fine.
if pause at the end doesn't work its windows issue you have to be able to see what's wrong with adding the pause try reinstalling the windows.
|
|
|
|
|
ubbe1
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 29, 2017, 08:40:59 PM |
|
Hi. is this Ok numbers for one Vega 64 mining zcash on flypool using diff: 16000? https://imgur.com/a/vL385regards Ubbe
|
|
|
|
Maniac479
Member
Offline
Activity: 69
Merit: 10
|
|
November 30, 2017, 06:46:47 AM |
|
I've been using this miner, mining with Nicehash. I've been taking a look at it. I notice that the miner is mining on the equihash pool. The config file say it's flypool. How does the miner bypass the config file and mine on equihash even though it says flypool? In the epools.txt file they are all # out. I am sure some people know what's going on here!
Does it make sense for me to try and figure out how to mine ZCash directly to a pool myself rather than go thru Nicehash? If so, how do I do that? I tried just substituting my own ZCash address in the config file. But I could get no accepted shares, and really wasn't even sure what pool I was mining on. Again, I thought it was flypool because that's what the config file says but now I see it's using the equihash pool.
It seems to me that if I go directly to a pool I can avoid the Nicehash fees. I must be getting fee'd by pools twice, once from the actual pool and then again from Nicehash.
|
|
|
|
sir_xarn
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 30, 2017, 12:05:59 PM |
|
Hi guys,
Its my first post here, hope someone can help.
I bought recently R9 Nano at discounted price to try to mine zcash.
Previously I used R9 280X, 16.7.3 drivers and got stable 290-300 H/s, mining with Claymore 12.0 Beta (eventually 12.4 or 12.6, but 12.0 worked best).
My CPU is Core i3 43130, PSU - Corsair 600W
Now there seems to be a problem.
I get around 320 H/s (16.3.2 drivers, powertune +50), but still, the rig restars after around one hour (so I cant work properly overnight)
Only Claymore 12.6 works, other versions tend to crash or show 0 H/s. ASM algorithm doesnt work (either shows 0 H/s or WatchDog restarts mining). I tried the recommended 16.3.2 drivers, 16.7.3 which worked fine on 280X and latest.
Also - when I plugged both Nano and 280x, Nano got 250 H/s, 280x got 290 h/s. (but, as my PSU got only 600W i didnt run this in long term)
What do you guys recommend to do? Fury's/Nano should get at least 400 h/s....
|
|
|
|
Call_Me_Bambi
|
|
November 30, 2017, 06:55:32 PM |
|
I've been using this miner, mining with Nicehash. I've been taking a look at it. I notice that the miner is mining on the equihash pool. The config file say it's flypool. How does the miner bypass the config file and mine on equihash even though it says flypool? In the epools.txt file they are all # out. I am sure some people know what's going on here!
Does it make sense for me to try and figure out how to mine ZCash directly to a pool myself rather than go thru Nicehash? If so, how do I do that? I tried just substituting my own ZCash address in the config file. But I could get no accepted shares, and really wasn't even sure what pool I was mining on. Again, I thought it was flypool because that's what the config file says but now I see it's using the equihash pool.
It seems to me that if I go directly to a pool I can avoid the Nicehash fees. I must be getting fee'd by pools twice, once from the actual pool and then again from Nicehash.
Claymore's miners ingore anything in the config file if there are two, or more options, in the .bat file (I don't know if the .exe is considered an "option"). See OP for more on this. You may be getting burned not two times but three times; a fee from Nicehash a fee from the pool AND a fee from Claymore's miner.
|
|
|
|
Maniac479
Member
Offline
Activity: 69
Merit: 10
|
|
November 30, 2017, 07:00:01 PM |
|
I've been using this miner, mining with Nicehash. I've been taking a look at it. I notice that the miner is mining on the equihash pool. The config file say it's flypool. How does the miner bypass the config file and mine on equihash even though it says flypool? In the epools.txt file they are all # out. I am sure some people know what's going on here!
Does it make sense for me to try and figure out how to mine ZCash directly to a pool myself rather than go thru Nicehash? If so, how do I do that? I tried just substituting my own ZCash address in the config file. But I could get no accepted shares, and really wasn't even sure what pool I was mining on. Again, I thought it was flypool because that's what the config file says but now I see it's using the equihash pool.
It seems to me that if I go directly to a pool I can avoid the Nicehash fees. I must be getting fee'd by pools twice, once from the actual pool and then again from Nicehash.
Claymore's miners ingore anything in the config file if there are two, or more options, in the .bat file (I don't know if the .exe is considered an "option"). See OP for more on this. You may be getting burned not two times but three times; a fee from Nicehash a fee from the pool AND a fee from Claymore's miner. Yeah I thought of that. There's nothing in the .bat file other than a command to start the miner. I'll just have to read up more on the miner and see if I can get it to work without the Nicehash front end. The thing is, Nicehash provides a windows-friendly front end to the miner. That makes a big difference to people like me.
|
|
|
|
deadley
Legendary
Offline
Activity: 2562
Merit: 1064
|
|
December 02, 2017, 12:04:25 PM |
|
Is claymore miner support 32 bit wintow 10 ?
Will it good with Nvidia 840 M GPU card?
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
December 02, 2017, 02:48:46 PM |
|
Is claymore miner support 32 bit wintow 10 ?
Will it good with Nvidia 840 M GPU card?
Unfortunately No, It doesn't support 32bit, its in the first page posted by the OP. Will it good with Nvidia 840 M GPU card?
Is this a built in GPU cards on laptop? just in case it is, then its not advisable to do mining on laptop
|
|
|
|
gldi0001
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 02, 2017, 08:15:56 PM |
|
tired to mine BTG mining by official Bitcoingold miner on my 2 of Vega 56 but got only around 450 H/s.... Is this usual? seems like much better to mine xmr and buy BTG after that lol
|
|
|
|
QNX
Newbie
Offline
Activity: 58
Merit: 0
|
|
December 03, 2017, 09:07:02 PM |
|
is this version 12.6 also vulnerable for remote attackers? last week i'm getting messages in log like: Remote management: read-only mode, command miner_file ignored Remote management: read-only only, command miner_reboot ignored every several minutes Have you solved this problem yeap, i've disabled forwarding and closed external access completely
|
|
|
|
Iku
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 05, 2017, 06:42:19 AM |
|
Having a hellish time with one of my RX 570's.
It is working fine, reporting good temps, fan speed, etc. Then, all of a sudden, the fan goes to 8%. Then drops, slowly. Card temp skyrockets of course.
Tried running at a constant speed with Afterburner, tried with claymore fan options turned off, etc.
Anyone experienced this? No issues until after I updated to new version of claymore, and new drivers (patched). Everything was great for a while then it broke. (Have tried my old version of Claymore, no change)
|
|
|
|
amuleth
Newbie
Offline
Activity: 45
Merit: 0
|
|
December 06, 2017, 12:24:12 PM Last edit: December 06, 2017, 12:46:52 PM by amuleth |
|
I'm getting 299 h/s with R280X and 266 h/s with RX470 4GB (ASUS Strix). How can I improve the speed of RX470?
|
|
|
|
nowaltcoin
|
|
December 06, 2017, 12:50:43 PM |
|
Dear Mister (Sir) Claymore,
will there be a chance for a new version (12.7?) not only mining Zcash/BTG but also MNX ?
At the moment there is a lack of a windows miner for it!
Have a nice day
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
nanona
|
|
December 07, 2017, 01:18:30 PM |
|
@Claymore Please remove the nicehash garbage and don't support them anymore, even if they come back (I hope not). They are a botnet for hire and should rot in hell.
|
|
|
|
|